DeWALT® 7440SD1-PWR SD1 Expansion Wedge Anchor, 3/4 in dia, 4-1/4 in OAL, 1-3/4 in L Thread, Carbon Steel, Zinc Plated
Manufacturer #7440SD1-PWR
In stock
$3.13
$3.13
Quantity Break Pricing may apply in the cart
HSI
ANC28200
UPC #:075352781136
DeWALT® 7440SD1-PWR SD1 Expansion Wedge Anchor, 3/4 in dia, 4-1/4 in OAL, 1-3/4 in L Thread, Carbon Steel, Zinc Plated is available to buy in increments of 1
Product Overview
DeWALT® wedge anchor, expansion, series: SD1, 3/4 in dia, 4-1/4 in OAL, 1-3/4 in thread L, carbon steel, zinc plated, 3-3/8 in minimum embedment depth, 3/4 in drill, 3/4-10 thread, threaded stud head, UNC thread, 1/8 in maximum work thickness, 12,580 lb shear strength, 9,075 lb tensile strength.
Features
- Consistent performance in high and low strength concrete
- Ultimate load capacity 8,850 lb shear strength when embedded in 1,500 psi, 9,375 lb shear strength when embedded in 2,000 psi at 12 in minimum edge/end distance and 10,200 lb shear strength when embedded in 1,500 psi, 10,800 lb shear strength when embedded in 2,000 psi at 20 in minimum edge/end distance grout-filled concrete masonry wall faces
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5,440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Ultimate load capacity: 7,180 lb tensile strength when embedded in 2,500 psi, 7,860 lb tensile strength when embedded in 3,000 psi and 9,075 lb tensile strength when embedded in 4,000 psi compressive strength concrete
Specifications
| Manufacturer Part Number | 7440SD1-PWR |
|---|---|
| Manufacturer | Stanley Black & Decker |
| Brands | DEWALT |
| UPC | 075352781136 |
| Length (in) | 5.7 |
| Width (in) | 8.6 |
| Height (in) | 3.8 |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade