Reelcraft® TH5400 OMP TH5000 Corrosion-Resistant Hose Reel, 1/4 in ID x 0.53 in OD x 25 ft L Hose, 3000 psi Pressure, Domestic
Manufacturer #TH5400 OMP
Call for availability
$716.10
$716.10
Quantity Break Pricing may apply in the cart
HSI
TH5400 OMP-12581
UPC #:699567003496
Reelcraft® TH5400 OMP TH5000 Corrosion-Resistant Hose Reel, 1/4 in ID x 0.53 in OD x 25 ft L Hose, 3000 psi Pressure, Domestic is available to buy in increments of 1
Product Overview
Reelcraft® Hose Reel, Corrosion-Resistant, Series: TH5000, 1/4 in ID x 0.53 in OD x 25 ft L Hose, 3000 psi, Spring Drive, Bench/Ceiling/Floor/Wall Mount, Steel Swivel, Buna-N Seal, 13-1/2 in L x 6 in W x 14-1/2 in H, Steel, Powder Coated, Red, Domestic
Features
- Quality finish and corrosion-resistant - individually powder coated components offer the maximum protection from premature corrosion
- Long life drive spring - declutching arbor virtually eliminates possibility of spring damage due to reverse winding
- Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life
- 1/4 in female NPTF inlet
- 1/4 in female NPSM
- 210° F maximum temperature rating
- Without hose
Specifications
| Manufacturer Part Number | TH5400 OMP |
|---|---|
| Manufacturer | Reelcraft Industries, Inc |
| Brands | REELCRAFT |
| UPC | 699567003496 |
| Length (in) | 15 |
| Width (in) | 6.63 |
| Height (in) | 17 |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade