Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Milling Products
-
![Qualtech DWCA1420-60 Dovetail Cutter, 1-3/8 in dia Cutter, 5/8 in dia Weldon Shank, 60° Included, 2-7/8 in OAL]()
Qualtech DWCA1420-60 Dovetail Cutter, 1-3/8 in dia Cutter, 5/8 in dia Weldon Shank, 60° Included, 2-7/8 in OAL HSI#: DWCA1420-60-10659Call for availability$100.15$100.15 -
![Qualtech DWCA1440-60 Dovetail Cutter, 2-1/4 in dia Cutter, 1 in dia Welded-On Shank, 60° Included, 3-3/4 in OAL]()
Qualtech DWCA1440-60 Dovetail Cutter, 2-1/4 in dia Cutter, 1 in dia Welded-On Shank, 60° Included, 3-3/4 in OAL HSI#: DWCA1440-60-10659Call for availability$232.98$232.98 -
![Qualtech DWCA1406-45 Dovetail Cutter, 3/8 in dia Cutter, 3/8 in dia Weldon Shank, 45° Included, 2-1/8 in OAL]()
Qualtech DWCA1406-45 Dovetail Cutter, 3/8 in dia Cutter, 3/8 in dia Weldon Shank, 45° Included, 2-1/8 in OAL HSI#: DWCA1406-45-10659Call for availability$51.31$51.31 -
![Morse® 43567 1897 Non-Center Cutting End Mill, 21/64 in dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in dia Shank, 2-1/2 in OAL]()
Morse® 43567 1897 Non-Center Cutting End Mill, 21/64 in dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in dia Shank, 2-1/2 in OAL HSI#: 43567-12003Call for availability$29.72$29.72 -
![Morse® 44138 4550 Center Cutting End Mill, 5/16 in dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in dia Shank, 2-1/2 in OAL, Bright]()
Morse® 44138 4550 Center Cutting End Mill, 5/16 in dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in dia Shank, 2-1/2 in OAL, Bright HSI#: 44138-12003Call for availability$23.45$23.45 -
![Morse® 43665 1898 Center Cutting End Mill, 3/4 in dia Cutter, 1/5/16 in Length of Cut, 2 Flutes, 5/8 in dia Shank, 3-7/16 in OAL]()
Morse® 43665 1898 Center Cutting End Mill, 3/4 in dia Cutter, 1/5/16 in Length of Cut, 2 Flutes, 5/8 in dia Shank, 3-7/16 in OAL HSI#: 43665-12003Call for availability$63.70$63.70 -
![Morse® 43697 1898 Center Cutting End Mill, 17/32 in dia Cutter, 1-1/8 in Length of Cut, 2 Flutes, 1/2 in dia Shank, 3-1/8 in OAL]()
Morse® 43697 1898 Center Cutting End Mill, 17/32 in dia Cutter, 1-1/8 in Length of Cut, 2 Flutes, 1/2 in dia Shank, 3-1/8 in OAL HSI#: 43697-12003Call for availability$54.88$54.88 -
![Morse® 43676 1898 Center Cutting End Mill, 1 in dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in dia Shank, 3-3/4 in OAL, Bright]()
Morse® 43676 1898 Center Cutting End Mill, 1 in dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in dia Shank, 3-3/4 in OAL, Bright HSI#: 43676-12003Call for availability$110.50$110.50 -
![Morse® 44140 4550 Center Cutting End Mill, 1/2 in dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in dia Shank, 3-1/4 in OAL, Bright]()
Morse® 44140 4550 Center Cutting End Mill, 1/2 in dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in dia Shank, 3-1/4 in OAL, Bright HSI#: 44140-12003Call for availability$31.16$31.16 -
![Morse® 43660 1898 Center Cutting End Mill, 5/8 in dia Cutter, 1-1/8 in Length of Cut, 2 Flutes, 1/2 in dia Shank, 3-1/8 in OAL, Bright]()
Morse® 43660 1898 Center Cutting End Mill, 5/8 in dia Cutter, 1-1/8 in Length of Cut, 2 Flutes, 1/2 in dia Shank, 3-1/8 in OAL, Bright HSI#: 43660-12003Call for availability$52.84$52.84 -
![Morse® 43551 1897 Non-Center Cutting End Mill, 25/32 in dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 1/2 in dia Shank, 3-5/8 in OAL]()
Morse® 43551 1897 Non-Center Cutting End Mill, 25/32 in dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 1/2 in dia Shank, 3-5/8 in OAL HSI#: 43551-12003Call for availability$64.76$64.76 -
![Morse® 44136 4550 Center Cutting End Mill, 3/16 in dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in dia Shank, 2-3/8 in OAL, Bright]()
Morse® 44136 4550 Center Cutting End Mill, 3/16 in dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in dia Shank, 2-3/8 in OAL, Bright HSI#: 44136-12003Call for availability$21.92$21.92 -
![Morse® 44436 4586 Center Cutting End Mill, 1 in dia Cutter, 2 in Length of Cut, 4 Flutes, 1 in dia Shank, 4-1/2 in OAL, Bright]()
Morse® 44436 4586 Center Cutting End Mill, 1 in dia Cutter, 2 in Length of Cut, 4 Flutes, 1 in dia Shank, 4-1/2 in OAL, Bright HSI#: 44436-12003Call for availability$162.09$162.09 -
![Morse® 43652 1898 Center Cutting End Mill, 3/16 in dia Cutter, 7/16 in Length of Cut, 2 Flutes, 3/8 in dia Shank, 2-5/16 in OAL]()
Morse® 43652 1898 Center Cutting End Mill, 3/16 in dia Cutter, 7/16 in Length of Cut, 2 Flutes, 3/8 in dia Shank, 2-5/16 in OAL HSI#: 43652-12003Call for availability$27.61$27.61 -
![Morse® 43677 1898 Center Cutting End Mill, 1 in dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 7/8 in dia Shank, 3-3/4 in OAL, Bright]()
Morse® 43677 1898 Center Cutting End Mill, 1 in dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 7/8 in dia Shank, 3-3/4 in OAL, Bright HSI#: 43677-12003Call for availability$104.67$104.67 -
![Morse® 43661 1898 Center Cutting End Mill, 5/8 in dia Cutter, 1/5/16 in Length of Cut, 2 Flutes, 5/8 in dia Shank, 3-7/16 in OAL]()
Morse® 43661 1898 Center Cutting End Mill, 5/8 in dia Cutter, 1/5/16 in Length of Cut, 2 Flutes, 5/8 in dia Shank, 3-7/16 in OAL HSI#: 43661-12003Call for availability$49.56$49.56 -
![Morse® 43550 1897 Non-Center Cutting End Mill, 23/32 in dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 1/2 in dia Shank, 3-5/8 in OAL]()
Morse® 43550 1897 Non-Center Cutting End Mill, 23/32 in dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 1/2 in dia Shank, 3-5/8 in OAL HSI#: 43550-12003Call for availability$64.91$64.91 -
![Morse® 58516 5951 Center Cutting Extra Long Length Single End End Mill, 1/4 in dia Cutter, 1-1/2 in Length of Cut, 4 Flutes]()
Morse® 58516 5951 Center Cutting Extra Long Length Single End End Mill, 1/4 in dia Cutter, 1-1/2 in Length of Cut, 4 Flutes HSI#: 58516-12003Call for availability$42.72$42.72 -
![Morse® 44213 4552 Center Cutting Extra Long Length Single End End Mill, 7/16 in dia Cutter, 2-3/4 in Length of Cut, 4 Flutes]()
Morse® 44213 4552 Center Cutting Extra Long Length Single End End Mill, 7/16 in dia Cutter, 2-3/4 in Length of Cut, 4 Flutes HSI#: 44213-12003Call for availability$57.53$57.53 -
![Morse® 43278 1895 Double End Non-Center Cutting Regular Length End Mill, 1/2 in dia Cutter, 1 in Length of Cut, 4 Flutes]()
Morse® 43278 1895 Double End Non-Center Cutting Regular Length End Mill, 1/2 in dia Cutter, 1 in Length of Cut, 4 Flutes HSI#: 43278-12003Call for availability$56.76$56.76
