Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Hammering & Demolition Power Tools
-
![Bosch HS2167 Resharpenable Asphalt Cutter, 5 in W Blade, 19 in L, 1-1/8 in Hex Shank, Use with 1-1/8 in Hex Shank Breaker Hammers]()
Bosch HS2167 Resharpenable Asphalt Cutter, 5 in W Blade, 19 in L, 1-1/8 in Hex Shank, Use with 1-1/8 in Hex Shank Breaker Hammers HSI#: HS2167-12650Call for availability$132.69$132.69 -
![JET® J0101S Replacement Standard Spring Retainer, Use with JSG Riveting Hammers]()
JET® J0101S Replacement Standard Spring Retainer, Use with JSG Riveting Hammers HSI#: TPN52502Call for availability$23.55$23.55 -
![JET® F25-02 Throttle Bushing, Use with F-25 Flux Chipper]()
JET® F25-02 Throttle Bushing, Use with F-25 Flux Chipper HSI#: PTS32501Call for availability$43.40$43.40 -
![DeWALT® DW5785 Ground Rod Driver, Use with All Brands of 3/4 in Hex x 21/32 in Round Spline Shank Chipping and Demolition Hammers]()
DeWALT® DW5785 Ground Rod Driver, Use with All Brands of 3/4 in Hex x 21/32 in Round Spline Shank Chipping and Demolition Hammers HSI#: TCU17725Call for availability$82.50$82.50 -
![Bosch HS1922 Clay Spade, 4-1/2 in Blade, 17 in L, Use with Bosch SDS-Max® Hammer, Steel]()
Bosch HS1922 Clay Spade, 4-1/2 in Blade, 17 in L, Use with Bosch SDS-Max® Hammer, Steel HSI#: HS1922-12650Call for availability$104.19$104.19 -
![Bosch HS1909 Bushing Tool, 16-Tooth Head, 1-3/4 in Square, Use with SDS-Max® Hammers, Competitive SDS-Max® Driver Hammers and Hilti Hammers]()
Bosch HS1909 Bushing Tool, 16-Tooth Head, 1-3/4 in Square, Use with SDS-Max® Hammers, Competitive SDS-Max® Driver Hammers and Hilti Hammers HSI#: HS1909-12650Call for availability$88.49$88.49 -
![Milwaukee® MX Fuel™ MXF368-1XC Cordless Breaker, 120 V, MX Fuel™ Redlithium™ Li-Ion Battery]()
Milwaukee® MX Fuel™ MXF368-1XC Cordless Breaker, 120 V, MX Fuel™ Redlithium™ Li-Ion Battery HSI#: MXF368-1XC-11961Call for availability$2,599.00$2,599.00 -
![Milwaukee® 2911-20 M18 Fuel™ Cordless Variable Speed Concrete Pencil Vibrator, M18™ Battery Pack, 1.8 hp Power Rating, 18V]()
Milwaukee® 2911-20 M18 Fuel™ Cordless Variable Speed Concrete Pencil Vibrator, M18™ Battery Pack, 1.8 hp Power Rating, 18V HSI#: 2911-20-11961Call for availability$499.00$499.00 -
![Milwaukee® 49-16-2661LBS Mandrel Stopper, for use with M18]()
Milwaukee® 49-16-2661LBS Mandrel Stopper, for use with M18 HSI#: 49-16-2661LBS-11961Call for availability$49.00$49.00 -
![Milwaukee® 49-16-2661HT M18™ Fuel™ One-Key™ Fastener Adapter, for use with HUCK TM Nose Tip Model 99-3464, 2661 M18™ FUEL]()
Milwaukee® 49-16-2661HT M18™ Fuel™ One-Key™ Fastener Adapter, for use with HUCK TM Nose Tip Model 99-3464, 2661 M18™ FUEL HSI#: 49-16-2661HT-11961Call for availability$49.00$49.00 -
![Milwaukee® 49-16-2660RP Retention Nose Piece, for use with M18™ Fuel™ 1/4 in Blind Rivet Tool with 2660-20 One-Key™]()
Milwaukee® 49-16-2660RP Retention Nose Piece, for use with M18™ Fuel™ 1/4 in Blind Rivet Tool with 2660-20 One-Key™ HSI#: 49-16-2660RP-11961Call for availability$49.00$49.00 -
![Milwaukee® 49-16-2660NR Non-Retention Nose Piece, for use with M18™ Fuel™ 1/4 in Blind Rivet Tool with 2660-20 One-Key™]()
Milwaukee® 49-16-2660NR Non-Retention Nose Piece, for use with M18™ Fuel™ 1/4 in Blind Rivet Tool with 2660-20 One-Key™ HSI#: 49-16-2660NR-11961Call for availability$49.00$49.00 -
![CP P083071 O-Ring for use with CP7750 Impact Wrench, and CP 0017 SVR, Chipping Hammer]()
CP P083071 O-Ring for use with CP7750 Impact Wrench, and CP 0017 SVR, Chipping Hammer HSI#: PTS39335Call for availability$0.51$0.51 -
![Oztec HR 250 OZ Short Rubber Concrete Vibrator, 2-1/2 in, Vibrates at 12,000 VPM]()
Oztec HR 250 OZ Short Rubber Concrete Vibrator, 2-1/2 in, Vibrates at 12,000 VPM HSI#: CON12605Call for availability$767.92$767.92 -
![DeWALT® DCH832X1 Chipping Hammer Kit, 7 Speed Setting]()
DeWALT® DCH832X1 Chipping Hammer Kit, 7 Speed Setting HSI#: DCH832X1-10254Call for availability$989.00$989.00 -
![Milwaukee® MXF370-2XC MX Vibrator, Power Source: Battery, 2.5 in Head, 21 ft L Shaft]()
Milwaukee® MXF370-2XC MX Vibrator, Power Source: Battery, 2.5 in Head, 21 ft L Shaft HSI#: MXF370-2XC-11961Call for availability$2,199.00$2,199.00 -
![Milwaukee® 2910-21 M18 Fuel™ Cordless Variable Speed Concrete Pencil Vibrator Kit, M18™ Battery Pack, 1.8 hp Power Rating, 18V]()
Milwaukee® 2910-21 M18 Fuel™ Cordless Variable Speed Concrete Pencil Vibrator Kit, M18™ Battery Pack, 1.8 hp Power Rating, 18V HSI#: 2910-21-11961Call for availability$579.00$579.00 -
![Ingersoll Rand® 121-K6 General Duty Round Air Hammer Kit, 3/4 in dia Bore, 3,000 bpm, 2-9/32 in L Stroke, 90 psi Air Flow]()
Ingersoll Rand® 121-K6 General Duty Round Air Hammer Kit, 3/4 in dia Bore, 3,000 bpm, 2-9/32 in L Stroke, 90 psi Air Flow HSI#: 121-K6-11365Call for availability$173.24$173.24 -
![Chicago Pneumatic 6153988230 Throttle Valve Kit]()
Chicago Pneumatic 6153988230 Throttle Valve Kit HSI#: 6153988230-10404Call for availability$32.19$32.19
