CM® 4223 Lodestar® Model L Single Reeving Electric Chain Hoist, 1 ton Load, 20 ft Lifting Height, 1 hp Power Rating, 115 VAC
Manufacturer #4223
In stock
$4,537.11
$4,537.11
Quantity Break Pricing may apply in the cart
HSI
HOI11108
CM® 4223 Lodestar® Model L Single Reeving Electric Chain Hoist, 1 ton Load, 20 ft Lifting Height, 1 hp Power Rating, 115 VAC is available to buy in increments of 1
Product Overview
CM® Lodestar® electric chain hoist, single reeving, series: model large, 1 ton, 20 ft lifting height, 16 FPM lift speed, 18-9/16 in minimum between hooks, 1-1/8 in hook opening, 1-speed control, 1 hp, 115 VAC.
Features
- Quick change voltage board change from low voltage to high voltage by simply repositioning receptacle
- Up to 3 ton capacities for heavy duty industrial applications
- Gear train lifetime lubricated with non-oxidizing grease
- Precision machined and hardened lift wheel with hardened chain guides for precise chain lift wheel fit
- Gearing designed for exceptionally long life and quiet operation
- H4 duty standard
- Rugged control station (NEMA 4X)
- Hoist duty motor, standard protector overload device and standard screw type limit switches
- Hardened, forged steel, latch type hooks and Hoistaloy® load chain for long dependable service
- Easy to install and maintain
- No special tools required to disassemble
- Each hoist thoroughly inspected and tested to over 125% of rated load prior to shipment
- Metric rated
- Hoists with creep control allow precise positioning through field adjustment within the time delay range of 0.05 to 3 s
Specifications
| Manufacturer Part Number | 4223 |
|---|---|
| Manufacturer | Columbus McKinnon Corporation |
| Brands | CM |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade