Power Team® PE464S Portable Electric Hydraulic Pump, 1-1/2 hp, 2 Stages, 590 in³, 46 in³/min Flow Rate, 0 to 10,000 psi
Manufacturer #PE464S
Call for availability
$9,562.20
$9,562.20
Quantity Break Pricing may apply in the cart
HSI
PE464S-12948
UPC #:662536001885
Power Team® PE464S Portable Electric Hydraulic Pump, 1-1/2 hp, 2 Stages, 590 in³, 46 in³/min Flow Rate, 0 to 10,000 psi is available to buy in increments of 1
Product Overview
Power Team® electric hydraulic pump, portable, series: PE46, 2 stage, 590 in³ reservoir, 1-1/2 hp, 46 in³/min flow rate, 0 to 10,000 psi pressure, 115/230 VAC, 25 A, 60 Hz frequency, 3,450 rpm speed, 11-1/2 in OAL, 9-1/2 in overall width, 19-5/8 in overall height. Two speed high performance pump. For use with single or double acting cylinders at operating pressures to 10,000 psi (700 bar). Equipped with 1-1/2 hp (1.12 kW), 3450 (2875) rpm single phase, 60 (50) Hz thermal protected induction motor that starts under full load. 24 V control circuits on all units with remote controls. Noise level of 77-81 dBA.
Specifications
| Manufacturer Part Number | PE464S |
|---|---|
| Manufacturer | Hydraulic Technologies |
| Brands | POWER TEAM |
| UPC | 662536001885 |
| Length (in) | 11.5 |
| Width (in) | 9.5 |
| Height (in) | 19.63 |
| Product Type | Bare Tool |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade