Cable Trays & Struts
- PHD S1012 PG Straight Channel Strut, 1-1/8 x 9/16 in Slots, 2 in Spacing, 12 ga Thick, 20 ft L HSI#: FAS50562In stock$2,160.11$67.36Savings:
- PHD S5130 EG 90° Corner Angle Fitting, 4 Holes, 4-3/16 in L x 3-1/2 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.78 lb HSI#: FAS50600In stock$17.52$3.55Savings:
- PHD S3006 EG Strut Nut Without Spring, 3/8 in Thread, Low Carbon Steel HSI#: FAS50551In stock$6.12$0.79Savings:
- PHD S6025 EG FIG 6025 Post Base, Centered Channel Position, 3-1/2 in H Base, Use with 1-5/8 in Strut, Carbon Steel HSI#: FAS50621In stock$115.39$22.44Savings:
- PHD S5112 EG 90° Corner Angle Fitting, 2 Holes, 2-1/16 in L x 1-7/8 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.37 lb HSI#: FAS50598In stock$8.97$1.82Savings:
- PHD S1312 PG Half Slotted Channel, 1-1/8 x 9/16 in Slots, 2 in Spacing, 14 ga Thick, 20 ft L HSI#: FAS50567In stock$1,527.87$37.15Savings:
- PHD S5345 EG Open Angle Connector, 4 Holes, 3-1/2 in L x 3-1/2 in W, 45° Bend, Low Carbon Steel HSI#: FAS50610In stock$20.90$4.18Savings:
- PHD S5131 EG 90° Corner Angle Fitting, 4 Holes, 3-7/8 in L x 3-13/16 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.76 lb HSI#: FAS50602In stock$17.52$3.55Savings:
- PHD S5035 EG Flat Tee plate, 4 Holes, 5-3/8 in L x 3-1/2 in W, Carbon Steel HSI#: FAS60000In stock$28.50$5.52Savings:
- PHD S5110 EG 90° Corner Angle Fitting, 2 Holes, 2-1/4 in L x 1-5/8 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.36 lb HSI#: FAS50800In stock$8.97$1.82Savings:
- Gregory G-STRUT® GN811 Channel Nut with Short Spring, 3/8-16 Thread, 3/8 in Thick, Steel HSI#: FAS50552In stock$1.42$1.07Savings:
- PHD S6030 EG Post Base, 3-1/2 in Base, For Use with 1-5/8 in Strut, Low Carbon Steel HSI#: S6030 EG-12361In stock$103.46$21.28Savings:
- PHD S5015 EG Splice Plate, 4 Holes, 7-1/4 in L x 1-5/8 in W x 1/4 in Thick, Low Carbon Steel HSI#: FAS50585In stock$18.37$3.67Savings:
- Gregory G-STRUT® G620FL1 Single Post Base, 3-1/2 in Base HSI#: FAS50615In stock$24.20$18.35Savings:
- PHD S1011APG Channel, 1-5/8 in W x 3-1/4 in D x 10 ft L x 12 ga Thick, Carbon Steel, Pre-Galvanized, Domestic HSI#: FAS50557Call for availability$2,127.90$90.22Savings:
- PHD S5550 EG Offset Z-Support, 2 Holes, 3-1/2 in L, Carbon Steel HSI#: S5550 EG-12361In stock$29.82$11.71Savings:
- PHD S5004 EG Square Washer, 3/4 in, 1/4 in Thick, Low Carbon Steel HSI#: S5004 EG-12361In stock$5.60$0.83Savings:
- PHD S3508 EG Combination Nut Washer, 1/2-13, 3/8 in Thick, Low Carbon Steel HSI#: S3508 EG-12361In stock$50.25$19.73Savings:
- PHD S6015 EG Post Base, 1-5/8 in Base, For Use with 1-5/8 in Strut, Low Carbon Steel HSI#: S6015 EG-12361In stock$90.26$35.45Savings:
- PHD S5210 EG 90° Gusseted Corner Connector, 6 Holes, 5-3/8 in L x 3-3/4 in W, Carbon Steel HSI#: S5210 EG-12361In stock$190.19$74.69Savings:



















