Power Team® PG553 Gasoline Pump, 1300 in³ Reservoir, 6 hp, 10,000 psi Max Pressure, 55 in³/min Flow Rate
Manufacturer #PG553
Call for availability
$7,586.61
$7,586.61
Quantity Break Pricing may apply in the cart
HSI
PG553-12948
UPC #:662536002103
Power Team® PG553 Gasoline Pump, 1300 in³ Reservoir, 6 hp, 10,000 psi Max Pressure, 55 in³/min Flow Rate is available to buy in increments of 1
Product Overview
Power Team® gasoline pump, series: PG55, 1300 in³ reservoir, 10,000 psi maximum, engine HP: 6 hp, 3,600 rpm engine, 55 in³/min flow rate, 3-way valve, 18 in OAL, 12-1/2 in overall width, 22 in overall height. A logical choice at work sites where electricity or compressed air are unavailable. All gasoline engine/hydraulic pumps feature Posi-Check® valve to guard against pressure loss when valve is shifted from advance to hold. 6 hp (4.5 kW) Intek "Diamond Edge" four-cycle, by Briggs and Stratton, 5 gal (19 L) reservoir. Same basic pump as PE55 series electrical Vanguard® pumps. 9520 three way valve for single acting cylinder. For remote locations for use with cylinders up to 150 ton.
Specifications
| Manufacturer Part Number | PG553 |
|---|---|
| Manufacturer | Hydraulic Technologies |
| Brands | POWER TEAM |
| UPC | 662536002103 |
| Length (in) | 11.5 |
| Width (in) | 18 |
| Height (in) | 22 |
| Product Type | Bare Tool |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade