Hanes Supply is proud to be a part of many significant rigging and lifting projects.
We would like to reserve this page to display some of these rigging and lifting projects.
PROJECT: ROTOR LIFT |
|
An Electric Power Producer needed to update the Rigging for their 80 ton Rotor. Hanes Supply conducted an on-site review with Engineering and Rigging Superintendents resulting in the following recommendations. Wire Rope Slings to be replaced with TWIN Path High Performance Slings. To accomplish this, the following was required:
Top Rigging:
- 2 each TPXC 10,000 x 10’ with special 2” Alloy Oblong Links each end, with Load Bars.
Capacity; Vertical at 100,000 lbs. and Basket at 200,000 lbs.
Bottom Rigging:
- 2 each TPXC 12,500 x 11’. Capacity; Vertical at 125,000 lbs. and Basket at 250,000 lbs.
- 4 each Crosby S-253 “Sling Saver” Synthetic Shackles. Capacity at 35 tons.
- 4 each Crosby G-209 Galvanized Shackles. Capacity at 35 Tons.
- 2 each “Quick” Removable Wear Pads for TPCX 12,500 x 36”.
- 4 each Special Washers for existing Lifting Beam, width .75” “Thick II” 4.25” diameter center hole.
5.5” center to round top. 4.5” center to flat bottom.
Our customer was extremely pleased with the Ergonomics of their New Rigging.
If you are in need of a Special Lifting Application, contact one of our Representatives. Hanes Supply, Inc., will work with you, to create the best solution, to meet your needs.
|
Dick Streicher
Hanes Supply, Inc.
Contact via e-mail - click here
Project Date: March 2004
OTHER RIGGING PROJECTS |
|
