Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Milling Products
-
![Metabo® 623564000 Universal Milling Insert, Carbide, Squared Shape]()
Metabo® 623564000 Universal Milling Insert, Carbide, Squared Shape HSI#: 623564000-11905In stock$345.20$345.20 -
![Champion Cutting Tool 601-3/4X1/2 SE Multiflute End Mill]()
Champion Cutting Tool 601-3/4X1/2 SE Multiflute End Mill HSI#: 601-3/4X1/2-10382Call for availability$64.18$64.18 -
![Metabo® 623565000 Milling Insert, Carbide, Squared Shape]()
Metabo® 623565000 Milling Insert, Carbide, Squared Shape HSI#: 623565000-11905Call for availability$330.78$330.78 -
![C.S. Unitec 37125000 PCD Milling Disc for Concrete]()
C.S. Unitec 37125000 PCD Milling Disc for Concrete HSI#: 37125000-10343Call for availability$205.70$205.70 -
![Qualtech DWCWC406 Keyseat/Woodruff Cutter, 3/4 in dia Cutter, 1/8 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC406 Keyseat/Woodruff Cutter, 3/4 in dia Cutter, 1/8 in W Cutting, 1/2 in dia Shank HSI#: DWCWC406-10659Call for availability$35.76$35.76 -
![Qualtech DWCWC405 Keyseat/Woodruff Cutter, 5/8 in dia Cutter, 1/8 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC405 Keyseat/Woodruff Cutter, 5/8 in dia Cutter, 1/8 in W Cutting, 1/2 in dia Shank HSI#: DWCWC405-10659Call for availability$50.43$50.43 -
![Qualtech DWCWC202 Keyseat/Woodruff Cutter, 1/4 in dia Cutter, 1/16 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC202 Keyseat/Woodruff Cutter, 1/4 in dia Cutter, 1/16 in W Cutting, 1/2 in dia Shank HSI#: DWCWC202-10659Call for availability$35.76$35.76 -
![Qualtech DWCWC608 Keyseat/Woodruff Cutter, 1 in dia Cutter, 3/16 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC608 Keyseat/Woodruff Cutter, 1 in dia Cutter, 3/16 in W Cutting, 1/2 in dia Shank HSI#: DWCWC608-10659Call for availability$44.86$44.86 -
![Qualtech DWCWC304 Keyseat/Woodruff Cutter, 1/2 in dia Cutter, 3/32 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC304 Keyseat/Woodruff Cutter, 1/2 in dia Cutter, 3/32 in W Cutting, 1/2 in dia Shank HSI#: DWCWC304-10659Call for availability$35.76$35.76 -
![Qualtech DWCT346A Center Cutting Single End Square End Mill, 1-1/16 in dia Cutter, 2 in Length of Cut, 2 Flutes, 3/4 in dia Shank]()
Qualtech DWCT346A Center Cutting Single End Square End Mill, 1-1/16 in dia Cutter, 2 in Length of Cut, 2 Flutes, 3/4 in dia Shank HSI#: DWCT346A-10659Call for availability$53.00$53.00 -
![Qualtech DWCF315 Non-Center Cutting Single End Square End Mill, 15/32 in dia Cutter, 1 in Length of Cut, 4 Flutes, Bright]()
Qualtech DWCF315 Non-Center Cutting Single End Square End Mill, 15/32 in dia Cutter, 1 in Length of Cut, 4 Flutes, Bright HSI#: DWCF315-10659Call for availability$10.07$10.07 -
![Qualtech DWCXL208 Non-Center Cutting Double End Square End Mill, 1/4 in dia Cutter, 5/8 in Length of Cut, 4 Flutes]()
Qualtech DWCXL208 Non-Center Cutting Double End Square End Mill, 1/4 in dia Cutter, 5/8 in Length of Cut, 4 Flutes HSI#: DWCXL208-10659Call for availability$22.78$22.78 -
![Qualtech DWCF346A Non-Center Cutting Single End Square End Mill, 1-1/16 in dia Cutter, 2 in Length of Cut, 4 Flutes, Bright]()
Qualtech DWCF346A Non-Center Cutting Single End Square End Mill, 1-1/16 in dia Cutter, 2 in Length of Cut, 4 Flutes, Bright HSI#: DWCF346A-10659Call for availability$53.82$53.82 -
![Qualtech DWCXL332 Non-Center Cutting Single End Square End Mill, 3/4 in dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in dia]()
Qualtech DWCXL332 Non-Center Cutting Single End Square End Mill, 3/4 in dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in dia HSI#: DWCXL332-10659Call for availability$57.35$57.35 -
![Qualtech DWCF360 Non-Center Cutting Single End Square End Mill, 1-1/2 in dia Cutter, 2 in Length of Cut, 4 Flutes, 1 in dia Shank]()
Qualtech DWCF360 Non-Center Cutting Single End Square End Mill, 1-1/2 in dia Cutter, 2 in Length of Cut, 4 Flutes, 1 in dia Shank HSI#: DWCF360-10659Call for availability$68.20$68.20 -
![Qualtech DWCF371 Non-Center Cutting Single End Square End Mill, 2 in dia Cutter, 2 in Length of Cut, 4 Flutes, 3/4 in dia Shank, 4-1/2 in OAL, Bright]()
Qualtech DWCF371 Non-Center Cutting Single End Square End Mill, 2 in dia Cutter, 2 in Length of Cut, 4 Flutes, 3/4 in dia Shank, 4-1/2 in OAL, Bright HSI#: DWCF371-10659Call for availability$115.13$115.13 -
![Qualtech DWC24MM-4FSE Non-Center Cutting Single End Square End Mill, 24 mm dia Cutter, 2 in Length of Cut, 4 Flutes]()
Qualtech DWC24MM-4FSE Non-Center Cutting Single End Square End Mill, 24 mm dia Cutter, 2 in Length of Cut, 4 Flutes HSI#: DWC24MM-4FSE-10659Call for availability$62.85$62.85 -
![Qualtech DWCT1142 Center Cutting Single End Ball End Mill, 7/8 in dia Cutter, 2 in Length of Cut, 2 Flutes, 7/8 in dia Shank, 4-5/16 in OAL, Bright]()
Qualtech DWCT1142 Center Cutting Single End Ball End Mill, 7/8 in dia Cutter, 2 in Length of Cut, 2 Flutes, 7/8 in dia Shank, 4-5/16 in OAL, Bright HSI#: DWCT1142-10659Call for availability$57.62$57.62 -
![Qualtech DWCT1162 Center Cutting Single End Ball End Mill, 1-1/4 in dia Cutter, 2-1/2 in Length of Cut, 2 Flutes]()
Qualtech DWCT1162 Center Cutting Single End Ball End Mill, 1-1/4 in dia Cutter, 2-1/2 in Length of Cut, 2 Flutes HSI#: DWCT1162-10659Call for availability$112.54$112.54
