Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Powder-Actuated Fasteners
-
![DeWALT® 50626 Powder Actuated Load, 0.27 Caliber, Yellow, 4 Level, Use with PA3500 and PA351 Powder Actuated Tool]()
DeWALT® 50626 Powder Actuated Load, 0.27 Caliber, Yellow, 4 Level, Use with PA3500 and PA351 Powder Actuated Tool HSI#: ANC28421Call for availability$0.28$0.28 -
![DeWALT® 50622 Powder Actuated Load, 0.27 Caliber, Green, 3 Level, Use with PA3500 and PA351 Powder Actuated Tool]()
DeWALT® 50622 Powder Actuated Load, 0.27 Caliber, Green, 3 Level, Use with PA3500 and PA351 Powder Actuated Tool HSI#: ANC28420In stock$0.28$0.28 -
![PHD 512H0100CP Hinged Extension Split Tube Clamp, 1 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy]()
PHD 512H0100CP Hinged Extension Split Tube Clamp, 1 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy HSI#: 512H0100CP-12361In stock$1.64$1.64 -
![PHD 151 0250EG Swivel Ring Hanger, 2-1/2 in Pipe, 600 lb, 1/2 in Rod, Carbon Steel, Electro-Galvanized, Domestic]()
PHD 151 0250EG Swivel Ring Hanger, 2-1/2 in Pipe, 600 lb, 1/2 in Rod, Carbon Steel, Electro-Galvanized, Domestic HSI#: 151 0250EG-12361In stock$9.34$9.34 -
![Bostitch® C10P131D C Series 15° Wire Collated Framing Nail, 3 in L, 0.131 in dia, 11 Ga, Coated, Steel]()
Bostitch® C10P131D C Series 15° Wire Collated Framing Nail, 3 in L, 0.131 in dia, 11 Ga, Coated, Steel HSI#: FNA10635In stock$47.30$29.98Savings: $17.32 (37%) -
![Ramset® 1512 1500 Drive Pin, 0.145 in dia x 1-1/2 in L Shank, 0.3 in Head]()
Ramset® 1512 1500 Drive Pin, 0.145 in dia x 1-1/2 in L Shank, 0.3 in Head HSI#: ANC30080In stock$0.18$0.18 -
![Porter-Cable® FN16100 Straight Finish Nail, 1 in L, 16 ga, Coated, Steel]()
Porter-Cable® FN16100 Straight Finish Nail, 1 in L, 16 ga, Coated, Steel HSI#: FN16100-10254In stock$12.43$4.98Savings: $7.45 (60%) -
![Porter-Cable® PDA15250 Angled Finish Nail, 2-1/2 in L, 15 ga, Brite Basic, Steel]()
Porter-Cable® PDA15250 Angled Finish Nail, 2-1/2 in L, 15 ga, Brite Basic, Steel HSI#: PDA15250-10254In stock$85.30$47.98Savings: $37.32 (44%) -
![Simpson Strong-Tie® P22AC4 A-Crimp Powder Load, 0.22 Caliber, Yellow, 4 Level, Use with PT-22A, PT-22GS, PT-22HA and PT-22P Tools]()
Simpson Strong-Tie® P22AC4 A-Crimp Powder Load, 0.22 Caliber, Yellow, 4 Level, Use with PT-22A, PT-22GS, PT-22HA and PT-22P Tools HSI#: P22AC4-12864Call for availability$0.34$0.34 -
![Ramset® 1510SD 1500 Drive Pin with 16 ga Metal Washer, 0.145 in dia x 1-1/4 in L Shank, 0.3 in Head]()
Ramset® 1510SD 1500 Drive Pin with 16 ga Metal Washer, 0.145 in dia x 1-1/4 in L Shank, 0.3 in Head HSI#: ANC30077Call for availability$0.29$0.29 -
![Ramset® 1514SD 1500 Fastener Pin with 7/8 in Washer, 0.145 in dia x 2 in OAL, Zinc Plated]()
Ramset® 1514SD 1500 Fastener Pin with 7/8 in Washer, 0.145 in dia x 2 in OAL, Zinc Plated HSI#: ANC30090Call for availability$0.31$0.31 -
![Simpson Strong-Tie® GDP-75KT Drive Pin with Fuel Cell, 0.106 in dia x 3/4 in L Shank, 0.24 in Head]()
Simpson Strong-Tie® GDP-75KT Drive Pin with Fuel Cell, 0.106 in dia x 3/4 in L Shank, 0.24 in Head HSI#: GDP-75KT-12864Call for availability$176.71$176.71 -
![PHD 512H0200CP Hinged Extension Split Tube Clamp, 2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy]()
PHD 512H0200CP Hinged Extension Split Tube Clamp, 2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy HSI#: 512H0200CP-12361Call for availability$2.18$2.18 -
![PHD 512H0150CP Hinged Extension Split Tube Clamp, 1-1/2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy]()
PHD 512H0150CP Hinged Extension Split Tube Clamp, 1-1/2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy HSI#: 512H0150CP-12361Call for availability$1.91$1.91 -
![PHD 512H0125CP Hinged Extension Split Tube Clamp, 1-1/4 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy]()
PHD 512H0125CP Hinged Extension Split Tube Clamp, 1-1/4 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy HSI#: 512H0125CP-12361Call for availability$1.70$1.70 -
![PHD 512H0075CP Hinged Extension Split Tube Clamp, 3/4 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy]()
PHD 512H0075CP Hinged Extension Split Tube Clamp, 3/4 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Copper Color Epoxy HSI#: 512H0075CP-12361Call for availability$1.43$1.43 -
![PHD 508R3250EG Hinged Extension Split Clamp, 2-1/2 in Pipe/Tube, 1/2 in Rod, 300 lb Load, Malleable Iron, Electro-Galvanized]()
PHD 508R3250EG Hinged Extension Split Clamp, 2-1/2 in Pipe/Tube, 1/2 in Rod, 300 lb Load, Malleable Iron, Electro-Galvanized HSI#: 508R3250EG-12361Call for availability$4.85$4.85 -
![PHD 508R3200EG Extension Split Clamp, 2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic]()
PHD 508R3200EG Extension Split Clamp, 2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic HSI#: 508R3200EG-12361Call for availability$2.64$2.64 -
![PHD 508R3150EG Extension Split Clamp, 1-1/2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic]()
PHD 508R3150EG Extension Split Clamp, 1-1/2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic HSI#: 508R3150EG-12361Call for availability$2.08$2.08Discontinued -
![PHD 508R3125EG Hinged Extension Split Clamp, 1-1/4 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro Galvanized]()
PHD 508R3125EG Hinged Extension Split Clamp, 1-1/4 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro Galvanized HSI#: 508R3125EG-12361Call for availability$1.81$1.81 -
![PHD 508R3100EG Extension Split Clamp, 1 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic]()
PHD 508R3100EG Extension Split Clamp, 1 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic HSI#: 508R3100EG-12361Call for availability$1.51$1.51 -
![PHD 508R3075EG Extension Split Clamp, 3/4 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic]()
PHD 508R3075EG Extension Split Clamp, 3/4 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic HSI#: 508R3075EG-12361Call for availability$1.44$1.44 -
![PHD 508R3050EG Extension Split Clamp, 1/2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic]()
PHD 508R3050EG Extension Split Clamp, 1/2 in Pipe/Tube, 3/8 in Rod, 180 lb Load, Malleable Iron, Electro-Galvanized, Domestic HSI#: 508R3050EG-12361Call for availability$1.21$1.21 -
![DeWALT® PFM2201150 Socket Driver, for use with Hangermate® Wood Rod Hangers, 1/4 in, 3/8 in Rod, Steel, Red]()
DeWALT® PFM2201150 Socket Driver, for use with Hangermate® Wood Rod Hangers, 1/4 in, 3/8 in Rod, Steel, Red HSI#: PFM2201150-12419Call for availability$15.01$15.01 -
![DeWALT® 50203-PWR Powers® High Performance Domed CSI Spiral Knurled Drive Pin, 0.157 in dia x 3/4 in L Shank, 8 mm dia Head]()
DeWALT® 50203-PWR Powers® High Performance Domed CSI Spiral Knurled Drive Pin, 0.157 in dia x 3/4 in L Shank, 8 mm dia Head HSI#: 50203-PWR-12419Call for availability$0.29$0.29 -
![DeWALT® 50096-PWR Powers® Standard Flat Head Drive Pin, 0.145 in dia x 2 in L Shank, 0.3 in dia Head]()
DeWALT® 50096-PWR Powers® Standard Flat Head Drive Pin, 0.145 in dia x 2 in L Shank, 0.3 in dia Head HSI#: 50096-PWR-12419Call for availability$0.24$0.24 -
![DeWALT® PFM2201200 Socket Driver, for use with Hangermate® Steel Rod Hangers, 1/4 in, 3/8 in Rod, Steel]()
DeWALT® PFM2201200 Socket Driver, for use with Hangermate® Steel Rod Hangers, 1/4 in, 3/8 in Rod, Steel HSI#: PFM2201200-12419Call for availability$23.47$23.47 -
![Klein® 69346 Plumber's Kit for Cat. No. 935DAGL]()
Klein® 69346 Plumber's Kit for Cat. No. 935DAGL HSI#: 69346-11611Call for availability$12.99$12.99 -
![Ramset® 1512SD 1500 Fastener Pin with 7/8 in Washer, 0.145 in dia x 1-1/2 in OAL, Zinc Plated]()
Ramset® 1512SD 1500 Fastener Pin with 7/8 in Washer, 0.145 in dia x 1-1/2 in OAL, Zinc Plated HSI#: ANC30085Call for availability$0.30$0.30 -
![Simpson Strong-Tie® GDP-62KT Drive Pin with Fuel Cell, 0.106 in dia x 5/8 in L Shank, 0.24 in Head]()
Simpson Strong-Tie® GDP-62KT Drive Pin with Fuel Cell, 0.106 in dia x 5/8 in L Shank, 0.24 in Head HSI#: GDP-62KT-12864Call for availability$171.53$171.53 -
![Simpson Strong-Tie® GDP-125KT Drive Pin with Fuel Cell, 0.106 in dia x 1-1/4 in L Shank, 0.24 in Head]()
Simpson Strong-Tie® GDP-125KT Drive Pin with Fuel Cell, 0.106 in dia x 1-1/4 in L Shank, 0.24 in Head HSI#: GDP-125KT-12864Call for availability$187.76$187.76 -
![Simpson Strong-Tie® GDP-100KT Drive Pin with Fuel Cell, 0.106 in dia x 1 in L Shank, 0.24 in Head]()
Simpson Strong-Tie® GDP-100KT Drive Pin with Fuel Cell, 0.106 in dia x 1 in L Shank, 0.24 in Head HSI#: GDP-100KT-12864Call for availability$180.86$180.86 -
![Simpson Strong-Tie® PDPAWL-250 Drive Pin with Carbon Steel Washer, 0.157 in dia x 2-1/2 in L Shank, 0.3 in Head]()
Simpson Strong-Tie® PDPAWL-250 Drive Pin with Carbon Steel Washer, 0.157 in dia x 2-1/2 in L Shank, 0.3 in Head HSI#: PDPAWL-250-12864Call for availability$0.28$0.28 -
![Simpson Strong-Tie® PDPAWL-50K Drive Pin with Carbon Steel Washer, 0.157 in dia x 1/2 in L Shank, 0.3 in Head]()
Simpson Strong-Tie® PDPAWL-50K Drive Pin with Carbon Steel Washer, 0.157 in dia x 1/2 in L Shank, 0.3 in Head HSI#: PDPAWL-50K-12864Call for availability$0.21$0.21 -
![Simpson Strong-Tie® PDPAWL-250MG Drive Pin with Carbon Steel Washer, 0.157 in dia x 2-1/2 in L Shank, 0.3 in Head]()
Simpson Strong-Tie® PDPAWL-250MG Drive Pin with Carbon Steel Washer, 0.157 in dia x 2-1/2 in L Shank, 0.3 in Head HSI#: PDPAWL-250MG-12864Call for availability$0.35$0.35 -
![Simpson Strong-Tie® GDP-50KT Drive Pin with Fuel Cell, 0.106 in dia x 1/2 in L Shank, 0.24 in Head]()
Simpson Strong-Tie® GDP-50KT Drive Pin with Fuel Cell, 0.106 in dia x 1/2 in L Shank, 0.24 in Head HSI#: GDP-50KT-12864Call for availability$171.53$171.53 -
![Simpson Strong-Tie® GW50-R200 GW Series Single Shot Step Shank Drive Pin with Dome Washer, 0.11 in, 0.128 in dia x 1/2 in L Shank]()
Simpson Strong-Tie® GW50-R200 GW Series Single Shot Step Shank Drive Pin with Dome Washer, 0.11 in, 0.128 in dia x 1/2 in L Shank HSI#: GW50-R200-12864Call for availability$54.88$54.88 -
![DeWALT® 50506 Powder Actuated Load, 0.22 Caliber, Yellow, 4 Level, Use with P2201 and P7201 Powder Actuated Tool]()
DeWALT® 50506 Powder Actuated Load, 0.22 Caliber, Yellow, 4 Level, Use with P2201 and P7201 Powder Actuated Tool HSI#: 50506-PWR-12419Call for availability$0.16$0.16 -
![DeWALT® 50261-PWR Knurled Spiral CSI Pin, 0.157 in dia x 1-1/4 in L Shank, 8 mm Head]()
DeWALT® 50261-PWR Knurled Spiral CSI Pin, 0.157 in dia x 1-1/4 in L Shank, 8 mm Head HSI#: 50261-PWR-12419Call for availability$0.26$0.26
