Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple, 5/16, 3/8, 1/2 in Staple Length
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Cable Trays & Struts
-
![PHD S6015 EG Post Base, 1-5/8 in Base, For Use with 1-5/8 in Strut, Low Carbon Steel]()
PHD S6015 EG Post Base, 1-5/8 in Base, For Use with 1-5/8 in Strut, Low Carbon Steel HSI#: S6015 EG-12361In stock$29.25$29.25 -
![PHD S5210 EG 90° Gusseted Corner Connector, 6 Holes, 5-3/8 in L x 3-3/4 in W, Carbon Steel]()
PHD S5210 EG 90° Gusseted Corner Connector, 6 Holes, 5-3/8 in L x 3-3/4 in W, Carbon Steel HSI#: S5210 EG-12361In stock$61.64$61.64 -
![PHD S5211 EG 90° Gusseted Corner Connector, 6 Holes, 5-3/8 in L x 3-3/4 in W, Carbon Steel]()
PHD S5211 EG 90° Gusseted Corner Connector, 6 Holes, 5-3/8 in L x 3-3/4 in W, Carbon Steel HSI#: S5211 EG-12361In stock$61.64$61.64 -
![Gregory G-STRUT® GN803 Channel Nut, 1/2-13 Thread, 1/2 in Thick, Steel]()
Gregory G-STRUT® GN803 Channel Nut, 1/2-13 Thread, 1/2 in Thick, Steel HSI#: FAS50556In stock$0.91$0.91 -
![PHD S5371 EG Closed Angle Connector, 4 Holes, 45° Bend, Carbon Steel]()
PHD S5371 EG Closed Angle Connector, 4 Holes, 45° Bend, Carbon Steel HSI#: S5371 EG-12361In stock$8.45$8.45 -
![nVent Caddy® NUT0025EG Strut Nut, 1/4 in Thread, 3:1 Static Load Safety Factor, 6 ft-lb Torque]()
nVent Caddy® NUT0025EG Strut Nut, 1/4 in Thread, 3:1 Static Load Safety Factor, 6 ft-lb Torque HSI#: FAS50546In stock$4.11$4.11 -
![nVent Caddy® F130000EG Flat Square Channel Washer, 1-5/8 in L x 1-5/8 in W Nominal, 3/8 in ID, 1/4 in Thick, Steel]()
nVent Caddy® F130000EG Flat Square Channel Washer, 1-5/8 in L x 1-5/8 in W Nominal, 3/8 in ID, 1/4 in Thick, Steel HSI#: FAS50570In stock$3.94$3.94 -
![PHD S5315 EG Open Angle Connector, 2 Holes, 45° Bend, Carbon Steel]()
PHD S5315 EG Open Angle Connector, 2 Holes, 45° Bend, Carbon Steel HSI#: FAS50605In stock$3.01$3.01 -
![nVent Caddy® SPRC0025EG Strut Nut with Spring, 1/4 in Thread, 3:1 Static Load Safety Factor, 6 ft-lb Torque]()
nVent Caddy® SPRC0025EG Strut Nut with Spring, 1/4 in Thread, 3:1 Static Load Safety Factor, 6 ft-lb Torque HSI#: FAS50547In stock$4.16$1.98Savings: $2.18 (52%) -
![PHD S3506 EG Combination Nut Washer, 3/8-16, 3/8 in Thick, Low Carbon Steel]()
PHD S3506 EG Combination Nut Washer, 3/8-16, 3/8 in Thick, Low Carbon Steel HSI#: S3506 EG-12361Call for availability$14.62$14.62 -
![PHD S4484 PC Safety End Cap, For Use with 1000 and 1100 Series Gauge Channel, Plastic, Powder Coated]()
PHD S4484 PC Safety End Cap, For Use with 1000 and 1100 Series Gauge Channel, Plastic, Powder Coated HSI#: S4484 PC-12361Call for availability$3.07$3.07 -
![PHD S6005 EG Post Base, 1-5/8 in Base, Use with 1-5/8 in Strut, Low Carbon Steel]()
PHD S6005 EG Post Base, 1-5/8 in Base, Use with 1-5/8 in Strut, Low Carbon Steel HSI#: FAS50620Call for availability$18.09$18.09 -
![PHD S5361 EG Closed Angle Connector, 2 Holes, 1-5/8 in W, 45° Bend, Low Carbon Steel]()
PHD S5361 EG Closed Angle Connector, 2 Holes, 1-5/8 in W, 45° Bend, Low Carbon Steel HSI#: FAS50603Call for availability$5.65$5.65 -
![nVent Caddy® SLICK250 Slick Nut, 1/4-20 Thread, 400/100/250 lb Static Load, 4 ft-lb Torque, Polyamide/Spring Steel]()
nVent Caddy® SLICK250 Slick Nut, 1/4-20 Thread, 400/100/250 lb Static Load, 4 ft-lb Torque, Polyamide/Spring Steel HSI#: FAS46316Call for availability$5.12$5.12 -
![nVent Caddy® CSBSH00750EG Strut Seismic Hinge, 7-1/16 in L x 1-5/8 in W x 1/4 in Thick, Steel]()
nVent Caddy® CSBSH00750EG Strut Seismic Hinge, 7-1/16 in L x 1-5/8 in W x 1/4 in Thick, Steel HSI#: CSBSH00750EG-10788Call for availability$35.70$35.70
