Ridgid® 53127 Drum Drain Cleaning Machine Kit K-3800, 2 to 4 in Drain Line, 90 ft Max Run, 1/10 hp, 115 VAC, Steel Housing
Manufacturer #53127
Call for availability
$2,162.95
$2,162.95
Quantity Break Pricing may apply in the cart
HSI
53127-12632
UPC #:095691531278
Ridgid® 53127 Drum Drain Cleaning Machine Kit K-3800, 2 to 4 in Drain Line, 90 ft Max Run, 1/10 hp, 115 VAC, Steel Housing is available to buy in increments of 1
Product Overview
The Ridgid® K-3800 drain cleaning machine will clean drain lines up to 4 in dia and 100 ft L. Drum provided with the machine holds up to 100 ft of 3/8 in cable or 90 ft of 1/2 in cable. An optional sink drum holds 50 ft of 5/16 in cable. Both drums include an inner drum to guard against cable flip over. Designed to clean sink lines, floor drains and roof vents. The drum is driven by a 1/10 hp universal series motor that has a grounded electrical system. An integral ground fault interrupter is built into the line cord and a pneumatic foot actuator provides on/off control of the motor. When the cable hits a blockage, the motor gears down automatically to provide more power and greater operator control. The cable is manually fed in and out of the drain. An optional Autofeed® is available that will advance or retract the cable. Drum tilt adjusts to provide proper cable feed angle. The cable has a Quick Change™ coupling system for connecting tools. The drum separates from the motor frame for two-hand transport.
Features
- A powerful, easy to transport, versatile machine for cleaning indoor drains and requires minimal set up to clean sink lines, floor drains and roof vents
- Rugged, corrosion resistant molded cable drum won't dent or rust, the drum tilt adjusts for proper cable feed angle, inner-drum guards against cable flip over inside the drum
- Cable drum's quick-release and built-in hand-holds allow easy cable change and transport
- Maximum drum capacity is 100 ft of 3/8 in or 90 ft of 1/2 in continuous length cable
- Powerful 175 W universal motor spins cable at 240 RPM when cable hits blockage, motor gears down automatically to deliver more power and enhance operator control
- Tools connect to cable in seconds
- Heavy-duty Autofeed® system
- Amperage rating 2A
Specifications
| Manufacturer Part Number | 53127 |
|---|---|
| Manufacturer | Emerson Electric |
| Brands | RIDGID |
| UPC | 095691531278 |
| Length (in) | 25 |
| Width (in) | 15 |
| Height (in) | 26 |
| Product Type | Kit |
| Includes | 1/2 in x 90 ft Cable, T102 Funnel Auger, T142 Knife Blade Cutter, T107 Spade Cutter, A12 Pin Key, RIDIGD® PVC Drain Cleaning Gloves and Operators Manual |
| Warranty | Lifetime |
| Speed | 240 rpm |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade