Rotary Hammer (Dead or Alive) Trade-in Offer from DeWalt.
Currently until March 31, 2010 DeWalt is offering up to $100 for Trading-in your non-DeWalt Rotary Hammer with the purchase of a New DeWalt Rotary Hammer. Contact your Hanes Supply Representative for details of this offer or click on the DeWalt logo for our flyer on this offer!

NEW! Hanes Supply is proud to announce the arrival of the new Crosby S-209T Theatrical Shackle.
Same Dependability and Durability with a new finish. Sizes: 3/8” through 3/4”. Capacities: 1 through 4-3/4 metric tonnes. Forged - Quenched and Tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Flat black baked on powder coat finish. Fatigue Rated. Industry leading 6 to 1 design factor,Screw pin anchor shackles meet the performance requirement of Federal Specification RR-C-271D Type IV A, Grade a, Class 2, except for those provisions required of the contractor.Meets the performance requirements of EN13889:2003.Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Contact your Hanes Supply Representative for inquires on any and all Crosby products.

NEW! Hanes Supply of South Carolina, Inc., CCISCO, has their own test bed machine. Their machine incorporates two load ranges and has proof load testing capabilities of 600,000 pounds maximum and a minimum testing of 7,000 pounds. This machine has break testing capabilities to the full 600,000 pounds. Both the high and low load ranges have 6' strokes. The machine is 100' long and has a maximum specimen testing length of approximately 84' and a minimum of 3'. This machine is a fully automated, computer-controlled machine capable of cycle testing as well as elongation measurement. Chant Engineering calibrates the machine to the standard of ASTM E-4, which is fully traceable to NIST. The machine is manufactured at Chant Engineering’s corporate headquarters located in New Britain, Pennsylvania, USA.

Proof testing is also available at other Hanes Supply locations. Contact your Hanes Supply Representative for further information about all of our Proof Testing Capabilities.

Most synthetic sling accidents are caused by cutting. There are many kinds of protective sleeves and pads available, but only two synthetic protectors provide adequate cut protection: CornerMax pads and CornerMax sleeves. They have been engineered and tested to provide 25,000 lbs. of protection per inch of sling width (4464 kg per centimeter of sling width). CornerMax pads are designed for 90° straight edges. CornerMax sleeves are for other edges – curved, rough, or irregular – and are the protection of choice for I-beams. For synthetic slings, the most critical decision is whether cut protection is needed.

Contact your Hanes Supply Representative for Rigging Solutions in making the right choice for protecting your rigging. For our Corner Protection flyer click here.

Playing Detective? Check out the new RIDGID Inspection and Locating product line!
RIDGID inspection cameras allow you to offer more services and provides you with the tools you need to detect and diagnose the unreachable. Other products in this line include Utility Line Locators, transmitters, accessories and more!

For additional produt information click here.

Confined Space Tripod Kit!
Contains tripod, 60' - 3-way SRL and mounting bracket,tripod bag and equipment bag for storage and transport.
Meets the requirements of OSHA 1926 and ANSI Z359.

For additional product information click here.

With the oscillating movement & user-friendly accessories, the FEIN MULTIMASTER is an unbeatably versatile, high-precision specialist tool – perfect for all professional outfitting, renovation & repair work.
Work without kick-back into the smallest corners and on edges.
High sanding capacity with virtually no pressure force required.
Perfectly smooth running; the tool does not move on its own.
Extremely versatile compared with competitive products, with universal suitability for a wealth of applications.
Very safe to handle.

For more product information click here.

AS160 Brick & Mortar Saw -"Think Outside the Circle"
The Award Winning AS160 Brick and Mortar Saw featuring Allsaw Technology uses a unique patented orbital cutting motion with two forward facing blades that combine to perform both a hammering and cutting action, allowing for clear visibility and empowers the professional with the ability to cut square, cut deep, cut dry, and cut safe with no flydust. The AS160 offers extreme levels of precision, accuracy and control allowing the tool to be used for a wide range of applications, from heritage masonry work to electrical installations.

For more details click here.

Hanes Supply is proud to introduce Arc Flash products into our inventory!
ARC FLASH Protective Equipment is designed to protect employees, in compliance with ASTM requirements,OSHA regulations and NFPA standards, from the hazards of shock, electrocution, arc flash, and arc blast. Hanes Supply is your resource for Personal Protection Equipment (PPE) such as insulated tools, insulated rubber gloves, protective gloves, coveralls, jacket and pants, face shields and more.

For more product information click here.

Hanes Supply Spill Control
Let Hanes Supply find the Spill Kit that best suits your needs.
For additional product information click here.