Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 1-1/4 in, 1-19/32 in L x 1-1/4 in W x 1-19/32 in Thick Knurled/Square Steel Jaw, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule w/ BladeArmor®, 16 ft L x 1-1/4 W in Blade, Mylar® Polyester Film Blade
Channellock® 426 Tongue and Groove Plier, 0.87 in, 0.81 in L x 0.47 in Thk Straight C1080 High Carbon Steel Jaw, 6-1/2 in OAL
Estwing® E324S Framing Hammer, 16 In OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pieces
Powers™ Power-Stud+® SD1 7449SD1 Wedge Expansion Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI 777037 All Threaded Rod 3/8-16 x 12 ft Zinc Plated
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated With Yellow Chromate, 5
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, Smooth Shank, 9 ga, Vinyl Coated
BBI 754072 Medium Split Lock Washer, 1/2 In, 18-8 Stainless Steel
WARNING: Cancer and Reproductive Harm —
www.p65warnings.ca.gov
Dixon® GF26 Boss Ground Joint Seal, 3/4 in Nominal, FNPT End Style, Iron/Steel, Domestic
Manufacturer #GF26
Call for availability
List Price:
$48.75
$48.75
Quantity Break Pricing may apply in the cart
HSI
HOS22032
Dixon® GF26 Boss Ground Joint Seal, 3/4 in Nominal, FNPT End Style, Iron/Steel, Domestic
Features
- The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
- Positive metal-to-polymer seal
- Leakproof seal forms when the metal head of the stem makes contact with the patented polymer seat in the spud
- The non-metallic polymer seat resists most chemicals found in manufacturing facilities, reference the corrosion resistance chart for additional information
- Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
- Easy to seal
- Boss couplings are all-purpose hose couplings, universally recommended for steam hose connections, they are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1 in ID
- Boss couplings can be applied to many types of rubber, synthetic, plastic, metallic or semi-metallic hose
- Worn-out hose couplings can be dangerous
- They should be checked regularly and replace when necessary
- Each coupling user should review applications and add safety devices where indicated
- Note: pressurized steam is an extremely dangerous commodity
- Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
- Always follow the manufacturer's product recommendations for pressurized steam handling
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
PRODUCT SPECIFICATIONS
| Manufacturer Part Number | GF26 |
|---|---|
| Manufacturer | Dixon Valve & Coupling |
| Brand Name | DIXON® |
| Width (in) | 3.562 |
| Height (in) | 4.937 |
| Standard Package Quantity | 1/BX |
| Series | Boss™ |
| Domestic/Import | Domestic |
| Temperature Rating | 450°F |
| End Style | FNPT |
| Fitting/Connector Type | Adapter |
| Finish | Plated |
| Material | Iron/Steel |
| Nominal Size | 3/4 in |
| Package Quantity | 1/Each |
| Unit Stock | Each |
Write Your Own Review