Power Team® PQ603S-50-220 Single Acting Electric Hydraulic Pump, 2 hp, 2 Stages, 1250 in³ Reservoir, 100 to 10,000 psi Pressure
Manufacturer #PQ603S-50-220
Call for availability
$11,562.67
$11,562.67
Quantity Break Pricing may apply in the cart
HSI
PQ603S-50-220-12948
UPC #:662536132473
Power Team® PQ603S-50-220 Single Acting Electric Hydraulic Pump, 2 hp, 2 Stages, 1250 in³ Reservoir, 100 to 10,000 psi Pressure is available to buy in increments of 1
Product Overview
Power Team® electric hydraulic pump, single acting, series: PQ60, 2 stage, 1250 in³ reservoir, 2 hp, 100 to 10,000 psi pressure, 220 VAC, 11 A, 50 Hz frequency, 1,725 rpm speed, 15-1/2 in OAL, 14-1/4 in overall width, 25-1/8 in overall height. Pump designed specifically for heavy duty, extended cycle operation. For operating single or double acting cylinders. Metal shroud keeps dirt and moisture out of motor and electrical components. Electrical shut down feature prevents unintentional restarting of motor following an electrical service interruption. Pumps operate below maximum OSHA noise limitation. Start and operate under full load, even with voltage reduced by 10%.
Specifications
| Manufacturer Part Number | PQ603S-50-220 |
|---|---|
| Manufacturer | Hydraulic Technologies |
| Brands | POWER TEAM |
| UPC | 662536132473 |
| Product Type | Bare Tool |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade