Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Enerpac® CAC352A Collar, for use with CAPT Series 7,600 lb Pivoting T-Arm and Double-Acting Swing Clamp Cylinder, 10° Tilt Angle
Manufacturer #CAC352A
Call for availability
List Price:
$441.00
$441.00
Quantity Break Pricing may apply in the cart
HSI
CAC352A-10764
UPC #:662005412464
Enerpac® CAC352A Collar, for use with CAPT Series 7,600 lb Pivoting T-Arm and Double-Acting Swing Clamp Cylinder, 10° Tilt Angle is available to buy in increments of 1
Product Overview
Enerpac® collar, CAC series, for use with: CAPT series 7,600 lb pivoting t-arm and double-acting swing clamp cylinder, specifications: 10° tilt angle, M5 x 0.8 thread, 2.5 in W x 3.11 in H.
Features
- Easy precise attachment and alignment of arm in any position
- Low force required to tighten arm to shaft
- Vise not required for fastening arm
- Retrofitable to all Enerpac® clip style swing cylinders
- Two retaining rings included with each arm
- New retaining rings do not work with legacy arms
Specifications
| Manufacturer Part Number | CAC352A |
|---|---|
| Manufacturer | Enerpac Tool Group |
| Brand Name | ENERPAC |
| UPC | 662005412464 |
| Warranty | Limited |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review