Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Klein® D20009ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL, 7-9/32 in Handle Length, Plastic Handle, Black Oxide
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple, 5/16, 3/8, 1/2 in Staple Length
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Pneumatic Scalers - Needle
-
![CP P001853 Throttle Valve Spring, for use with CP4181 Puler, CP4181 Puser, CP745 Hammer and CP4123 Chipping Hammer]()
CP P001853 Throttle Valve Spring, for use with CP4181 Puler, CP4181 Puser, CP745 Hammer and CP4123 Chipping Hammer HSI#: PTS39301In stock$2.04$2.04 -
![CP P001799 Throttle Valve, for use with CP745 Hammer, CP4181 Puler and CP4181 Puser]()
CP P001799 Throttle Valve, for use with CP745 Hammer, CP4181 Puler and CP4181 Puser HSI#: PTS39303In stock$7.08$7.08 -
![CP P001873 Throttle Valve Plug, for use with CP4181 Puler, CP4181 Puser, CP745 Hammer and CP4123 Chipping Hammer]()
CP P001873 Throttle Valve Plug, for use with CP4181 Puler, CP4181 Puser, CP745 Hammer and CP4123 Chipping Hammer HSI#: PTS39302In stock$4.92$4.92 -
![JET® 505801 R8 Series Needle Scaler, 4600 BPM, 1-1/8 in L Stroke, 3 CFM Air Flow, 90 psi]()
JET® 505801 R8 Series Needle Scaler, 4600 BPM, 1-1/8 in L Stroke, 3 CFM Air Flow, 90 psi HSI#: TPN52510In stock$659.99$659.99 -
![CP P083071 O-Ring for use with CP7750 Impact Wrench, and CP 0017 SVR, Chipping Hammer]()
CP P083071 O-Ring for use with CP7750 Impact Wrench, and CP 0017 SVR, Chipping Hammer HSI#: PTS39335In stock$0.52$0.52 -
![CP C068659 Ball Bearing, For Use with CP772H, CP796, CP0611]()
CP C068659 Ball Bearing, For Use with CP772H, CP796, CP0611 HSI#: C068659-10404In stock$31.19$31.19 -
![Milwaukee® 49-16-2661LBS Mandrel Stopper, for use with M18]()
Milwaukee® 49-16-2661LBS Mandrel Stopper, for use with M18 HSI#: 49-16-2661LBS-11961Call for availability$49.00$49.00 -
![Milwaukee® 49-16-2661HT M18™ Fuel™ One-Key™ Fastener Adapter, for use with HUCK TM Nose Tip Model 99-3464, 2661 M18™ FUEL]()
Milwaukee® 49-16-2661HT M18™ Fuel™ One-Key™ Fastener Adapter, for use with HUCK TM Nose Tip Model 99-3464, 2661 M18™ FUEL HSI#: 49-16-2661HT-11961Call for availability$49.00$49.00 -
![Milwaukee® 49-16-2660RP Retention Nose Piece, for use with M18™ Fuel™ 1/4 in Blind Rivet Tool with 2660-20 One-Key™]()
Milwaukee® 49-16-2660RP Retention Nose Piece, for use with M18™ Fuel™ 1/4 in Blind Rivet Tool with 2660-20 One-Key™ HSI#: 49-16-2660RP-11961Call for availability$49.00$49.00 -
![Milwaukee® 49-16-2660NR Non-Retention Nose Piece, for use with M18™ Fuel™ 1/4 in Blind Rivet Tool with 2660-20 One-Key™]()
Milwaukee® 49-16-2660NR Non-Retention Nose Piece, for use with M18™ Fuel™ 1/4 in Blind Rivet Tool with 2660-20 One-Key™ HSI#: 49-16-2660NR-11961Call for availability$49.00$49.00
