Morse® 28-6BE Drum Hand Pump, fits 2 in NPT Drum Bung Thread
Manufacturer #28-6BE
Call for availability
$722.53
$722.53
Quantity Break Pricing may apply in the cart
HSI
28-6BE-12004
Morse® 28-6BE Drum Hand Pump, fits 2 in NPT Drum Bung Thread is available to buy in increments of 1
Product Overview
Use with ketones, acetates up to 2000 SSU viscosity. Model 28-6BE is for use with some acids, caustics, ketones, acetates. Double-action piston pump dispenses 1 gal (3.8 liters) of liquid up to 2000 SSU viscosity in less than 5 strokes. 1 in (2.54 cm) diameter NPT suction tube. 8 ft (2.4 m) long, 3/4 in (1.9 cm) inside diameter, 1 in outside diameter, NPT discharge hose. Self priming barrel pump with built-in siphon breaker. Dispense liquids with viscosity up to 2000 SSU (about as thick as 30 weight motor oil at room temperature). barrel pump handle effort increases as viscosity approaches this maximum. Pump liquids up to 80°F (26°C). WARNING: When pumping flammable or combustible liquids from one container to another, both containers must be effectively bonded and grounded! Chemical Drum Pumps. CAUTION: Check chemical compatibility for each liquid by specific chemical name on Drum Pump Spec Sheet.
Specifications
| Manufacturer Part Number | 28-6BE |
|---|---|
| Manufacturer | Morse Manufacturing |
| Brands | MORSE |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade