Heaters
- TPI CES24 CES Heavy Duty Standard Exhaust Shutter, For Use with 24 in Belt Drive Exhaust Fan, 24 x 24 in Inside Frame, 27 in Outside Frame, Aluminum HSI#: CES24-13251Call for availability$434.00$434.00
- TPI LRD100A LR Series Line Voltage Non-Programmable Thermostat, Heat/Cool Thermostat, 0 to 110°F Control, SPDT Switch, Import HSI#: LRD100A-13251Call for availability$44.00$44.00
- TPI CV100X CVX 1-Phase Standard Electric Radiant Cove Heater, 3413 Btu/hr Capacity, 240 VAC, 1000 W HSI#: CV100X-13251Call for availability$618.00$618.00
- TPI CV12512X CVX 1-Phase Standard Electric Radiant Cove Heater, 4266 Btu/hr Capacity, 120 VAC, 1250 W HSI#: CV12512X-13251Call for availability$758.00$758.00
- TPI CV75YX CVX 1-Phase Standard Electric Radiant Cove Heater, 2560 Btu/hr Capacity, 208 VAC, 750 W HSI#: CV75YX-13251Call for availability$524.00$524.00
- TPI CV90X CVX 1-Phase Standard Electric Radiant Cove Heater, 3072 Btu/hr Capacity, 240 VAC, 900 W HSI#: CV90X-13251Call for availability$591.00$591.00
- TPI CV110X CVX 1-Phase Standard Electric Radiant Cove Heater, 3754 Btu/hr Capacity, 240 VAC, 1100 W HSI#: CV110X-13251Call for availability$873.16$873.16
- TPI CV45X CVX 1-Phase Standard Electric Radiant Cove Heater, 1536 Btu/hr Capacity, 240 VAC, 450 W HSI#: CV45X-13251Call for availability$384.00$384.00
- TPI CV7512X CVX 1-Phase Standard Electric Radiant Cove Heater, 2560 Btu/hr Capacity, 120 VAC, 750 W HSI#: CV7512X-13251Call for availability$524.00$524.00
- TPI ICH240C 1-Phase Fan Forced Portable Electric Heater, 13648 Btu/hr Capacity, 208/240 VAC, 4/3 kW HSI#: ICH240-HKMCall for availability$466.00$466.00
- TPI HF684TC 680 1-Phase Bulldog Fan Forced Portable Unit Heater, 13652/10239 Btu/hr Capacity, 208/240 VAC, 4/3 kW HSI#: HF684T2M-HKMCall for availability$731.00$731.00
- TPI HF685TC 680 1-Phase Bulldog Fan Forced Portable Unit Heater, 16384/12288 Btu/hr Capacity, 208/240 VAC, 4.8/3.6 kW HSI#: HF685TC-13251Call for availability$768.00$768.00
- TPI A5120 Mounting Bracket, Steel, For Use With: 5100 Series 3.3 to 5 kW Fan Forced Unit Heater, Powder Coated, 21 in L x 17 in W x 6 in H HSI#: A5120-13251Call for availability$224.00$224.00
- TPI DCS803 Field Installed Disconnect Kit, For Use With: UH Series Horizontal Fan Forced Unit Heater, 80 A Current HSI#: DCS803-13251Call for availability$517.00$517.00
- TPI A5105 Mounting Bracket, Steel, For Use With: 5100 Series 3.3 to 5 kW Fan Forced Unit Heater, Powder Coated, 21 in L x 17 in W x 6 in H HSI#: A5105-13251Call for availability$195.00$195.00
- TPI CSW Corner Section For Baseboard White, For Use With: 2900C Series Electric Baseboard Heavy Duty Commercial Convection Heater HSI#: CSW-13251Call for availability$64.00$64.00
- TPI Receptacle Section, For Use With: 2900C Series Electric Baseboard Heavy Duty Commercial Convection Heater HSI#: BDR115W-13251Call for availability$46.00$46.00
- TPI Transfer Switch, For Use With: 2900C Series Electric Baseboard Heavy Duty Commercial Convection Heater, 240 VAC, 16 A, White, Domestic HSI#: SR220W-13251Call for availability$310.00$310.00
- TPI TSH20JW 1-Phase Fan Forced Kickspace Specialty Heater, 5120/3412, 5120/2560, 6284/3412 Btu/hr, 120/208/240 VAC/AC, 1000/1500/750/1500/1000/2000 W HSI#: TSH20JW-13251Call for availability$618.00$618.00
- TPI MFHE03006EAA MFH 1-Phase Standard Duct Heating System, 120 VAC, 6 in Duct, 250 CFM Flow Rate, Domestic HSI#: MFHE03006EAA-13251Call for availability$2,458.00$2,458.00
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrowâ„¢ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade













