Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
-
![Milwaukee® 14-46-2018 Brush Card Assembly, Use with 0726-20 Hammer Drill]()
Milwaukee® 14-46-2018 Brush Card Assembly, Use with 0726-20 Hammer Drill HSI#: PTS20618Call for availability$12.21$11.52Savings: $0.69 (6%) -
![Milwaukee® 42-52-0390 End Cap, Use with 0726-20 Hammer Drill]()
Milwaukee® 42-52-0390 End Cap, Use with 0726-20 Hammer Drill HSI#: 42-52-0390-11961Call for availability$2.40$2.40 -
![Milwaukee® 14-46-2024 Brush Card Assembly, Use with 2663-20 Square Impact Wrench]()
Milwaukee® 14-46-2024 Brush Card Assembly, Use with 2663-20 Square Impact Wrench HSI#: 14-46-2024-11961Call for availability$11.61$11.61 -
![Milwaukee® MX Fuel™ 49-67-0105 Core Drill Mounting Plate, Use with MX Fuel™ Handheld Core Drill]()
Milwaukee® MX Fuel™ 49-67-0105 Core Drill Mounting Plate, Use with MX Fuel™ Handheld Core Drill HSI#: 49-67-0105-11961Call for availability$111.77$111.77 -
![Milwaukee® MX Fuel™ 49-67-0125 Core Drill Trigger Lock, Use with MX Fuel™ Handheld Core Drill]()
Milwaukee® MX Fuel™ 49-67-0125 Core Drill Trigger Lock, Use with MX Fuel™ Handheld Core Drill HSI#: 49-67-0125-11961Call for availability$40.81$40.81 -
![DeWALT® DCN6901 Return Spring Kit, Use with DCN690 and DCN692 Cordless Framing Nailer]()
DeWALT® DCN6901 Return Spring Kit, Use with DCN690 and DCN692 Cordless Framing Nailer HSI#: DCN6901-10254Call for availability$34.64$34.64 -
![Greenlee® HB.8112 Die Pin Kit, for Use with W-Style Dies]()
Greenlee® HB.8112 Die Pin Kit, for Use with W-Style Dies HSI#: HB.8112-11113Call for availability$41.36$41.36 -
![Milwaukee® 40-50-0585 Cutting Spring, Use with 2471-059 M12™ 12 VDC Copper Tubing Cutter]()
Milwaukee® 40-50-0585 Cutting Spring, Use with 2471-059 M12™ 12 VDC Copper Tubing Cutter HSI#: 40-50-0585-11961Call for availability$2.04$2.04 -
![Milwaukee® M12 Fuel™ 49-16-2557 Ratchet Protective Tool Boot, Use with M12 Fuel™ 2557-20 Serial J19A 3/8 in Ratchet, 3/8 in]()
Milwaukee® M12 Fuel™ 49-16-2557 Ratchet Protective Tool Boot, Use with M12 Fuel™ 2557-20 Serial J19A 3/8 in Ratchet, 3/8 in HSI#: 49-16-2557-11961Call for availability$35.00$35.00 -
![Milwaukee® M12 Fuel™ 49-16-2558 Ratchet Protective Tool Boot, Use with M12 Fuel™ 2558-20 Serial J20A 1/2 in Ratchet, 1/2 in]()
Milwaukee® M12 Fuel™ 49-16-2558 Ratchet Protective Tool Boot, Use with M12 Fuel™ 2558-20 Serial J20A 1/2 in Ratchet, 1/2 in HSI#: 49-16-2558-11961Call for availability$35.00$35.00 -
![Milwaukee® M12 Fuel™ 49-16-2556 Protective Tool Boot, Use with M12 Fuel™ 2556-20 1/4 in Ratchet]()
Milwaukee® M12 Fuel™ 49-16-2556 Protective Tool Boot, Use with M12 Fuel™ 2556-20 1/4 in Ratchet HSI#: 49-16-2556-11961Call for availability$45.00$23.98Savings: $21.02 (47%) -
![Milwaukee® 49-90-1953 Main Filter, Use with 8960-20 8 gal Dust Extractor, 99.9% Average Atmospheric Efficiency]()
Milwaukee® 49-90-1953 Main Filter, Use with 8960-20 8 gal Dust Extractor, 99.9% Average Atmospheric Efficiency HSI#: 49-90-1953-11961Call for availability$111.72$111.72 -
![Milwaukee® M12™ ProPEX® 49-16-2404 Expansion Head, Use with M12™, M18™ and Uponor® Tools, 1/2 in OD Capacity Tubing]()
Milwaukee® M12™ ProPEX® 49-16-2404 Expansion Head, Use with M12™, M18™ and Uponor® Tools, 1/2 in OD Capacity Tubing HSI#: 49-16-2404-11961Call for availability$88.92$88.92 -
![Ridgid® 47753 Latching Round Crimp Head Only, for Use with Model RE 60 Electrical Tool]()
Ridgid® 47753 Latching Round Crimp Head Only, for Use with Model RE 60 Electrical Tool HSI#: 47753-12632Call for availability$851.57$851.57 -
![DeWALT® N309479 Brush Ring Assembly, Pkg ft D N157135]()
DeWALT® N309479 Brush Ring Assembly, Pkg ft D N157135 HSI#: N309479-10254Call for availability$11.16$11.16 -
![Milwaukee® 49-16-750A Crimping Jaw, For Use with M18™ Force Logic™ 2679-20 and 49-16-U111 600 kcmil Crimper]()
Milwaukee® 49-16-750A Crimping Jaw, For Use with M18™ Force Logic™ 2679-20 and 49-16-U111 600 kcmil Crimper HSI#: 49-16-750A-11961Call for availability$1,199.00$1,199.00 -
![Milwaukee® 49-16-B600C THHN/XHHW Bushing, For Use with M12™ and M18™ Cable Strippers, 600 kcmil]()
Milwaukee® 49-16-B600C THHN/XHHW Bushing, For Use with M12™ and M18™ Cable Strippers, 600 kcmil HSI#: 49-16-B600C-11961Call for availability$49.99$49.99 -
![Milwaukee® 49-16-2778 Fine Stranded Wire Cutting Jaw, For Use with 2672-20 M18™ Force Logic™ Cable Cutter]()
Milwaukee® 49-16-2778 Fine Stranded Wire Cutting Jaw, For Use with 2672-20 M18™ Force Logic™ Cable Cutter HSI#: 49-16-2778-11961Call for availability$558.85$558.85 -
![Milwaukee® 49-16-B500C THHN/XHHW Bushing, For Use with M12™ and M18™ Cable Strippers, 500 kcmil]()
Milwaukee® 49-16-B500C THHN/XHHW Bushing, For Use with M12™ and M18™ Cable Strippers, 500 kcmil HSI#: 49-16-B500C-11961Call for availability$49.99$49.99 -
![Milwaukee® 22-18-0025 Brush, For Use with 6232-20 and 6238-20 Band Saw]()
Milwaukee® 22-18-0025 Brush, For Use with 6232-20 and 6238-20 Band Saw HSI#: 22-18-0025-11961Call for availability$2.38$2.38 -
![DeWALT® DCE1501 Replacement Cable Cutting Blade, For Use with DCE150D1, DCE1501B Cable Cutting Tool, 750 kcmil Copper/1000 kcmil Aluminum]()
DeWALT® DCE1501 Replacement Cable Cutting Blade, For Use with DCE150D1, DCE1501B Cable Cutting Tool, 750 kcmil Copper/1000 kcmil Aluminum HSI#: DCE1501-10254Call for availability$214.46$214.46 -
![DeWALT® DCS368W1 Brushless Reciprocating Saw, 1-1/8 in L Stroke, 0 to 3,000 spm, 20V]()
DeWALT® DCS368W1 Brushless Reciprocating Saw, 1-1/8 in L Stroke, 0 to 3,000 spm, 20V HSI#: DCS368W1-10254Call for availability$360.20$360.20 -
![Ingersoll Rand® BMDLN-8 Long Medium Duty Cable Balancer, 13.2 to 17.6 lb Load, Adjustable Capacity, Aluminum Cast Body]()
Ingersoll Rand® BMDLN-8 Long Medium Duty Cable Balancer, 13.2 to 17.6 lb Load, Adjustable Capacity, Aluminum Cast Body HSI#: MAT55012Call for availability$291.00$291.00 -
![Ingersoll Rand® BMDLN-10 Long Medium Duty Cable Balancer, 17.6 to 22 lb Load, Adjustable Capacity, Aluminum Cast Body]()
Ingersoll Rand® BMDLN-10 Long Medium Duty Cable Balancer, 17.6 to 22 lb Load, Adjustable Capacity, Aluminum Cast Body HSI#: MAT55013Call for availability$318.00$318.00 -
![Ingersoll Rand® BMDLN-6 Long Medium Duty Cable Balancer, 8.8 to 13.2 lb Load, Adjustable Capacity, Aluminum Cast Body]()
Ingersoll Rand® BMDLN-6 Long Medium Duty Cable Balancer, 8.8 to 13.2 lb Load, Adjustable Capacity, Aluminum Cast Body HSI#: MAT55011Call for availability$264.00$264.00 -
![Makita® 193007-4 Repair Kit, for use with Makita® AN611 Siding Coil Nailer]()
Makita® 193007-4 Repair Kit, for use with Makita® AN611 Siding Coil Nailer HSI#: 193007-4-11803Call for availability$34.37$34.37 -
![Makita® SW400MP Power Sweep Attachment, for use with Makita® EX2650LH, DUX60Z Couple Shaft Power Heads]()
Makita® SW400MP Power Sweep Attachment, for use with Makita® EX2650LH, DUX60Z Couple Shaft Power Heads HSI#: SW400MP-11803Call for availability$701.86$701.86 -
![Milwaukee® 48-44-2872 2 pc Upper/Lower Replacement Cutting Die Set]()
Milwaukee® 48-44-2872 2 pc Upper/Lower Replacement Cutting Die Set HSI#: TAC20570Call for availability$93.18$93.18 -
![Milwaukee® 43-62-0885 Side Handle, for use with 0244-1 Serial 664-83073 1/2 in Magnum Hole Shooter, Cordless D-Handle Rad]()
Milwaukee® 43-62-0885 Side Handle, for use with 0244-1 Serial 664-83073 1/2 in Magnum Hole Shooter, Cordless D-Handle Rad HSI#: 43-62-0885-11961Call for availability$4.45$4.45 -
![Powermatic® 1792208 Precut Abrasive Strips, for use with PM2244 Drum Sander, 220 Grit]()
Powermatic® 1792208 Precut Abrasive Strips, for use with PM2244 Drum Sander, 220 Grit HSI#: 1792208-13455Call for availability$55.78$55.78 -
![Ingersoll Rand® BMDS-2 Medium Duty Short Cable Balancer, 2.2 to 5.5 lb Load, Adjustable Capacity, Aluminum Cast Body]()
Ingersoll Rand® BMDS-2 Medium Duty Short Cable Balancer, 2.2 to 5.5 lb Load, Adjustable Capacity, Aluminum Cast Body HSI#: MAT55005Call for availability$217.16$217.16 -
![Milwaukee® 3000 MX Fuel™ Compact Core Drill Stand, for use with MX Fuel™ MXF301 Handheld Core Drill]()
Milwaukee® 3000 MX Fuel™ Compact Core Drill Stand, for use with MX Fuel™ MXF301 Handheld Core Drill HSI#: 3000-11961Call for availability$1,570.12$1,570.12 -
![Stihl® 1106 190 0600 Starter Return Spring Kit, Outbushman]()
Stihl® 1106 190 0600 Starter Return Spring Kit, Outbushman HSI#: PTS16135Call for availability$33.35$33.35 -
![Milwaukee® 48-08-2744 M18™ Fuel™ Cordless Extended Capacity Magazine, for use with M18™ Fuel™ 2744-20 21° Framing Nailer]()
Milwaukee® 48-08-2744 M18™ Fuel™ Cordless Extended Capacity Magazine, for use with M18™ Fuel™ 2744-20 21° Framing Nailer HSI#: 48-08-2744-11961Call for availability$139.98$139.98 -
![Milwaukee® 49-16-2554 Protective Boot, for use with M12™ Fuel™ 2554-20, 2555-20, 2555P-20 3/8 in and 1/2 in Stubby Impact Driver]()
Milwaukee® 49-16-2554 Protective Boot, for use with M12™ Fuel™ 2554-20, 2555-20, 2555P-20 3/8 in and 1/2 in Stubby Impact Driver HSI#: 49-16-2554-11961Call for availability$35.00$35.00
The browser you are using is not compatible with our site. For a better experience on our website please use one of these browsers:
Google Chrome | Microsoft Edge | Mozilla Firefox | Apple Safari Update Browser
Google Chrome | Microsoft Edge | Mozilla Firefox | Apple Safari Update Browser
Toggle Nav
Questions? Give Us A Call
Rigging Solutions
HSI Services
Shop by brand
FEATURED BRANDS
Resources
About Us
- All Products
- Slings, Lifting & Rigging
- Fall Protection
- Construction Supply / Jobsite Ops
-
Safety & Security
-
Power Tools
-
Hand Tools
Featured Products
-
![Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL]()
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
-
![Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL]()
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
-
![Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade]()
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
-
![Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple]()
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
-
![Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle]()
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
-
-
Material Handling, Hydraulics & Storage
- MRO Supplies
- Cutting Tools & Metalworking
- Abrasives
-
Fasteners & Hardware
Featured Products
-
![BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy]()
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
-
![DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated]()
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
-
![BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS]()
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
-
![Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank]()
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
-
![Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade]()
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
-
Search
Quick Order Pad
