HSI® Three Leg Nylon Bridle Slings | Oblong Link to Eye Ends | Heavy Duty Nylon Webbing
Dixon® Cc1425 Coil-Chief Self-Storing Air Hose, 1/4 In, MNPT, 25 Ft L, 185 Psi, Nylon, Domestic
Klein® Et250 Digital Voltage Continuity Tester, 2 To 600 Vac/Vdc, Digital LCD Display
TPI 198Tmc 1-Phase Radiant/Fan Forced Standard Portable Electric Heater, 5120 Btu, 120 Vac, 12.5/7.5/5 A, 50/60 Hz, 1500/900/600 W
First Aid Only® 24-102 Eyewash Station, 16 oz
Moldex® 6900 Pura-Fit® Corded Single Use Disposable Ear Plug, Universal, 33 Db, Tapered, Green
Stanley® Super Wonder Bar® 55-525 Pry Bar, Beveled/Flat Tip, 15 In OAL, Forged High Carbon Steel
Louisville® Fs1506 Standard Step Ladder, 6 Ft Ladder, 300 Lb Load, Ia, Fiberglass, 5 Steps
Gorilla® 6035120 Rugged Tough Duct Tape, 2 In W X 35 Yd L
Ipg® 83689 Utility Grade Duct Tape, 48 mm W X 54.8 M L, 0.2 mm Thk
Krylon® Quik-Mark™ A03610 Water Base Inverted Marking Paint, 20 oz, Liquid, Fluorescent Safety Red, 332 Linear Ft
Weiler® 75104 Cut End Wet Mop Head
Primesource® 8Ctdskr Sinker Nail, 17/64 In, 2-3/8 In L, Smooth Shank, 9 Ga, Vinyl Coated
Norgren® By Dixon® F74G-4M-Mb Excelon® General Purpose Standard Compressed Air Filter With 1/4 Turn Manual Drain, Without Service Life Indicator, 1/2 In Ptf Port, 250 Psig Pressure Range, 140 SCFM Flow Rate, 40 Micron, -30 To 175 Deg F, Zinc Bowl
Buffers & Grinders
-
Milwaukee® 48-03-3551 SDS Plus, 12 In L X 3-3/16 In D, 1-1/4 In Shank, For Use With 1 To 1-1/2 In Core Bits
HSI#: 48-03-3551-11961$51.66 -
Milwaukee® 48-03-3574, 12 In L Shank, For Use With 5 To 6 In SDS-Max Thin Wall Core Bit
HSI#: 48-03-3574-11961$79.20 -
Milwaukee® 48-03-3555 Sds Plus, 8 In L X 2-13/16 In D, 2 In Shank, For Use With 1-3/4 To 4 In Thin Wall Core Bits
HSI#: 48-03-3555-11961$51.66 -
Milwaukee® 48-03-3630 Hex, 3/8 To 1/4 In Shank, For Use With Milwaukee Cordless And Corded Drills
HSI#: 48-03-3630-11961$33.79 -
Milwaukee® 48-03-3540, 12 In L Shank, For Use With Spline Thin Wall 1-3/4-6 Core Bit
HSI#: 48-03-3540-11961$51.66 -
Jet® 716300 Drill Press, 0.75 Hp, 115 Vac, 5/8 In Chuck, 16-7/8 In Swing, 14 In L X 19 In W Table
HSI#: 716300-13455$1152.18 -
-
Jet® Jdp-20Mf, 1.5 Hp, 115/230 Vac, 3/4 In Chuck, 20 In Swing, 18-1/2 In L X 16 In W Table
HSI#: TEL80017$1385.29
