Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Hole Making & Finishing Machinery
-
![JET® JW1015 Y-Fitting, 4 in dia, Use with Dust Collector, Plastic]()
JET® JW1015 Y-Fitting, 4 in dia, Use with Dust Collector, Plastic HSI#: JW1015Call for availability$14.65$14.65 -
![JET® 577101 Bench Grinder, 6 in dia x 3/4 in W Wheel, 1/2 in Arbor/Shank, 3450 RPM Speed, 1/2 hp]()
JET® 577101 Bench Grinder, 6 in dia x 3/4 in W Wheel, 1/2 in Arbor/Shank, 3450 RPM Speed, 1/2 hp HSI#: TEL80004Call for availability$373.23$373.23 -
![Milwaukee® 43-98-0050 Plastic Knob, Use with 4202 Serial 598C Electromagnetic Drill Stand]()
Milwaukee® 43-98-0050 Plastic Knob, Use with 4202 Serial 598C Electromagnetic Drill Stand HSI#: PTS22120Call for availability$2.86$2.86 -
![JET® 577103 Bench Grinder, 10 in dia x 1 in W Wheel, 1 in Arbor/Shank, 1725 RPM Speed, 1-1/2 hp]()
JET® 577103 Bench Grinder, 10 in dia x 1 in W Wheel, 1 in Arbor/Shank, 1725 RPM Speed, 1-1/2 hp HSI#: 577103-13455Call for availability$986.40$986.40 -
![Milwaukee® 22-64-0076 Replacement Cord Set, Use with 4202 Serial 598C Electromagnetic Drill Stand, 120 VAC, (3) 14 AWG Conductors]()
Milwaukee® 22-64-0076 Replacement Cord Set, Use with 4202 Serial 598C Electromagnetic Drill Stand, 120 VAC, (3) 14 AWG Conductors HSI#: PTS20885Call for availability$40.10$40.10 -
![Milwaukee® 49-59-0020 Chuck Adapter, 3/4 to 1/2 in Shank, For Use with M18™ Fuel™ 1-1/2 in Magnetic Drill and 3/4 in Weldon Shank Annular Cutter]()
Milwaukee® 49-59-0020 Chuck Adapter, 3/4 to 1/2 in Shank, For Use with M18™ Fuel™ 1-1/2 in Magnetic Drill and 3/4 in Weldon Shank Annular Cutter HSI#: 49-59-0020-11961Call for availability$106.75$106.75 -
![JET® JW1031, 4 in dia x 10 ft L, For Use with Dust Collector]()
JET® JW1031, 4 in dia x 10 ft L, For Use with Dust Collector HSI#: JW1031-13455Call for availability$50.63$50.63 -
![Metabo® 619200420 Bench Grinder, 8 in dia x 1-1/4 in W Wheel, 1-1/4 in, 3570 rpm, Bare Tool]()
Metabo® 619200420 Bench Grinder, 8 in dia x 1-1/4 in W Wheel, 1-1/4 in, 3570 rpm, Bare Tool HSI#: 619200420-11905Call for availability$360.81$360.81 -
![Milwaukee® 06-83-6015 Set Screw, For Use with 4270-20 Serial 373A Magnetic Stand Assembly, 5/16-24 x 1/4 in]()
Milwaukee® 06-83-6015 Set Screw, For Use with 4270-20 Serial 373A Magnetic Stand Assembly, 5/16-24 x 1/4 in HSI#: 06-83-6015-11961Call for availability$1.27$1.27 -
![Milwaukee® 06-87-2550 Handle Screw, For Use with 4270-20 Serial 373A Magnetic Stand Assembly]()
Milwaukee® 06-87-2550 Handle Screw, For Use with 4270-20 Serial 373A Magnetic Stand Assembly HSI#: 06-87-2550-11961Call for availability$0.00$4.98 -
![Milwaukee® 06-75-3050 Socket Head Socket Head Screw, For Use with 4203-50 Serial 838A Electromagnetic Drill Stand, 1/4-20 x 3/4 in]()
Milwaukee® 06-75-3050 Socket Head Socket Head Screw, For Use with 4203-50 Serial 838A Electromagnetic Drill Stand, 1/4-20 x 3/4 in HSI#: PTS20265Call for availability$0.00$0.98 -
![Milwaukee® 44-26-0070 Electromagnet, For Use with 4270-20 Serial 373A Magnetic Stand Assembly]()
Milwaukee® 44-26-0070 Electromagnet, For Use with 4270-20 Serial 373A Magnetic Stand Assembly HSI#: 44-26-0070-11961Call for availability$280.66$280.66 -
![Milwaukee® 49-96-0050 Socket Wrench, For Use with 4203-50 Serial 838A Electromagnetic Drill Stand, 3/32 in]()
Milwaukee® 49-96-0050 Socket Wrench, For Use with 4203-50 Serial 838A Electromagnetic Drill Stand, 3/32 in HSI#: 49-96-0050-11961Call for availability$0.00$0.98 -
![Milwaukee® 38-50-5485 Drill Spindle, For Use with 4270-20 Serial 373A Magnetic Stand Assembly]()
Milwaukee® 38-50-5485 Drill Spindle, For Use with 4270-20 Serial 373A Magnetic Stand Assembly HSI#: 38-50-5485-11961Call for availability$25.39$25.39 -
![Milwaukee® 06-97-4050 Split Ring Lock Washer, For Use with 4203-50 Serial 838A Electromagnetic Drill Stand, 1/4 in]()
Milwaukee® 06-97-4050 Split Ring Lock Washer, For Use with 4203-50 Serial 838A Electromagnetic Drill Stand, 1/4 in HSI#: PTS20432Call for availability$1.27$1.27 -
![Milwaukee® 22-18-1010 Carbon Brush Assembly, For Use with 4270-20 Serial 373A Magnetic Stand Assembly]()
Milwaukee® 22-18-1010 Carbon Brush Assembly, For Use with 4270-20 Serial 373A Magnetic Stand Assembly HSI#: 22-18-1010-11961Call for availability$4.28$4.28 -
![Palmgren® 9670101 Pedestal Stand, 3-1/2 in dia, 10 in x 11 in Table Size, 15 in x 16-1/2 in Base Size, 31-3/4 in Height, For Use with 6 in, 7 in]()
Palmgren® 9670101 Pedestal Stand, 3-1/2 in dia, 10 in x 11 in Table Size, 15 in x 16-1/2 in Base Size, 31-3/4 in Height, For Use with 6 in, 7 in HSI#: 9670101-10340Call for availability$218.75$218.75 -
![Powermatic® 1791075B, 20 in dia, For Use with PM1900TX]()
Powermatic® 1791075B, 20 in dia, For Use with PM1900TX HSI#: 1791075B-13455Call for availability$333.23$333.23 -
![Powermatic® 1791079K PM1300TX-CK with 2 Micron Canister Kit, 1-3/4 hp, 115/230 VAC, 1064 CFM at 6 in, 75 to 90 dB]()
Powermatic® 1791079K PM1300TX-CK with 2 Micron Canister Kit, 1-3/4 hp, 115/230 VAC, 1064 CFM at 6 in, 75 to 90 dB HSI#: 1791079K-13455Call for availability$1,706.23$1,706.23 -
![Powermatic® 1792071K PM1900TX-BK1 with 30 Micron Bag Filter, 3 hp, 230 VAC, 1754 CFM at 8 in/860 CFM at 6 in/234 CFM at 4 in, 86 to 92 dB]()
Powermatic® 1792071K PM1900TX-BK1 with 30 Micron Bag Filter, 3 hp, 230 VAC, 1754 CFM at 8 in/860 CFM at 6 in/234 CFM at 4 in, 86 to 92 dB HSI#: 1792071K-13455Call for availability$2,226.10$2,226.10 -
![Powermatic® 1792074K PM1900TX-CK3 with 2 Micron Canister Kit, 3 hp, 230/460 VAC, 1782 CFM at 8 in/860 CFM at 6 in/236 CFM at 4 in, 86 to 92 dB]()
Powermatic® 1792074K PM1900TX-CK3 with 2 Micron Canister Kit, 3 hp, 230/460 VAC, 1782 CFM at 8 in/860 CFM at 6 in/236 CFM at 4 in, 86 to 92 dB HSI#: 1792074K-13455Call for availability$2,599.33$2,599.33 -
![Milwaukee® 4274-21 Permanent Magnetic Drill Kit, 3/4 in Chuck, 2.3 hp, 1-1/4 in Drill to Center From Base, 475/730 rpm Spindle Speed, 120 VAC]()
Milwaukee® 4274-21 Permanent Magnetic Drill Kit, 3/4 in Chuck, 2.3 hp, 1-1/4 in Drill to Center From Base, 475/730 rpm Spindle Speed, 120 VAC HSI#: 4274-21-11961Call for availability$1,799.00$1,799.00 -
![JET® 756018 MSS-1 Manual Shrinker Stretcher]()
JET® 756018 MSS-1 Manual Shrinker Stretcher HSI#: 756018-13455Call for availability$2,014.45$2,014.45 -
![JET® 351191K Air Powered Drawbar Kit, For Use with Model JTM1254VS CNC Milling Machines]()
JET® 351191K Air Powered Drawbar Kit, For Use with Model JTM1254VS CNC Milling Machines HSI#: 351191K-13455Call for availability$1,732.88$1,732.88 -
![JET® 351188K Air Powered Drawbar Kit, For Use with Model JTM4VS CNC Milling Machines]()
JET® 351188K Air Powered Drawbar Kit, For Use with Model JTM4VS CNC Milling Machines HSI#: 351188K-13455Call for availability$1,732.88$1,732.88 -
![JET® 350193K Air Powered Drawbar Kit, For Use with Model JTM1050/JTM125RVS Milling Machines]()
JET® 350193K Air Powered Drawbar Kit, For Use with Model JTM1050/JTM125RVS Milling Machines HSI#: 350193K-13455Call for availability$1,732.88$1,732.88 -
![JET® 350197K Air Powered Drawbar Kit, For Use with Model JTM1050EVS/949EVS Milling Machines]()
JET® 350197K Air Powered Drawbar Kit, For Use with Model JTM1050EVS/949EVS Milling Machines HSI#: 350197K-13455Call for availability$1,732.88$1,732.88 -
![JET® 350192K Air Powered Drawbar Kit, For Use with Model JTM1254VS CNC Milling Machines]()
JET® 350192K Air Powered Drawbar Kit, For Use with Model JTM1254VS CNC Milling Machines HSI#: 350192K-13455Call for availability$1,732.88$1,732.88 -
![JET® 698088 JTM-1254RVS Vertical Milling Machine with X/Y/Z Powerfeeds, 5 hp, 230/460 V, 12 in L x 54 in W Table, R-8 Spindle]()
JET® 698088 JTM-1254RVS Vertical Milling Machine with X/Y/Z Powerfeeds, 5 hp, 230/460 V, 12 in L x 54 in W Table, R-8 Spindle HSI#: 698088-13455Call for availability$32,791.83$32,791.83 -
![JET® Elite 894166 ETM-949 3-Phase Milling Machine with 3-Axis Newall DP700 (Knee) DRO, X-Axis JET® Powerfeeds, 3 hp, 230/460 VAC, 9 in L x 49 in W Table]()
JET® Elite 894166 ETM-949 3-Phase Milling Machine with 3-Axis Newall DP700 (Knee) DRO, X-Axis JET® Powerfeeds, 3 hp, 230/460 VAC, 9 in L x 49 in W Table HSI#: 894166-13455Call for availability$37,990.50$37,990.50 -
![JET® 894161 Elite ETM-949 3-Phase Milling Machine with 3-Axis Newall DP700 (Quill) DRO, X, Y-Axis JET® Powerfeeds, 3 hp]()
JET® 894161 Elite ETM-949 3-Phase Milling Machine with 3-Axis Newall DP700 (Quill) DRO, X, Y-Axis JET® Powerfeeds, 3 hp HSI#: 894161-13455Call for availability$39,056.83$39,056.83 -
![JET® 894129 Elite ETM-949 3-Phase Milling Machine with 3-Axis Acu-Rite 203 (Knee) DRO, X, Y, Z-Axis JET® Powerfeeds, 230/460V AC]()
JET® 894129 Elite ETM-949 3-Phase Milling Machine with 3-Axis Acu-Rite 203 (Knee) DRO, X, Y, Z-Axis JET® Powerfeeds, 230/460V AC HSI#: 894129-13455Call for availability$44,788.83$44,788.83 -
![JET® Elite 894124 ETM-949 3-Phase Milling Machine with 3-Axis Acu-Rite 203 (Knee) DRO, X-Axis JET® Powerfeeds, 3 hp, 230/460 VAC, 9 in L x 49 in W Table]()
JET® Elite 894124 ETM-949 3-Phase Milling Machine with 3-Axis Acu-Rite 203 (Knee) DRO, X-Axis JET® Powerfeeds, 3 hp, 230/460 VAC, 9 in L x 49 in W Table HSI#: 894124-13455Call for availability$37,324.00$37,324.00 -
![JET® 894168 Elite ETM-949 3-Phase Milling Machine with 3-Axis Newall DP700 (Knee) DRO, X, Y-Axis JET® Powerfeeds, 230/460V AC]()
JET® 894168 Elite ETM-949 3-Phase Milling Machine with 3-Axis Newall DP700 (Knee) DRO, X, Y-Axis JET® Powerfeeds, 230/460V AC HSI#: 894168-13455Call for availability$39,590.17$39,590.17 -
![JET® 894126 Elite ETM-949 3-Phase Milling Machine with 3-Axis Acu-Rite 203 (Knee) DRO, X, Y-Axis JET® Powerfeeds, 230/460V AC]()
JET® 894126 Elite ETM-949 3-Phase Milling Machine with 3-Axis Acu-Rite 203 (Knee) DRO, X, Y-Axis JET® Powerfeeds, 230/460V AC HSI#: 894126-13455Call for availability$38,657.00$38,657.00 -
![JET® 894123 Elite ETM-949 3-Phase Milling Machine with 3-Axis Acu-Rite 203 (Knee) DRO, 3 hp, 230/460V AC, 9 in L x 49 in W Table]()
JET® 894123 Elite ETM-949 3-Phase Milling Machine with 3-Axis Acu-Rite 203 (Knee) DRO, 3 hp, 230/460V AC, 9 in L x 49 in W Table HSI#: 894123-13455Call for availability$34,924.67$34,924.67 -
![JET® 698111 JTM-1254RVS Vertical Milling Machine with Acu-Rite 203 DRO, X/Y Powerfeeds and Air Power Drawbar, 5 hp, 230/460 V, 12 in L x 54 in W Table]()
JET® 698111 JTM-1254RVS Vertical Milling Machine with Acu-Rite 203 DRO, X/Y Powerfeeds and Air Power Drawbar, 5 hp, 230/460 V, 12 in L x 54 in W Table HSI#: 698111-13455Call for availability$37,723.83$37,723.83 -
![JET® 894158 Elite ETM-949 3-Phase Milling Machine with 3-Axis Newall DP700 (Quill) DRO, 3 hp, 230/460V AC, 9 in L x 49 in W Table]()
JET® 894158 Elite ETM-949 3-Phase Milling Machine with 3-Axis Newall DP700 (Quill) DRO, 3 hp, 230/460V AC, 9 in L x 49 in W Table HSI#: 894158-13455Call for availability$35,991.00$35,991.00
