HSI® Vertical Lifeline Large and Small Double Lock Hook Ends
Manufacturer #
In stock
$54.86
to
$693.99
$54.86 to
$693.99
Quantity Break Pricing may apply in the cart
HSI
HSI-VL
Product Overview
- 5/8" (16mm) diameter polyester/polypropylene blend rope
- Double locking snap hook at one or both ends
- Designed for use by one worker with a trailing grab hook
- Rope is hand spliced to hook eye with protective plastic thimble in eye
- Available in lengths up to 600
Material Specifications
- Rope: 5/8" (16mm) diameter polyester/polypropylene blend 3 strand rope
- Connector: Small or Large ('rebar') alloy steel hook w/ 5,000 lb inline tensile strength, 3,600 lbs
Performance Specifications
- Tensile Strength: Min. 5,000
- Max. Capacity: 310 lb To maintain ANSI Z359 compliance, limit total user weight to 310lbs
Relevant Standards
- OSHA: OSHA 1910.66, OSHA 1926.502
- ANSI: ANSI A10.32, ANSI Z359.1
Warnings
- Read, understand and follow all labels and instructions prior to use
- Inspect before each use
- Remove from service if there is evidence of damage or excessive wear
- Unit requires applicable rope grab device - it cannot be attached via knot or similar to the harness or lanyard
Specifications
| Manufacturer | Hanes Supply, Inc |
|---|---|
| Brands | HSI |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade