Dixon® 8P3 Holedall™ Uni-Range Male Coupling, 1/2 in ID x 62/64 to 1-2/64 in OD Nominal, MNPT End Style, Carbon Steel, Domestic

Manufacturer #8P3
In stock
List Price: $24.87
$24.87
Quantity Break Pricing may apply in the cart
HSI
8P3-10639
Product Overview
Dixon® Male Coupling, Uni-Range, Series: Holedall™, Fitting/Connector Type: Coupling, 1/2 in ID x 62/64 to 1-2/64 in OD Nominal, MNPT, 3-7/64 in Length, Carbon Steel, Plated, 1-3/16 in H, Domestic

Features
  • Designed for smaller hose systems, these couplings may be used for hose ID's of 1/4 - 1 in
  • Arrives complete with factory assembled stem and ferrule combination
  • The coupling system requires no bolts and results in a clean coupling with no protrusions
  • The holedall coupling provides long lasting efficiency and safety
  • These fittings can be crimped or swaged
  • Plated carbon steel stem and ferrule
  • Other hose OD's available, contact Dixon
  • Dixon holedall stems and ferrules are specifically designed to be used together as a coupling system
  • Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon holedall products
  • Do not use a wrench or vice on ferrule
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
  • Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
  • Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD
  • Dixon's die and ferrule Recommendation guide is to be used to select correct dies and ferrules
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
  • Media being transported through the hose should be compatible with the stem material
  • Compatibility of ferrule material with the environment in which it will be used is recommended
  • For applications other than the ones list, please consult Dixon
  • Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
  • For use on most one or two wire braid reinforced hoses, fiber reinforced (braided or spiral) with or without helical wire such as chemical, high pressure air and water hoses and lp gas hoses
WARNING: Cancer and Reproductive Harm —
www.p65warnings.ca.gov
WARNING: Cancer and Reproductive Harm —
www.p65warnings.ca.gov

Specifications
More Information
Manufacturer Part Number 8P3
Manufacturer Dixon Valve & Coupling
Brand Name DIXON
Length (in) 3.109
Height (in) 1.187
Inside Diameter 1/2 in
Outside Diameter 62/64 to 1-2/64 in
Domestic/Import Domestic
Fitting/Connector Type Coupling
Type Uni-Range
Finish Plated
Material Carbon Steel
Warnings
  • This product contains a chemical known to the state of California to cause birth defects or other reproductive harm
Package Quantity 1/Each

Reviews
Write Your Own Review
You're reviewing:Dixon® 8P3 Holedall™ Uni-Range Male Coupling, 1/2 in ID x 62/64 to 1-2/64 in OD Nominal, MNPT End Style, Carbon Steel, Domestic