Dixon® RWF51 Boss™ Ground Joint Washer Seal Coupling, 1-1/4 in Nominal, 316 Stainless Steel, Domestic

Manufacturer #RWF51

In stock

List Price: $347.71

$347.71

Quantity Break Pricing may apply in the cart

HSI

RWF51-10639

Dixon® Ground Joint Washer Seal Coupling, Series: Boss™, Coupling Fitting/Connector, 1-1/4 in Nominal, 316 Stainless Steel, Domestic

Features

The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment
The stem part that is clamped to the hose is the other half
The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
Easy to seal
Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
Use with Boss™ clamps
A Klingersil C-4401 washer is inserted between the stem and spud
Recommended for steam service up to 450° F
Worn-out hose couplings can be dangerous
They should be checked regularly and replace when necessary
Each coupling user should review applications and add safety devices where indicated
Note: pressurized steam is an extremely dangerous commodity
Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
Always follow the manufacturer's product recommendations for pressurized steam handling
Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
Do not use in connection with drinking water
Wash hands after handling

WARNING: Cancer and Reproductive Harm —
www.p65warnings.ca.gov

PRODUCT SPECIFICATIONS

Write Your Own Review