The browser you are using is not compatible with our site. For a better experience on our website please use one of these browsers:
Google Chrome | Microsoft Edge | Mozilla Firefox | Apple Safari Update Browser
Google Chrome | Microsoft Edge | Mozilla Firefox | Apple Safari Update Browser
Toggle Nav
Questions? Give Us A Call
Rigging Solutions
HSI Services
Shop by brand
FEATURED BRANDS
Resources
About Us
- All Products
- Slings, Lifting & Rigging
- Fall Protection
Featured Products
- Construction Supply / Jobsite Ops
Featured Products
-
Dixon® Cc1425 Coil-Chief Self-Storing Air Hose, 1/4 In, MNPT, 25 Ft L, 185 Psi, Nylon, Domestic
-
Klein® Et250 Digital Voltage Continuity Tester, 2 to 600 VAC/VDC, Digital LCD Display
-
Southwire® Polar/Solar® 1488Sw0002 Type Sjeow Extension Cord, 125 Vac, (3) 14 Awg Copper Conductor, 50 Ft L
-
Dixon® Hss40 Worm Gear Clamp, 2-1/16 To 3 In Clamp, Stainless Steel Band, Domestic
-
Weller® Wlc200 Consumer Soldering Station, 120 Vac Input/Output, 5 To 80 W, 900 Deg F
-
TPI 198Tmc 1-Phase Radiant/Fan Forced Standard Portable Electric Heater, 5120 Btu, 120 Vac, 12.5/7.5/5 A, 50/60 Hz, 1500/900/600 W
-
Weather Guard® 346-0-02 Short Hi-Side Box, 16 In H X 13-1/4 In W X 45-1/2 In D, 11.8 Cu-Ft, Clear
-
Dixon® 4000 Worm Gear Make-A-Clamp Kit, Stainless Steel, Domestic
-
Bernzomatic® 304182 Hand Torch Cylinder, For Use With Propane Fueled Torches And Bernzomatic Torch, Liquid Propane, Steel
-
- Safety & Security
Featured Products
- Power Tools
Featured Products
-
Ridgid® 93557 K-6200 Drum Drain Cleaning Machine Kit, 3 To 6 In Drain Line, 200 Ft. Max Run, 4/10 HP, 115 Vac
-
Bosch 1375A Compact Corded Small Angle Grinder, 4-1/2 In Wheel, 5/8-11, 120 V, Blue
-
Milwaukee® 2629-20 M18™ Cordless Band Saw, 3-1/4 In Cutting, 35.375 In L X 0.5 In W X 0.02 In Thk Blade, 18 Vdc, 4 Ah Li-Ion Battery, Bare Tool
-
Hougen® HMD917 Heavy Duty, 250/450 RPM Spindle, 115/230 VAC
-
- Hand Tools
Featured Products
-
Klein® D2000-9St 2000 Heavy Duty Rebar Work Cutting Plier, 1-1/4 in, 1-19/32 in L X 1-1/4 in W X 1-19/32 in Thick Knurled/Square Steel Jaw, 9-3/8 in OAL
-
Stanley® Fatmax® 33-716 Measuring Tape, 1-1/4 In W X 16 Ft L Blade, Steel, Sae, 1/16 In/Ft
-
Channellock® 426 Tongue And Groove Plier, 0.87 In, 0.81 In L X 0.47 In Thk Straight C1080 High Carbon Steel Jaw, 6-1/2 In OAL
-
Estwing® E324S Framing Hammer, 16 In OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
-
Stanley® Super Wonder Bar® 55-525 Pry Bar, Beveled/Flat Tip, 15 In OAL, Forged High Carbon Steel
-
- Material Handling, Hydraulics & Storage
Featured Products
-
Knaack® Monster Box® 1020 Cabinet Box, 54-1/2 In X 30 In W X 66 In D, 52 Cu-Ft Storage, Steel
-
Louisville® FS1506 Standard Step Ladder, 6 ft Ladder, 300 lb Load, IA, Fiberglass, 5 Steps
-
Jet® PTW-2048 Premium Pallet Truck, 6000 lb Load
-
Greenlee® 38733 Hand Truck Wire Cart, 22-1/2 In L X 23 In W X 46 In H
-
- MRO Supplies
Featured Products
-
Gorilla® 6035120 Rugged Tough Duct Tape, 2 In W X 35 Yd L
-
Rubbermaid® 7580-88 Wavebrake® Mopping Bucket And Wringer Combo Pack, 35 Qt, 20.1 In L, Plastic, Yellow
-
WD-40® 490118 Multi-Use Lubricant, 1 Gal Can, Liquid, Light Amber, 0.8
-
Quikrete® 1101-80 Concrete Mix, 80 Lb Bag, Gray
-
Ipg® 83689 Utility Grade Duct Tape, 48 mm W X 54.8 M L, 0.2 mm Thk
-
Weiler® 40074 Heavily Filled Varnish Brush, 2 In China Bristle Brush, Plastic Handle
-
Krylon® Quik-Mark™ A03610 Water Base Inverted Marking Paint, 20 oz, Liquid, Fluorescent Safety Red, 332 Linear Ft
-
Ipg® 1969 Pg 2 Medium Grade Carton Sealing Dispenser, 5-1/2 In Roll, 3 In Core, Reinforced Steel/High Impact Plastic Frame, Gray
-
Weiler® 42032 Tapered Tip Push Broom, 16 In OAL, 6-1/4 In Trim, Reddish Brown Bass/Palmyra Blend Bristle
-
Weiler® 75104 Cut End Wet Mop Head
-
- Cutting Tools & Metalworking
Featured Products
-
Hougen® RotaCut™ 11128, 11/16 in Dia, 1/4 in Thickk Cut, M2 HSS Bit
-
Milwaukee® 4208-1 Adjustable Position Heavy Duty, 1-1/4 In Chuck, 2 Hp, 4-3/8 In Drill To Center From Base, 250/500 RPM Spindle, 120 Vac
-
DeWalt® Dw5234 Premium, 7/16 In Dia X 6 In L, 3/8 In Round With Flat Shank, Carbide
-
Milwaukee® 49-56-0203 Hole Dozer™ Hole Saw, 3-3/4 In Dia, 1-5/8 In D Cutting, Bi-Metal/Cobalt Cutting Edge, 43228 Arbor
-
- Abrasives
Featured Products
-
SAIT® 81806 Da-F Open Coated Handy Roll, 1-1/2 In W X 50 Yd L, 180X/Fine, Aluminum Oxide Abrasive, Cloth Backing
-
Walter Portacut™ 11-A 141 Type 1 Fast Cut Cut-Off Wheel, 14 In Dia X 1/8 In Thk, 20 mm, A24 Grit, Aluminum Oxide Abrasive
-
Metabo® 616732000 Type 1 Cut-Off Wheel 5 In X 3/32 X 7/8 A30R
-
CGW® 39915 Contaminate Free Coated Flap Wheel 1-1/2 In Dia 1/4 In 60 Grit
-
SAIT® 26000 A16 Type 11 General Purpose Cup Wheel, 4 In Dia X 2 In Thk, 5/8-11
-
Norton® Crystolon® 61463687750 Utility File, 14 In L, Square Tapered, Coarse
-
DeWalt® Xp™ DW4777 General Purpose Cup Wheel, 5 In Dia, 5/8-11, 2 Rows
-
Anderson Products 11215 Stcm Narrow Face Wire Wheel Brush, 4 In Dia X 3/16 In W, 5/8-11, 0.02 In Stringer Bead/Twist Knot Wire
-
- Fasteners & Hardware
Featured Products
-
Powers® Power-Stud+® Sd1 7449Sd1 Wedge Expansion Anchor, 3/4 In Dia, 10 In OAL, 7-1/2 In L Thread, Carbon Steel, Zinc Plated
-
BBI 777037 All Threaded Rod 3/8-16 X 12 Ft Zinc Plated
-
Campbell® T3899724 Hitch Pin, 1/2 In Dia, 4-1/4 In L Usable, Forged Steel, Zinc Plated With Yellow Chromate, 5
-
Primesource® 8Ctdskr Sinker Nail, 17/64 In, 2-3/8 In L, Smooth Shank, 9 Ga, Vinyl Coated
-
BBI 754072 Medium Split Lock Washer, 1/2 In, 18-8 Stainless Steel
-
- Other
Featured Products
-
Norgren® By Dixon® F74G-4M-MB Excelon® General Purpose Standard Compressed Air Filter With 1/4 Turn Manual Drain, Without Service Life Indicator, 1/2 in PTF Port, 250 psig Pressure Range, 140 SCFM Flow Rate, 40 Micron, -30 To 175° F, Zinc Bowl
-
Wilkerson® By Dixon® F30-06AMB Jumbo Airline Particulate Filter With Sight Glass, 3/4 in NPT/Bspp-G Port, 200 psig Pressure Range, 316 SCFM Flow Rate, 5 Micron, 32 To 150° F, Zinc Bowl
-
Yamaha EF2000ISV2 EF2000IS 4-Stroke Air Cooled Lightweight Quiet Single Cylinder Portable Inverter Generator, 120 Vac, 13.3/16.7 A, 2 kW, 79 Cc Engine, 1.1 gal Fuel Tank
-
Watts By Dixon® R119-04CG Relieving Standard Regulator With GC230 Gauge, 1/2 in NPT, 150 SCFM Flow Rate, 2 To 125 psig Pressure
-
GearWrench® 2901D Brake Bleeder Tank
-
Dixon® D101 Heavy Duty Tire Pressure Gauge With Swivel Dual Foot Chuck Inflator
-
La-Co® Sure-Chek® Non-Corrosive Liquid Leak Detector, 1 Pt, -55 To 200° F, Blue/Green
-
Black+Decker® D55151 Continuous Oil Lubricated Hand Carry Heavy Duty Portable Electric Air Compressor, 3.2 CFM, 1.1 Hp, 125 psi, Twin Stack 4 gal Tank
-
Dixon® 851661 Oil Adjustment Valve Assembly, For Use With In-Line Lubricator
-
- Slings, Lifting & Rigging
HSI® Three Leg Nylon Bridle Slings | Oblong Link to Eye Ends | Heavy Duty Nylon Webbing
CM® Bandit™ Ban150Lcx Less Chain Ratchet Lever Hoist, 1-1/2 Ton Load
CM® M3404A Swivel Rigging Hook Without Latch, 1 Ton Load, Eye Attachment, 1.06 In Hook Opening
3M™ DBI-SALA® 1003000 Tie Off Adaptor 3 Ft
Miller® By Honeywell Ac-Qc/Ugn Aircore™ Lightweight Unisex Harness
3M™ DBI-SALA® 2101630 Anchorage Plate Dee Ring
3M™ DBI-SALA® 5000335 Lad-Saf™ Mobile Rope Grab 5/8 In
3M™ DBI-SALA® 3101276 Nano-Lok™ Self-Retracting Lifeline 6 Ft Twin Leg
First Aid Only® 24-102 Eyewash Station, 16 oz
Jackson Safety* 14982 W10 Flip Front Passive Welding Helmet, 10, Black, 2 X 4-1/4 In Viewing
Jbc™ Revolution Plain Traffic Cone With 6 In Reflective Collar
Moldex® 6900 Pura-Fit® Corded Single Use Disposable Ear Plug, Universal, 33 Db, Tapered, Green
Quick Order Pad
Cutting Tools & Metalworking | Hanes Supply, Inc.
Cutting and metalworking requires precise, durable tools. Our construction and industrial supply inventory contains a wide range of cutting tools including metalworking tools, drill bits, saw blades, tapping and threading tools, and more.
We partner with the best trusted name brands in cutting tools and metalworking tools, including MK Morse®, Lenox®, Hougen®, JET®, DeWalt®, Milwaukee®, and more to deliver the results our customers depend on.
We supply cutting tools and metalworking tools for every industry. If you have questions about what cutting tools are best suited for your needs, please contact one of Hanes’ product experts at 1-888-426-3755.
Jump to Category:
Debur and buff materials quickly with polished results. Our inventory of abrasive finishing machines includes belt and disc sanders and grinding and buffing machines.
Shop All
Hanes provides drill bits for a variety of functions. Cable bits, double end drill bits, jobber length bits, step drills, spade drills, wood drill bits, and more come in a variety of sizes and materials, including drill bit sets.
Shop All
Create holes with ease and accuracy with Hanes Supply’s drilling and holemaking tools. Our inventory includes annular cutters, screw extractors, hole cutters, hole saws, hammer drill bits, and more.
Shop All
Our metal working hand tools include individual tools and tool sets for flexible use in many metal working applications. We provide high quality punches and punch sets for easy forming, centering pins for precise centering, stamping dies, and replacement parts and accessories.
Shop All
Milwaukee® metalworking machinery products are known for their quality and durability. Our product line includes drill presses, pipe beveling and pipe grooving machines, pipe threaders, and more.
Shop All
We provide saw blades for any saw cutting application. Our saw blade inventory includes circular, diamond, band saw, reciprocating saw, jig, and hack saw blades. Made of high quality materials, our saw blades are built for durability and strength.
Shop All
Our tapping and threading tools include extractors, hand taps, hex dies, tap wrenches, and more. Create screw threads easily with quality taps and threaders.
Shop All
Chuck keys and chuck key holders, collet accessories, drill adapters, and drill chucks are some of the products available in our tool holding systems category.
Shop All