Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Chicago Hardware 08482 6 Shoulder Pattern Eye Bolt, 5/8 in, 4-1/2 in L Shank, Drop Forged Steel, Hot Dipped Galvanized
Manufacturer #08482 6
Call for availability
$20.05
$20.05
Quantity Break Pricing may apply in the cart
HSI
FIT43290
UPC #:098441084826
Chicago Hardware 08482 6 Shoulder Pattern Eye Bolt, 5/8 in, 4-1/2 in L Shank, Drop Forged Steel, Hot Dipped Galvanized is available to buy in increments of 1
Product Overview
Chicago Hardware Eye Bolt, Shoulder Pattern, Imperial, 5/8 in, 4-1/2 in Shank Length, Drop Forged Steel, Hot Dipped Galvanized, 1-1/4 in Inside Eye dia, 2-5/16 in Outside Eye dia, UNC, 7-1/4 in Overall Length, Working Load: 3500 lb, 2 in Thread Length.
Features
- Machine thread eye bolts are threaded national course before galvanizing and assembled with hex nuts tapped oversize
- Loads are based on a safety factor of 5 to 1
- When tested all eye bolts are pulled at a uniform rate of speed in a direct tension
- 1-1/8 in outside shoulder
- 13/64 in Thick at shoulder
Specifications
| Manufacturer Part Number | 08482 6 |
|---|---|
| Manufacturer | Chicago Hardware & Fixture |
| Brands | CHICAGO HARDWARE |
| UPC | 098441084826 |
| Length (in) | 7.25 |
| Standard Approvals |
|
| Measurement System | Imperial |
| Working Load Limit (lb) | 3,500 |
| Type | Shoulder Pattern |
| Thread Size | 5/8 in |
| Thread Type | Machine/UNC |
| Shank Length | 4-1/2 in |
| Eye Inside Diameter (in) | 1-1/4 in |
| Material | Drop Forged Steel |
| Thread Length | 2 in |
| Eye Outside Diameter (in) | 2-5/16 |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review