Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 1-1/4 in, 1-19/32 in L x 1-1/4 in W x 1-19/32 in Thick Knurled/Square Steel Jaw, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy, Zinc CR+3
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
PrimeSource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
BBI 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 Stainless Steel
WARNING: Cancer and Reproductive Harm —
www.p65warnings.ca.gov
Dixon® RB28 Boss™ Ground Joint Washer Seal Spud, 2 in, Thread Wing Nut x FNPT, 316 Stainless Steel, Domestic
Manufacturer #RB28
In stock
List Price:
$181.90
$181.90
Quantity Break Pricing may apply in the cart
HSI
RB28-10639
Dixon® Ground Joint Washer Seal Spud, Series: Boss™, Fitting/Connector Type: Spud, 2 in Nominal Size, Thread Wing Nut x FNPT, 316 Stainless Steel, Domestic
Features
- The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
- Easy to seal
- Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
- Use with boss washer seal fittings
- A Klingersil C-4401 washer is inserted between the stem and spud
- Recommended for steam service up to 450° F
- Worn-out hose couplings can be dangerous
- They should be checked regularly and replace when necessary
- Each coupling user should review applications and add safety devices where indicated
- Note: pressurized steam is an extremely dangerous commodity
- Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
- Always follow the manufacturer's product recommendations for pressurized steam handling
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
PRODUCT SPECIFICATIONS
| Manufacturer Part Number | RB28 |
|---|---|
| Manufacturer | Dixon Valve & Coupling |
| Brand Name | DIXON® |
| Series | Boss™ |
| Domestic/Import | Domestic |
| End Style | Thread Wing Nut x FNPT |
| Fitting/Connector Type | Spud |
| Material | 316 Stainless Steel |
| Nominal Size | 2 in |
| Package Quantity | 1/Each |
Write Your Own Review