Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
-
![Milwaukee® 48-22-3529 Torque Lock™ Locking C-Clamp with Deep Jaws, 18 in]()
Milwaukee® 48-22-3529 Torque Lock™ Locking C-Clamp with Deep Jaws, 18 in HSI#: 48-22-3529-11961Call for availability$39.58$39.58 -
![Utility Solutions USBA-001 Blanket Clamp Aid, Rubber End Caps, for use with Rubber Blanket]()
Utility Solutions USBA-001 Blanket Clamp Aid, Rubber End Caps, for use with Rubber Blanket HSI#: USBA-001-17915Call for availability$13.85$13.85 -
![Utility Solutions USBA-002 Blanket Clamp Aid Shotgun Operable, for use with Rubber Blanket]()
Utility Solutions USBA-002 Blanket Clamp Aid Shotgun Operable, for use with Rubber Blanket HSI#: USBA-002-17915Call for availability$13.85$13.85 -
![Milwaukee® 48-22-3521 Swivel Jaw Locking C-Clamp, Polished Chrome, 4 in D Throat, 1-7/64 in Jaw Opening, 11 in Jaw, Forged Alloy Steel]()
Milwaukee® 48-22-3521 Swivel Jaw Locking C-Clamp, Polished Chrome, 4 in D Throat, 1-7/64 in Jaw Opening, 11 in Jaw, Forged Alloy Steel HSI#: 48-22-3521-11961Call for availability$27.97$27.97 -
![Ridgid® 36278 Tristand® 460-12 Portable Pipe Chain Vise, 1/8 to 12 in Pipe, 1500 lb Load]()
Ridgid® 36278 Tristand® 460-12 Portable Pipe Chain Vise, 1/8 to 12 in Pipe, 1500 lb Load HSI#: THA54531Call for availability$719.53$719.53 -
![Ridgid® 40990 Roll, for Use with Model BC-210/210P/410/410P Bench Yoke Vise, Model BC-510/210A/410A/510A Bench Chain Vise]()
Ridgid® 40990 Roll, for Use with Model BC-210/210P/410/410P Bench Yoke Vise, Model BC-510/210A/410A/510A Bench Chain Vise HSI#: 40990-12632Call for availability$12.90$12.90 -
![Wilton® WS6 Shop Vise with Swivel Base, Serrated Jaw, 6 in Jaw Opening, 6 in W Steel Jaw, 3-1/2 in D Throat]()
Wilton® WS6 Shop Vise with Swivel Base, Serrated Jaw, 6 in Jaw Opening, 6 in W Steel Jaw, 3-1/2 in D Throat HSI#: THA83069Call for availability$399.18$399.18 -
![Ridgid® 40130 Tristand® Yoke Vise 40A, 1/8 in Thru 2-1/2 in Capacity]()
Ridgid® 40130 Tristand® Yoke Vise 40A, 1/8 in Thru 2-1/2 in Capacity HSI#: THA55620Call for availability$597.14$597.14 -
![Ridgid® 68625 Chain Link Assembly E1789, for Use with Model C18/C24]()
Ridgid® 68625 Chain Link Assembly E1789, for Use with Model C18/C24 HSI#: THA56510Call for availability$14.85$14.85 -
![Irwin® Quick-Grip® 1964718 1-Handed Medium Duty Next Generation Bar Clamp, 12 in Clamping, 3-3/16 in D Throat, Steel Bar]()
Irwin® Quick-Grip® 1964718 1-Handed Medium Duty Next Generation Bar Clamp, 12 in Clamping, 3-3/16 in D Throat, Steel Bar HSI#: THA10240Call for availability$32.45$32.45 -
![Milwaukee® Torque Lock™ 48-22-3533 Deep Reach Regular Locking C-Clamp, 4-1/2 in Jaw Opening, Forged Alloy Steel]()
Milwaukee® Torque Lock™ 48-22-3533 Deep Reach Regular Locking C-Clamp, 4-1/2 in Jaw Opening, Forged Alloy Steel HSI#: 48-22-3533-11961Call for availability$20.20$20.20 -
![Ridgid® 40980 Chain Screw, for Use with Model BC-210/BC-210P Bench Yoke Vise and Model BC-210A Bench Chain Vise]()
Ridgid® 40980 Chain Screw, for Use with Model BC-210/BC-210P Bench Yoke Vise and Model BC-210A Bench Chain Vise HSI#: 40980-12632Call for availability$16.25$16.25 -
![Bessey® 4800S-24 Heavy Duty High Performance Premium Bar Clamp, 7 in D Throat, 24 in Clamping, 24 in Jaw Opening, Removable Swivel]()
Bessey® 4800S-24 Heavy Duty High Performance Premium Bar Clamp, 7 in D Throat, 24 in Clamping, 24 in Jaw Opening, Removable Swivel HSI#: THA47051Call for availability$323.07$323.07 -
![Bessey® PS55 Regular Seaming Tool, 363 mm L, 10 to 55 mm Opening]()
Bessey® PS55 Regular Seaming Tool, 363 mm L, 10 to 55 mm Opening HSI#: PS55-10227Call for availability$284.24$284.24 -
![Milwaukee® 48-22-3532 Regular Jaw Locking C-Clamp, Polished Chrome, 2-1/4 in D Throat, 1/2 in Jaw Opening, 6 in Jaw, Forged Alloy Steel]()
Milwaukee® 48-22-3532 Regular Jaw Locking C-Clamp, Polished Chrome, 2-1/4 in D Throat, 1/2 in Jaw Opening, 6 in Jaw, Forged Alloy Steel HSI#: 48-22-3532-11961Call for availability$17.97$17.97 -
![Bessey® XM3 Light Duty General Purpose Spring Clamp, 0.855 in W Jaw, 1 in Clamping, 1-1/4 in D Throat, Steel]()
Bessey® XM3 Light Duty General Purpose Spring Clamp, 0.855 in W Jaw, 1 in Clamping, 1-1/4 in D Throat, Steel HSI#: THA47154Call for availability$2.43$2.43 -
![Ridgid® 41155 Chain Assembly, for Use with Model BC-810, 810-A Bench Yoke Vise]()
Ridgid® 41155 Chain Assembly, for Use with Model BC-810, 810-A Bench Yoke Vise HSI#: THA55720Call for availability$223.01$223.01 -
![Ridgid® 40080 Bench Yoke Vise 21A, 1/8 to 2 in Pipe, 4-1/2 in H]()
Ridgid® 40080 Bench Yoke Vise 21A, 1/8 to 2 in Pipe, 4-1/2 in H HSI#: 40080-12632Call for availability$235.42$235.42 -
![Bessey® 4800S-18 Heavy Duty F-Style Bar Clamp, 7 in D Throat, 18 in Clamping, Hex Head Swivel]()
Bessey® 4800S-18 Heavy Duty F-Style Bar Clamp, 7 in D Throat, 18 in Clamping, Hex Head Swivel HSI#: THA47050Call for availability$299.48$299.48 -
![Bessey® ClassiX™ GSM40 Regular Duty F-Style Bar Clamp, 5-1/2 in D Throat, 16 in Clamping, Replaceable Swivel]()
Bessey® ClassiX™ GSM40 Regular Duty F-Style Bar Clamp, 5-1/2 in D Throat, 16 in Clamping, Replaceable Swivel HSI#: GSM40-10227Call for availability$117.70$117.70 -
![Wilton® 14554 O Series Extra Heavy Duty Full Closing Spindle Bridge C-Clamp, 2-3/4 in D Throat, 0 to 4-1/2 in Jaw Opening, 1 in Screw]()
Wilton® 14554 O Series Extra Heavy Duty Full Closing Spindle Bridge C-Clamp, 2-3/4 in D Throat, 0 to 4-1/2 in Jaw Opening, 1 in Screw HSI#: THA30740Call for availability$229.50$229.50 -
![Bessey® XM5 Light Duty General Purpose Spring Clamp, 1 in W Jaw, 2 in Clamping, 2-1/4 in D Throat, Steel]()
Bessey® XM5 Light Duty General Purpose Spring Clamp, 1 in W Jaw, 2 in Clamping, 2-1/4 in D Throat, Steel HSI#: THA47151Call for availability$3.42$3.42 -
![Ridgid® 40195 Top Screw Bench Chain Vise BC410, 1/8 to 4 in Pipe]()
Ridgid® 40195 Top Screw Bench Chain Vise BC410, 1/8 to 4 in Pipe HSI#: THA55648Call for availability$276.61$276.61 -
![Ridgid® 41050 Handle Assembly with Nut, Model 560 Stand Chain Vise and Model 640 Post Chain Vise]()
Ridgid® 41050 Handle Assembly with Nut, Model 560 Stand Chain Vise and Model 640 Post Chain Vise HSI#: PTS52033Call for availability$58.65$58.65 -
![Ridgid® 41235 Tray Support with Screw, for Use with Model 40-A Tristand® Yoke Vise and Model 450/460/460-6/460-12]()
Ridgid® 41235 Tray Support with Screw, for Use with Model 40-A Tristand® Yoke Vise and Model 450/460/460-6/460-12 HSI#: THA55730Call for availability$38.00$38.00 -
![Bessey® GCS-NCB Non-Induction Cone Bearing Heater, 3/5 to 8-1/4 in, 120 VAC, 725 W Power Rating]()
Bessey® GCS-NCB Non-Induction Cone Bearing Heater, 3/5 to 8-1/4 in, 120 VAC, 725 W Power Rating HSI#: GCS-NCB-10227Call for availability$862.73$862.73 -
![Bessey® 3101180 Snap On Standard Pressure Pad, For Use with ClassiX™ Model GS16K, GS12-8K Light Duty Bar Clamps]()
Bessey® 3101180 Snap On Standard Pressure Pad, For Use with ClassiX™ Model GS16K, GS12-8K Light Duty Bar Clamps HSI#: 3101180-10227In stock$10.40$10.40 -
![Bessey® 3100736 Heavy Duty Standard Smooth Face Replacement MorPad, For Use with SLV/GSV Series Rails]()
Bessey® 3100736 Heavy Duty Standard Smooth Face Replacement MorPad, For Use with SLV/GSV Series Rails HSI#: 3100736-10227In stock$24.34$24.34 -
![Guardian® TL7SS Ty-Flot Tool Collar Loop, Stainless Steel, 1.1 in Keyed Opening, 10 pk]()
Guardian® TL7SS Ty-Flot Tool Collar Loop, Stainless Steel, 1.1 in Keyed Opening, 10 pk HSI#: TL7SS-11141In stock$40.60$40.60 -
![Tandemloc AE10000A-1GA Double Cone Two Position Twistloc]()
Tandemloc AE10000A-1GA Double Cone Two Position Twistloc HSI#: AE10000A-1GA-13089In stock$115.24$115.24 -
![Bessey® CDF412CHV CDFCHV Regular Duty C-Clamp, 6-1/4 in D Throat, 0-12 in Clamping]()
Bessey® CDF412CHV CDFCHV Regular Duty C-Clamp, 6-1/4 in D Throat, 0-12 in Clamping HSI#: THA74248In stock$122.35$122.35 -
![Ridgid® 40210 Top Screw Bench Chain Vise, 1/4 to 6 in Pipe, 1/8 to 8 in Load, Anchored Crank Head]()
Ridgid® 40210 Top Screw Bench Chain Vise, 1/4 to 6 in Pipe, 1/8 to 8 in Load, Anchored Crank Head HSI#: THA55654Call for availability$473.03$473.03 -
![Bessey® B-HS4 HS Series Fully Closing Heavy Service C-Clamp, 2-3/4 in D Throat, 0 to 4-1/2 in Clamping]()
Bessey® B-HS4 HS Series Fully Closing Heavy Service C-Clamp, 2-3/4 in D Throat, 0 to 4-1/2 in Clamping HSI#: THA77748Call for availability$193.71$193.71 -
![Irwin® Vise-Grip® Original™ 20 11SP® Fixed Tip Standard Locking C-Clamp with Swivel Pad, Nickel Plated, 2-5/8 in D Throat]()
Irwin® Vise-Grip® Original™ 20 11SP® Fixed Tip Standard Locking C-Clamp with Swivel Pad, Nickel Plated, 2-5/8 in D Throat HSI#: THA10170Call for availability$37.18$37.18 -
![Bessey® 2400S-12 Regular Duty F-Style Bar Clamp, 5-1/2 in D Throat, 12 in Clamping, Removable Swivel]()
Bessey® 2400S-12 Regular Duty F-Style Bar Clamp, 5-1/2 in D Throat, 12 in Clamping, Removable Swivel HSI#: THA47020Call for availability$155.51$155.51 -
![Ridgid® 40205 Top Screw Bench Chain Vise, Rugged Base, 1/8 to 5 in Pipe]()
Ridgid® 40205 Top Screw Bench Chain Vise, Rugged Base, 1/8 to 5 in Pipe HSI#: THA56665Call for availability$352.46$352.46 -
![Milwaukee® 48-22-3531 Regular Jaw Locking C-Clamp, Polished Chrome, 4 in D Throat, 1/2 in Jaw Opening, 11 in Jaw, Forged Alloy Steel]()
Milwaukee® 48-22-3531 Regular Jaw Locking C-Clamp, Polished Chrome, 4 in D Throat, 1/2 in Jaw Opening, 11 in Jaw, Forged Alloy Steel HSI#: 48-22-3531-11961In stock$24.97$24.97 -
![Ridgid® 40100 Model 25A Bench Yoke Vise, Hardened Alloy Steel Jaw]()
Ridgid® 40100 Model 25A Bench Yoke Vise, Hardened Alloy Steel Jaw HSI#: THA55610Call for availability$391.83$391.83
The browser you are using is not compatible with our site. For a better experience on our website please use one of these browsers:
Google Chrome | Microsoft Edge | Mozilla Firefox | Apple Safari Update Browser
Google Chrome | Microsoft Edge | Mozilla Firefox | Apple Safari Update Browser
Toggle Nav
Questions? Give Us A Call
Rigging Solutions
HSI Services
Shop by brand
FEATURED BRANDS
Resources
About Us
- All Products
- Slings, Lifting & Rigging
- Fall Protection
- Construction Supply / Jobsite Ops
-
Safety & Security
-
Power Tools
-
Hand Tools
Featured Products
-
![Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL]()
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
-
![Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL]()
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
-
![Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade]()
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
-
![Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple]()
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
-
![Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle]()
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
-
-
Material Handling, Hydraulics & Storage
- MRO Supplies
- Cutting Tools & Metalworking
- Abrasives
-
Fasteners & Hardware
Featured Products
-
![DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated]()
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
-
![BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy]()
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
-
![BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS]()
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
-
![Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank]()
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
-
![Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade]()
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
-
Search
Quick Order Pad
