Power Team® PED253 Electric Hydraulic Pump, 1-1/2 hp, 2 Stages, 1000 in³ Reservoir, 25 in³/min Flow Rate, 100 to 10,000 psi
Manufacturer #PED253
Call for availability
$8,946.24
$8,946.24
Quantity Break Pricing may apply in the cart
HSI
PED253-12948
UPC #:662536211406
Power Team® PED253 Electric Hydraulic Pump, 1-1/2 hp, 2 Stages, 1000 in³ Reservoir, 25 in³/min Flow Rate, 100 to 10,000 psi is available to buy in increments of 1
Product Overview
Power Team® electric hydraulic pump, series: PED, 2 stage, 1000 in³ reservoir, 1-1/2 hp, 25 in³/min flow rate, 100 to 10,000 psi pressure, 115/230 VAC, 22 A, 60 Hz frequency, 3,450 rpm speed, 18 in OAL, 13 in overall width, 20-3/4 in overall height. Two speed pumps have the same low pressure and high pressure flows from both valves. Flows and pressures of each pump are independent. Each power unit contains two separate pumps and two separate valves allowing operator to control multiple processes with one power unit. Both pumps on each power unit are equipped with an externally adjustable pressure relief valve. Not recommended for frequent starting and stopping.
Specifications
| Manufacturer Part Number | PED253 |
|---|---|
| Manufacturer | Hydraulic Technologies |
| Brands | POWER TEAM |
| UPC | 662536211406 |
| Length (in) | 13 |
| Width (in) | 18 |
| Height (in) | 20.75 |
| Product Type | Bare Tool |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade