Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Holemaking & Fastening Power Tools
-
![Sioux® IW500MP-4R Impact Wrench, Bare Tool, Square Drive, 1/2 in Drive, 1,200 BPM, 780 ft-lb, 9,400 RPM, 4 CFM, 90 psi Air]()
Sioux® IW500MP-4R Impact Wrench, Bare Tool, Square Drive, 1/2 in Drive, 1,200 BPM, 780 ft-lb, 9,400 RPM, 4 CFM, 90 psi Air HSI#: IW500MP-4R-12867Call for availability$443.12$443.12 -
![Sioux® 5007 Force® Ratchet Wrench, 3/8 in Drive, 20 ft-lb Torque, 265 RPM Speed, 1.4 to 5.2 CFM Air Flow, 90 psi]()
Sioux® 5007 Force® Ratchet Wrench, 3/8 in Drive, 20 ft-lb Torque, 265 RPM Speed, 1.4 to 5.2 CFM Air Flow, 90 psi HSI#: 5007-12867Call for availability$236.03$236.03 -
![Sioux® Force® 5075C Twin Hammer Impact Wrench, 3/4 in Drive, 1,100 ft-lb Torque, 7.3 CFM Air Flow, 8.9 in OAL]()
Sioux® Force® 5075C Twin Hammer Impact Wrench, 3/4 in Drive, 1,100 ft-lb Torque, 7.3 CFM Air Flow, 8.9 in OAL HSI#: 5075C-12867Call for availability$740.97$740.97 -
![Sioux® Force® 5093CL Pin Clutch Impact Wrench, 1 in Drive, 1,950 ft-lb Torque, 11 CFM Air Flow, 19.8 in OAL]()
Sioux® Force® 5093CL Pin Clutch Impact Wrench, 1 in Drive, 1,950 ft-lb Torque, 11 CFM Air Flow, 19.8 in OAL HSI#: 5093CL-12867Call for availability$1,375.72$1,375.72 -
![Sioux® Force® 5093C Pin Clutch Impact Wrench, 1 in Drive, 1,950 ft-lb Torque, 11 CFM Air Flow, 13-1/2 in OAL]()
Sioux® Force® 5093C Pin Clutch Impact Wrench, 1 in Drive, 1,950 ft-lb Torque, 11 CFM Air Flow, 13-1/2 in OAL HSI#: 5093C-12867Call for availability$1,300.20$1,300.20 -
![Sioux® 5045 Force® Butterfly Heavy Duty Impact Wrench, 3/8 in Drive, 175 ft-lb Torque, 2.5 CFM Air Flow, 7.6 in OAL]()
Sioux® 5045 Force® Butterfly Heavy Duty Impact Wrench, 3/8 in Drive, 175 ft-lb Torque, 2.5 CFM Air Flow, 7.6 in OAL HSI#: 5045-12867Call for availability$333.27$333.27 -
![Sioux® 5045P Force® Butterfly Heavy Duty Impact Wrench, 3/8 in Drive, 175 ft-lb Torque, 2.5 CFM Air Flow, 7.6 in OAL]()
Sioux® 5045P Force® Butterfly Heavy Duty Impact Wrench, 3/8 in Drive, 175 ft-lb Torque, 2.5 CFM Air Flow, 7.6 in OAL HSI#: 5045P-12867Call for availability$337.72$337.72 -
![Sioux® SDR4P36N2 Signature SDR4P Compact Pistol Drill, 1/4 in Keyed Chuck, 0.4 hp, 6.3 in OAL, 20 CFM Short Run Air Consumption]()
Sioux® SDR4P36N2 Signature SDR4P Compact Pistol Drill, 1/4 in Keyed Chuck, 0.4 hp, 6.3 in OAL, 20 CFM Short Run Air Consumption HSI#: SDR4P36N2-12867Call for availability$341.95$341.95 -
![Sioux® SDR4P30N2 Signature SDR4P Compact Pistol Drill, 1/4 in Keyed Chuck, 0.4 hp, 6.3 in OAL, 20 CFM Short Run Air Consumption]()
Sioux® SDR4P30N2 Signature SDR4P Compact Pistol Drill, 1/4 in Keyed Chuck, 0.4 hp, 6.3 in OAL, 20 CFM Short Run Air Consumption HSI#: SDR4P30N2-12867Call for availability$341.95$341.95 -
![Sioux® SDR4P26N2 Signature SDR4P Compact Pistol Drill, 1/4 in Keyed Chuck, 0.4 hp, 6.3 in OAL, 20 CFM Short Run Air Consumption]()
Sioux® SDR4P26N2 Signature SDR4P Compact Pistol Drill, 1/4 in Keyed Chuck, 0.4 hp, 6.3 in OAL, 20 CFM Short Run Air Consumption HSI#: SDR4P26N2-12867Call for availability$341.95$341.95 -
![Sioux® SCN7R518 Signature Rapid Reverse Serrated Nose Clinch Nut Tool, 5/16-18 Drive, 220 in-lb Torque]()
Sioux® SCN7R518 Signature Rapid Reverse Serrated Nose Clinch Nut Tool, 5/16-18 Drive, 220 in-lb Torque HSI#: SCN7R518-12867Call for availability$935.58$935.58 -
![Sioux® SCN7R616 Signature SCN7R Rapid Reverse Serrated Nose Clinch Nut Tool, 3/8-16 Drive, 220 in-lb Torque]()
Sioux® SCN7R616 Signature SCN7R Rapid Reverse Serrated Nose Clinch Nut Tool, 3/8-16 Drive, 220 in-lb Torque HSI#: SCN7R616-12867Call for availability$935.58$935.58 -
![Sioux® SCN7R420 Signature SCN7R Rapid Reverse Serrated Nose Clinch Nut Tool, 1/4-20 Drive, 220 in-lb Torque]()
Sioux® SCN7R420 Signature SCN7R Rapid Reverse Serrated Nose Clinch Nut Tool, 1/4-20 Drive, 220 in-lb Torque HSI#: SCN7R420-12867Call for availability$935.58$935.58 -
![Simpson Strong-Tie® QDBSD200G2 Quik Drive® Structural Steel Decking Attachment, For Use with BSD200 Structural Steel Decking System]()
Simpson Strong-Tie® QDBSD200G2 Quik Drive® Structural Steel Decking Attachment, For Use with BSD200 Structural Steel Decking System HSI#: QDBSD200G2-12864Call for availability$775.62$775.62 -
![Simpson Strong-Tie® QDEXTG2-16 Quik Drive® Short Standard Extension, For Use with G2 Series Auto Feed Screw System, 16 in L]()
Simpson Strong-Tie® QDEXTG2-16 Quik Drive® Short Standard Extension, For Use with G2 Series Auto Feed Screw System, 16 in L HSI#: QDEXTG2-16-12864Call for availability$122.27$122.27 -
![Simpson Strong-Tie® HT18G2 Quik Drive® Standard Adapter, For Use with Hilti® ST 1800-A18 Cordless and ST 18 Screwguns]()
Simpson Strong-Tie® HT18G2 Quik Drive® Standard Adapter, For Use with Hilti® ST 1800-A18 Cordless and ST 18 Screwguns HSI#: HT18G2-12864Call for availability$34.88$34.88 -
![Simpson Strong-Tie® QDPRO300SRFG2 Quik Drive® Roofing Tile Attachment, For Use with PRO300SRF Roofing Tile System]()
Simpson Strong-Tie® QDPRO300SRFG2 Quik Drive® Roofing Tile Attachment, For Use with PRO300SRF Roofing Tile System HSI#: QDPRO300SRFG2-12864Call for availability$323.35$323.35 -
![Simpson Strong-Tie® QDPROPHG2 Quik Drive® Quick-Lock Pan Head Attachment, For Use with Quik Drive® G2-Equipped Screwdriver Motor]()
Simpson Strong-Tie® QDPROPHG2 Quik Drive® Quick-Lock Pan Head Attachment, For Use with Quik Drive® G2-Equipped Screwdriver Motor HSI#: QDPROPHG2-12864Call for availability$373.85$373.85 -
![Simpson Strong-Tie® NPA2G2 Quik Drive® Twist Lock Nose Piece Assembly, For Use with QD2000SDSF System, 2 in Guide Tube, SDS Attachment]()
Simpson Strong-Tie® NPA2G2 Quik Drive® Twist Lock Nose Piece Assembly, For Use with QD2000SDSF System, 2 in Guide Tube, SDS Attachment HSI#: NPA2G2-12864Call for availability$37.23$37.23 -
![Simpson Strong-Tie® PNOSECLIP Quik Drive® Nose Clip, For Use with 200S, 300S, PRO250 and PRO300 Decking System]()
Simpson Strong-Tie® PNOSECLIP Quik Drive® Nose Clip, For Use with 200S, 300S, PRO250 and PRO300 Decking System HSI#: PNOSECLIP-12864Call for availability$7.26$7.26 -
![Simpson Strong-Tie® BPHXLBBGP14G2 Quik Drive® Replacement Mandrel with 1/4 in Lobular Hex Head Bit]()
Simpson Strong-Tie® BPHXLBBGP14G2 Quik Drive® Replacement Mandrel with 1/4 in Lobular Hex Head Bit HSI#: BPHXLBBGP14G2-12864Call for availability$57.84$57.84 -
![Simpson Strong-Tie® PMANDREL75-RC Quik Drive® Replacement Mandrel, For Use with QD200SG2, QDPRO250G2, QDPRO300SG2 Attachment, 7-1/2 in L, SDS Attachment]()
Simpson Strong-Tie® PMANDREL75-RC Quik Drive® Replacement Mandrel, For Use with QD200SG2, QDPRO250G2, QDPRO300SG2 Attachment, 7-1/2 in L, SDS Attachment HSI#: PMANDREL75-RC-12864Call for availability$34.54$34.54 -
![Simpson Strong-Tie® GFC34-RC2 Fuel Cell, For Use with GCN-MEP, GCN-MEPMAG, TrakFast® TF1100 and Trak-It® C3 Tools, 2 pc]()
Simpson Strong-Tie® GFC34-RC2 Fuel Cell, For Use with GCN-MEP, GCN-MEPMAG, TrakFast® TF1100 and Trak-It® C3 Tools, 2 pc HSI#: GFC34-RC2-12864Call for availability$55.24$55.24 -
![Simpson Strong-Tie® PFEEDPAWLTL Quik Drive® Twist Lock Replacement Feed Pawl, For Use with PROHSD, SDS and PRO200 Series Attachment]()
Simpson Strong-Tie® PFEEDPAWLTL Quik Drive® Twist Lock Replacement Feed Pawl, For Use with PROHSD, SDS and PRO200 Series Attachment HSI#: PFEEDPAWLTL-12864Call for availability$20.04$20.04 -
![Simpson Strong-Tie® BITKEY Bit Key, For Use with Quik Drive® Tools]()
Simpson Strong-Tie® BITKEY Bit Key, For Use with Quik Drive® Tools HSI#: BITKEY-12864Call for availability$6.06$6.06 -
![Simpson Strong-Tie® DWA7G2 Quik Drive® Adapter, For Use with DeWALT® DCF620 Brushless Drywall Screwgun]()
Simpson Strong-Tie® DWA7G2 Quik Drive® Adapter, For Use with DeWALT® DCF620 Brushless Drywall Screwgun HSI#: DWA7G2-12864Call for availability$91.42$91.42 -
![Dremel HA1031 Rotary Hammer Adapter, For Converting SDS-Max to Spline]()
Dremel HA1031 Rotary Hammer Adapter, For Converting SDS-Max to Spline HSI#: TCU38007Call for availability$202.99$202.99 -
![Ridgid® 35560 Screw Extractor, 6 Screw, #6 Extractor, 7/16 in Drill, for Screw Size: 5/8 in, 4-1/8 in OAL, Steel]()
Ridgid® 35560 Screw Extractor, 6 Screw, #6 Extractor, 7/16 in Drill, for Screw Size: 5/8 in, 4-1/8 in OAL, Steel HSI#: 35560-12632Call for availability$22.20$22.20 -
![Qualtool 30-1P Power Bit, #1 Phillips® Point, 1-15/16 in OAL]()
Qualtool 30-1P Power Bit, #1 Phillips® Point, 1-15/16 in OAL HSI#: TAC81000Call for availability$1.39$1.39 -
![Qualtool 250SS8 Short Insert Bit, #8 Slotted Point, 1 in OAL]()
Qualtool 250SS8 Short Insert Bit, #8 Slotted Point, 1 in OAL HSI#: TAC82200Call for availability$1.22$1.22 -
![Qualtool 250SS6 Short Insert Bit, #6 Slotted Point, 1 in OAL]()
Qualtool 250SS6 Short Insert Bit, #6 Slotted Point, 1 in OAL HSI#: TAC82100Call for availability$1.03$1.03 -
![Qualtool 60-T45 Insert Bit, #45 Star/Torx® Point, 1 in OAL]()
Qualtool 60-T45 Insert Bit, #45 Star/Torx® Point, 1 in OAL HSI#: TAC83705Call for availability$1.37$1.37 -
![Qualtool 250R1 Insert Bit, #1 Square Point, 1 in OAL]()
Qualtool 250R1 Insert Bit, #1 Square Point, 1 in OAL HSI#: TAC82445Call for availability$0.96$0.96 -
![Qualtech DEWEZ9 Screw Extractor, #9 Extractor, 1-1/16 in Drill, For Screw Size: 1-3/4 to 2-1/8 in, 4-5/8 in OAL]()
Qualtech DEWEZ9 Screw Extractor, #9 Extractor, 1-1/16 in Drill, For Screw Size: 1-3/4 to 2-1/8 in, 4-5/8 in OAL HSI#: DEWEZ9-10659Call for availability$27.87$27.87 -
![Qualtech DEWEZ8 Screw Extractor, #8 Extractor, 13/16 in Drill, For Screw Size: 1-3/8 to 1-3/4 in, 4-3/8 in OAL]()
Qualtech DEWEZ8 Screw Extractor, #8 Extractor, 13/16 in Drill, For Screw Size: 1-3/8 to 1-3/4 in, 4-3/8 in OAL HSI#: DEWEZ8-10659Call for availability$16.01$16.01 -
![Qualtech DEWEZ7 Screw Extractor, #7 Extractor, 17/32 in Drill, For Screw Size: 1 to 1-3/8 in, 4-1/8 in OAL]()
Qualtech DEWEZ7 Screw Extractor, #7 Extractor, 17/32 in Drill, For Screw Size: 1 to 1-3/8 in, 4-1/8 in OAL HSI#: DEWEZ7-10659Call for availability$11.76$11.76 -
![Qualtech DEWEZ12 Screw Extractor, #12 Extractor, 1-15/16 in Drill, For Screw Size: 3 to 3-1/2 in, 6-1/4 in OAL]()
Qualtech DEWEZ12 Screw Extractor, #12 Extractor, 1-15/16 in Drill, For Screw Size: 3 to 3-1/2 in, 6-1/4 in OAL HSI#: DEWEZ12-10659Call for availability$101.79$101.79 -
![Qualtech DEWEZ11 Screw Extractor, #11 Extractor, 1-17/32 in Drill, For Screw Size: 2-1/2 to 3 in, 5-5/8 in OAL]()
Qualtech DEWEZ11 Screw Extractor, #11 Extractor, 1-17/32 in Drill, For Screw Size: 2-1/2 to 3 in, 5-5/8 in OAL HSI#: DEWEZ11-10659Call for availability$62.97$62.97 -
![Palmgren® 9680505 Torque Drive Tap Holder with Clutch, 5/16 in Tap, SZ 1]()
Palmgren® 9680505 Torque Drive Tap Holder with Clutch, 5/16 in Tap, SZ 1 HSI#: 9680505-10340Call for availability$156.63$156.63 -
![Milwaukee® 02-80-3256 Thrust Bearing, For Use with 9070-20 Serial 229B 1/2 in D.I. Impact Wrench, 7/16 in Variable Speed Hex D.I. Impact Wrench]()
Milwaukee® 02-80-3256 Thrust Bearing, For Use with 9070-20 Serial 229B 1/2 in D.I. Impact Wrench, 7/16 in Variable Speed Hex D.I. Impact Wrench HSI#: 02-80-3256-11961Call for availability$3.41$3.41
