Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Enerpac® RACH304 Hollow Plunger Single-Acting Spring Return Hydraulic Cylinder, 39.6 ton Capacity, 3.74 in Bore, 3.94 in Length Stroke
Manufacturer #RACH304
Call for availability
List Price:
$3,689.00
$3,689.00
Quantity Break Pricing may apply in the cart
HSI
RACH304-10764
UPC #:662005379033
Enerpac® RACH304 Hollow Plunger Single-Acting Spring Return Hydraulic Cylinder, 39.6 ton Capacity, 3.74 in Bore, 3.94 in Length Stroke is available to buy in increments of 1
Product Overview
Enerpac® hydraulic cylinder, hollow plunger single-acting spring return, 39.6 ton, 3.74 in bore, 3.94 in stroke, 10.52 in retract, base mount, 3/8-18 NPTF, 2.76 in rod dia, 10,000 psi, aluminum housing, hard coated, 5.12 in OD x 14.46 in H.
Features
- Hollow plunger design allows for both pull and push forces
- Composite bearings increase cylinder life and side load resistance
- Hard coat finish on all surfaces resists damage and extends cylinder life
- Floating center tube increases seal life
- Steel baseplate and saddle for protection against load induced damage
- Integral stop ring prevents plunger over travel and is capable of withstanding the full cylinder capacity
- High strength return spring for rapid cylinder retraction
Specifications
| Manufacturer Part Number | RACH304 |
|---|---|
| Manufacturer | Enerpac Tool Group |
| Brand Name | ENERPAC |
| UPC | 662005379033 |
| Warranty | Limited |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review