Holemaking & Fastening Power Tools
- Milwaukee® 49-16-2960 M18 Fuel™ Protective Boot, For Use with M18 Fuel™ 2960/2962/2962P Mid-Torque Impact Wrench HSI#: 49-16-2960-11961Call for availability$45.00$45.00
- Milwaukee® 2977-22O M18™ Force Logic™ Cordless Utility Crimper Kit, 750 kcmil Copper, 1000 kcmil Aluminum, 477 ACSR, 1/2 in EHS Guy Wire HSI#: 2977-22O-11961Call for availability$2,455.34$2,455.34
- Milwaukee® M12 Fuel™ 2564-22 Cordless Impact Wrench with Friction Ring, 3/8 in Right Angle Drive, 220 ft-lb Torque, 12 V, 14.17 in OAL HSI#: 2564-22-11961Call for availability$399.00$399.00
- Milwaukee® 49-16-2962 M18 Fuel™ Lanyard Loop, For Use with M18 Fuel™ 2960/2962/2962P Mid-Torque Impact Wrench HSI#: 49-16-2962-11961Call for availability$37.28$37.28
- Milwaukee® 2566-22 M12 Fuel™ High-Speed Cordless Ratchet Kit, 1/4 in Drive, 0 to 35 ft-lb Torque, 0 to 450 rpm Speed, 12 V HSI#: 2566-22-11961Call for availability$299.00$299.00
- Milwaukee® 49-16-2771 Flexible Impeller Kit with Grease HSI#: PTS13240Call for availability$38.71$38.71
- Milwaukee® 22-20-0080 Brush Holder Assembly HSI#: 22-20-0080-11961Call for availability$1.70$1.70
- Milwaukee® 16-07-0041 Motor Rotor Assembly HSI#: 16-07-0041-11961Call for availability$31.95$31.95
- Milwaukee® 16-01-3091 Armature Assembly with 16013090 HSI#: 16-01-3091-11961Call for availability$49.64$49.64
- Milwaukee® 14-46-2429 Blade Cover Assembly HSI#: 14-46-2429-11961Call for availability$0.00$12.98
- Milwaukee® 14-20-0020 Controller Service Assembly HSI#: 14-20-0020-11961Call for availability$236.70$236.70
- Milwaukee® 49-16-2704 Rapid Reset Draw Stud Set, For Use with Exact™ 2-1/2 to 4 in Punches, Dies and Milwaukee® Quick Connect System HSI#: 49-16-2704-11961Call for availability$89.00$89.00
- Milwaukee® 43-12-0055 Handle Square Driver HSI#: 43-12-0055-11961Call for availability$0.00$9.98
- Milwaukee® MXF301-2CP MX™ Fuel™ Cordless Handheld Core Drill, 1-1/4 in Chuck, 0 to 800/0 to 1600 rpm No-Load, 21.58 in OAL, Lithium-Ion Battery HSI#: MXF301-2CP-11961Call for availability$3,799.00$3,799.00
- Milwaukee® M12 Fuel™ 2564-20 Cordless Impact Wrench, 3/8 in Right Angle Drive, 220 ft-lb Torque, 12 V, 13.28 in OAL HSI#: 2564-20-11961Call for availability$249.00$249.00
- Milwaukee® 49-16-11D3, M18 6T Snub Nose Crimping Jaw HSI#: 49-16-11D3-11961Call for availability$649.00$649.00
- Milwaukee® 2978-22 M18™ Force Logic™ Cordless Linear Utility Crimper Kit, 8 AWG to 600 kcmil Crimping, 6 ton Crimping, 18 V, M18™ Redlithium™ Battery HSI#: 2978-22-11961Call for availability$2,799.00$2,799.00
- Milwaukee® 2660-22 M18 FUEL™ Blind Rivet Tool Kit, 1/4 in Rivet, 4500 lb Pulling, M18™ Redlithium™ CP2.0 Battery HSI#: 2660-22CT-11961Call for availability$1,299.00$1,299.00
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrowâ„¢ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade



















