Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
HSI® Double Leg Bridle Chain Sling, 3/4 in dia, 26 ft Length, Oblong Link to Foundry Hook, 61,100 lb Working Load Limit
Grade 100 alloy chain slings can be used in the most extreme of conditions as well as in harsh environments without the worry of UV-ray degradation or chemical exposure that other rigging solutions may present. HSI® chain slings offer versatility along with the strength to handle large lifting loads making it a great choice for industrial projects.
Easy to inspect and repair, chain slings are a long service life option tough enough to do the job for years to come. There are numerous configurations available for various attachment points, load sizes and overhead lifting circumstances. HSI® chain slings will conform to the specific usage required to complete your rigging job safely.
HSI® slings are assembled in an ISO 9001:2015 registered facility where quality, safety and efficiency are priority. Audits are conducted every year by an independent third-party to ensure manufacturer compliance with the set standards.
- Rough and Ready: HSI® chain slings are known for their ability to withstand a variety of tough conditions. A great lifting option when the rigging job calls for an application that can handle heat, filthy conditions, exposure to chemicals or extended outdoor use under UV rays
- Foundry Hook: Offers a wider opening and deeper throat than grab hooks and used in situations where it would be dangerous for humans to directly connect or remove load connections. These hooks are primarily used in high-heat applications such as the cast metal industry or cook ovens
- Grade 100 Alloy: Most commonly used for overhead lifting applications due to its excellent energy absorption properties and strength to weight ratio. The material's hardness makes it the logical choice when looking for durability in comparison to other grades that can wear quickly on the inner portion of the link
- American Made Rigging: Hanes Supply, Inc. is proud to be the industry-leading USA based manufacturer of hoisting solutions for industrial construction and building projects since 1930. All slings are manufactured in an ISO 9001:2015 registered facility
| Manufacturer Part Number | 10DOF3/4-26 |
|---|---|
| Manufacturer | Hanes Supply, Inc |
| Brand Name | HSI |
| Sling Type | Bridle |
| Sling Legs | Two |
| Length | 26 ft |
| Chain Size | 3/4 in |
| Grade | 100 |
| 30° Capacity (lb) | 35,300 |
| 45° Capacity (lb) | 49,900 |
| 60° Capacity (lb) | 61,100 |
| End Fitting | Oblong Link to Foundry Hook |
| Safety Factor | 4:1 |
| Master Link Nominal Diameter (in) | 1.5 |
| Master Link Inside Length (in) | 10.5 |
| Master Link Inside Width (in) | 5.25 |
| Package Quantity | 1/Each |
