Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Power Screwdrivers
-
![Qualtech DEWEZ7 Screw Extractor, #7 Extractor, 17/32 in Drill, For Screw Size: 1 to 1-3/8 in, 4-1/8 in OAL]()
Qualtech DEWEZ7 Screw Extractor, #7 Extractor, 17/32 in Drill, For Screw Size: 1 to 1-3/8 in, 4-1/8 in OAL HSI#: DEWEZ7-10659Call for availability$11.76$11.76 -
![Qualtech DEWEZ8 Screw Extractor, #8 Extractor, 13/16 in Drill, For Screw Size: 1-3/8 to 1-3/4 in, 4-3/8 in OAL]()
Qualtech DEWEZ8 Screw Extractor, #8 Extractor, 13/16 in Drill, For Screw Size: 1-3/8 to 1-3/4 in, 4-3/8 in OAL HSI#: DEWEZ8-10659Call for availability$16.01$16.01 -
![Qualtech DEWEZ9 Screw Extractor, #9 Extractor, 1-1/16 in Drill, For Screw Size: 1-3/4 to 2-1/8 in, 4-5/8 in OAL]()
Qualtech DEWEZ9 Screw Extractor, #9 Extractor, 1-1/16 in Drill, For Screw Size: 1-3/4 to 2-1/8 in, 4-5/8 in OAL HSI#: DEWEZ9-10659Call for availability$27.87$27.87 -
![Qualtool 250R1 Insert Bit, #1 Square Point, 1 in OAL]()
Qualtool 250R1 Insert Bit, #1 Square Point, 1 in OAL HSI#: TAC82445Call for availability$0.96$0.96 -
![Qualtool 60-T20 Insert Bit, #20 Star/Torx® Point, 1 in OAL]()
Qualtool 60-T20 Insert Bit, #20 Star/Torx® Point, 1 in OAL HSI#: TAC83300Call for availability$1.62$1.62 -
![Qualtool 60-T45 Insert Bit, #45 Star/Torx® Point, 1 in OAL]()
Qualtool 60-T45 Insert Bit, #45 Star/Torx® Point, 1 in OAL HSI#: TAC83705Call for availability$1.37$1.37 -
![Qualtool 250SS6 Short Insert Bit, #6 Slotted Point, 1 in OAL]()
Qualtool 250SS6 Short Insert Bit, #6 Slotted Point, 1 in OAL HSI#: TAC82100Call for availability$1.03$1.03 -
![Qualtool 250SS8 Short Insert Bit, #8 Slotted Point, 1 in OAL]()
Qualtool 250SS8 Short Insert Bit, #8 Slotted Point, 1 in OAL HSI#: TAC82200Call for availability$1.22$1.22 -
![Qualtool 30-1P Power Bit, #1 Phillips® Point, 1-15/16 in OAL]()
Qualtool 30-1P Power Bit, #1 Phillips® Point, 1-15/16 in OAL HSI#: TAC81000Call for availability$1.39$1.39 -
![Ridgid® 35560 Screw Extractor, 6 Screw, #6 Extractor, 7/16 in Drill, for Screw Size: 5/8 in, 4-1/8 in OAL, Steel]()
Ridgid® 35560 Screw Extractor, 6 Screw, #6 Extractor, 7/16 in Drill, for Screw Size: 5/8 in, 4-1/8 in OAL, Steel HSI#: 35560-12632Call for availability$22.20$22.20 -
![Simpson Strong-Tie® DWA7G2 Quik Drive® Adapter, For Use with DeWALT® DCF620 Brushless Drywall Screwgun]()
Simpson Strong-Tie® DWA7G2 Quik Drive® Adapter, For Use with DeWALT® DCF620 Brushless Drywall Screwgun HSI#: DWA7G2-12864Call for availability$85.43$85.43 -
![Simpson Strong-Tie® BITKEY Bit Key, For Use with Quik Drive® Tools]()
Simpson Strong-Tie® BITKEY Bit Key, For Use with Quik Drive® Tools HSI#: BITKEY-12864Call for availability$5.67$5.67 -
![Simpson Strong-Tie® PFEEDPAWLTL Quik Drive® Twist Lock Replacement Feed Pawl, For Use with PROHSD, SDS and PRO200 Series Attachment]()
Simpson Strong-Tie® PFEEDPAWLTL Quik Drive® Twist Lock Replacement Feed Pawl, For Use with PROHSD, SDS and PRO200 Series Attachment HSI#: PFEEDPAWLTL-12864Call for availability$18.72$18.72 -
![Simpson Strong-Tie® PMANDREL75-RC Quik Drive® Replacement Mandrel, For Use with QD200SG2, QDPRO250G2, QDPRO300SG2 Attachment, 7-1/2 in L, SDS Attachment]()
Simpson Strong-Tie® PMANDREL75-RC Quik Drive® Replacement Mandrel, For Use with QD200SG2, QDPRO250G2, QDPRO300SG2 Attachment, 7-1/2 in L, SDS Attachment HSI#: PMANDREL75-RC-12864Call for availability$32.29$32.29 -
![Simpson Strong-Tie® BPHXLBBGP14G2 Quik Drive® Replacement Mandrel with 1/4 in Lobular Hex Head Bit]()
Simpson Strong-Tie® BPHXLBBGP14G2 Quik Drive® Replacement Mandrel with 1/4 in Lobular Hex Head Bit HSI#: BPHXLBBGP14G2-12864Call for availability$54.05$54.05 -
![Simpson Strong-Tie® PNOSECLIP Quik Drive® Nose Clip, For Use with 200S, 300S, PRO250 and PRO300 Decking System]()
Simpson Strong-Tie® PNOSECLIP Quik Drive® Nose Clip, For Use with 200S, 300S, PRO250 and PRO300 Decking System HSI#: PNOSECLIP-12864Call for availability$6.80$6.80 -
![Simpson Strong-Tie® NPA2G2 Quik Drive® Twist Lock Nose Piece Assembly, For Use with QD2000SDSF System, 2 in Guide Tube, SDS Attachment]()
Simpson Strong-Tie® NPA2G2 Quik Drive® Twist Lock Nose Piece Assembly, For Use with QD2000SDSF System, 2 in Guide Tube, SDS Attachment HSI#: NPA2G2-12864Call for availability$34.78$34.78 -
![Simpson Strong-Tie® QDPROPHG2 Quik Drive® Quick-Lock Pan Head Attachment, For Use with Quik Drive® G2-Equipped Screwdriver Motor]()
Simpson Strong-Tie® QDPROPHG2 Quik Drive® Quick-Lock Pan Head Attachment, For Use with Quik Drive® G2-Equipped Screwdriver Motor HSI#: QDPROPHG2-12864Call for availability$349.38$349.38 -
![Simpson Strong-Tie® QDPRO300SRFG2 Quik Drive® Roofing Tile Attachment, For Use with PRO300SRF Roofing Tile System]()
Simpson Strong-Tie® QDPRO300SRFG2 Quik Drive® Roofing Tile Attachment, For Use with PRO300SRF Roofing Tile System HSI#: QDPRO300SRFG2-12864Call for availability$302.21$302.21 -
![Simpson Strong-Tie® HT18G2 Quik Drive® Standard Adapter, For Use with Hilti® ST 1800-A18 Cordless and ST 18 Screwguns]()
Simpson Strong-Tie® HT18G2 Quik Drive® Standard Adapter, For Use with Hilti® ST 1800-A18 Cordless and ST 18 Screwguns HSI#: HT18G2-12864Call for availability$32.61$32.61 -
![Simpson Strong-Tie® QDEXTG2-16 Quik Drive® Short Standard Extension, For Use with G2 Series Auto Feed Screw System, 16 in L]()
Simpson Strong-Tie® QDEXTG2-16 Quik Drive® Short Standard Extension, For Use with G2 Series Auto Feed Screw System, 16 in L HSI#: QDEXTG2-16-12864Call for availability$114.28$114.28 -
![Simpson Strong-Tie® QDBSD200G2 Quik Drive® Structural Steel Decking Attachment, For Use with BSD200 Structural Steel Decking System]()
Simpson Strong-Tie® QDBSD200G2 Quik Drive® Structural Steel Decking Attachment, For Use with BSD200 Structural Steel Decking System HSI#: QDBSD200G2-12864Call for availability$724.88$724.88 -
![Simpson Strong-Tie® PRO250G2M25K Quik Drive® PRO250 Subfloor System, 1/4 in Chuck]()
Simpson Strong-Tie® PRO250G2M25K Quik Drive® PRO250 Subfloor System, 1/4 in Chuck HSI#: PRO250G2M25K-12864Call for availability$838.86$838.86 -
![Sioux® SCN7R420 Signature SCN7R Rapid Reverse Serrated Nose Clinch Nut Tool, 1/4-20 Drive, 220 in-lb Torque]()
Sioux® SCN7R420 Signature SCN7R Rapid Reverse Serrated Nose Clinch Nut Tool, 1/4-20 Drive, 220 in-lb Torque HSI#: SCN7R420-12867Call for availability$935.58$935.58 -
![Sioux® SCN7R616 Signature SCN7R Rapid Reverse Serrated Nose Clinch Nut Tool, 3/8-16 Drive, 220 in-lb Torque]()
Sioux® SCN7R616 Signature SCN7R Rapid Reverse Serrated Nose Clinch Nut Tool, 3/8-16 Drive, 220 in-lb Torque HSI#: SCN7R616-12867Call for availability$935.58$935.58 -
![Sioux® SCN7R518 Signature Rapid Reverse Serrated Nose Clinch Nut Tool, 5/16-18 Drive, 220 in-lb Torque]()
Sioux® SCN7R518 Signature Rapid Reverse Serrated Nose Clinch Nut Tool, 5/16-18 Drive, 220 in-lb Torque HSI#: SCN7R518-12867Call for availability$935.58$935.58 -
![Sioux® SSD10P20P Pneumatic Screwdriver, 1/4 in Chuck, 7.9 N-m Torque, 30 CFM Air Flow, 90 psi, Medium Torque/Positive Clutch]()
Sioux® SSD10P20P Pneumatic Screwdriver, 1/4 in Chuck, 7.9 N-m Torque, 30 CFM Air Flow, 90 psi, Medium Torque/Positive Clutch HSI#: SSD10P20P-12867Call for availability$473.40$473.40 -
![Sioux® SSD10P25P Pneumatic Screwdriver, 1/4 in Chuck, 5.7 N-m Torque, 30 CFM Air Flow, 90 psi, Medium Torque/Positive Clutch]()
Sioux® SSD10P25P Pneumatic Screwdriver, 1/4 in Chuck, 5.7 N-m Torque, 30 CFM Air Flow, 90 psi, Medium Torque/Positive Clutch HSI#: SSD10P25P-12867Call for availability$473.40$473.40 -
![Sioux® 1ST2108Q Inline Reversible Shutoff Pneumatic Torque Control Screwdriver, 1/4 in Chuck, 0.6 to 5.5 Nm Torque, 8 CFM Air Flow]()
Sioux® 1ST2108Q Inline Reversible Shutoff Pneumatic Torque Control Screwdriver, 1/4 in Chuck, 0.6 to 5.5 Nm Torque, 8 CFM Air Flow HSI#: 1ST2108Q-12867Call for availability$1,014.31$1,014.31 -
![Sioux® SSD10S25AC Inline Reversible Pneumatic Screwdriver, 1/4 in Chuck, 6.8 N-m Torque, 30 CFM Air Flow, 90 psi]()
Sioux® SSD10S25AC Inline Reversible Pneumatic Screwdriver, 1/4 in Chuck, 6.8 N-m Torque, 30 CFM Air Flow, 90 psi HSI#: SSD10S25AC-12867Call for availability$922.73$922.73 -
![Sioux® SSD10P20SRR Rapid Reverse Pneumatic Screwdriver, 1/4 in Chuck, 9 N-m Torque, 30 CFM Air Flow, 90 psi]()
Sioux® SSD10P20SRR Rapid Reverse Pneumatic Screwdriver, 1/4 in Chuck, 9 N-m Torque, 30 CFM Air Flow, 90 psi HSI#: SSD10P20SRR-12867Call for availability$436.32$436.32 -
![Sioux® SSD6P20P Reversible Pneumatic Screwdriver, 1/4 in Chuck, 6.2 Nm Torque, 25 CFM Air Flow, 90 psi]()
Sioux® SSD6P20P Reversible Pneumatic Screwdriver, 1/4 in Chuck, 6.2 Nm Torque, 25 CFM Air Flow, 90 psi HSI#: SSD6P20P-12867Call for availability$444.09$444.09 -
![Sioux® 1ST2208Q Inline Reversible Torque Control Screwdriver, 1/4 in Chuck, 5 to 35 in-lb Torque, 8 CFM Air Flow]()
Sioux® 1ST2208Q Inline Reversible Torque Control Screwdriver, 1/4 in Chuck, 5 to 35 in-lb Torque, 8 CFM Air Flow HSI#: 1ST2208Q-12867Call for availability$1,014.31$1,014.31 -
![Weller® Xcelite® 99PAN Power Bit Adapter, Series: Series 99®, 1/4 in Point, Allen® Hex Point, 1-3/4 in OAL, Steel]()
Weller® Xcelite® 99PAN Power Bit Adapter, Series: Series 99®, 1/4 in Point, Allen® Hex Point, 1-3/4 in OAL, Steel HSI#: 99PAN-10143Call for availability$20.47$20.47 -
![Greenlee® 60117 Draw Stud, Replacement, 1/2 in dia x 4-5/8 in L, Hydraulic/Manual Use With Battery/Hydraulic Drivers and Special Shape]()
Greenlee® 60117 Draw Stud, Replacement, 1/2 in dia x 4-5/8 in L, Hydraulic/Manual Use With Battery/Hydraulic Drivers and Special Shape HSI#: 60117-11113Call for availability$106.55$106.55 -
![Simpson Strong-Tie® SC62-5/97-KT25 Slide Clip 2 x 6 x 5 12Ga with Screws, 25 pk]()
Simpson Strong-Tie® SC62-5/97-KT25 Slide Clip 2 x 6 x 5 12Ga with Screws, 25 pk HSI#: SC62-5/97-KT25-12864Call for availability$277.18$277.18 -
![Simpson Strong-Tie® WASHER1/2-HDG USS Washer HD galvanized, 1/2 in, ASTM F844]()
Simpson Strong-Tie® WASHER1/2-HDG USS Washer HD galvanized, 1/2 in, ASTM F844 HSI#: WASHER1/2-HDG-12864Call for availability$0.56$0.56 -
![Simpson Strong-Tie® BP 3/4-3HDG 3/4 in Bolt dia 3 x 3 Bearing Plate HDG]()
Simpson Strong-Tie® BP 3/4-3HDG 3/4 in Bolt dia 3 x 3 Bearing Plate HDG HSI#: BP 3/4-3HDG-12864Call for availability$6.75$6.75 -
![Sioux® 2259 Needle, For Use with SDG03, SDG05S and SXG05S Air Die Grinder, 5 in L]()
Sioux® 2259 Needle, For Use with SDG03, SDG05S and SXG05S Air Die Grinder, 5 in L HSI#: 2259-12867Call for availability$23.21$23.21 -
![Sioux® Force® 5272A Short Short Air Hammer, 0.8 in dia Bore, 4,800 BPM, 1.6 in L Stroke, 90 psi, Tool Only]()
Sioux® Force® 5272A Short Short Air Hammer, 0.8 in dia Bore, 4,800 BPM, 1.6 in L Stroke, 90 psi, Tool Only HSI#: 5272A-12867Call for availability$90.64$90.64
