Manual Chain Hoists
- Harrington® ER2DS1011 Bottom Hook Complete Set, 1 ton HSI#: ER2DS1011-11188Call for availability$232.81$232.81
- Harrington® ZB20025I5025 Push Button 2 Component Assembly, 10 ft Lift HSI#: ZB20025I5025-11188Call for availability$739.20$739.20
- Jet® FEED CONTROL, HYDR. ON/OFF VALVE (TEXT) (HBS1018W-165N) HSI#: HBS1018W-165N-13455Call for availability$338.67$338.67
- Jet® in 1/8 in SET BLOCK in BLOCK (JJ6CSDX-444) HSI#: JJ6CSDX-444-13455Call for availability$43.40$43.40
- CM® 2182 ShopAir Air Chain Hoist, 500 lb Load, 10 ft Lifting Height, Hook, 38 scfm, 90 psi HSI#: 2182-10449Call for availability$3,084.72$3,084.72
- JET® TDC7501970 Chuck Key with Cartridges HSI#: TDC750-1970-13455Call for availability$45.89$45.89
- Harrington® ER2CS4511 Socket Frame Complete Set HSI#: ER2CS4511-11188Call for availability$333.96$333.96
- Harrington® CF4800050 Name Plate with Rivets, 5 ton HSI#: CF4800050-11188Call for availability$34.39$34.39
- Harrington® ZB10025H5040 Push Button 2 Component Set, 15 ft Lift HSI#: ZB10025H5040-11188Call for availability$448.02$448.02
- Harrington® M3B800025 Name Plate B with Rivets HSI#: M3B800025-11188Call for availability$77.05$77.05
- Harrington® ES622D015 Non Revers Relay 220/440# HSI#: ES622D015-11188Call for availability$463.96$463.96
- Harrington® ER1FS1002 Bottom Hook Latch Assembly 2.5, 3 ton HSI#: ER1FS1002-11188Call for availability$19.52$19.52
- CM® 4832 Cyclone® 646 Single Reeved Hand Chain Hoist, 0.5 ton Load, 10 ft H Lifting, 8-7/8 in Min Between Hooks HSI#: 4832-10449Call for availability$4,801.00$4,801.00
- Harrington® LCER2010NP Heavy-Duty Load Chain ER2 NI-PLTD Series, Per Foot HSI#: LCER2010NP-11188Call for availability$30.11$30.11
- Jet® TRANSFORMER 3PH (1/2SS-3C-046UG) HSI#: 1/2SS-3C-046UG-13455Call for availability$321.30$321.30
- Harrington® CF071050 Latch Kit Assembly, 5 ton, Stainless Steel HSI#: CF071050-11188Call for availability$11.80$11.80
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrowâ„¢ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Mayhewâ„¢ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade














