Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
WARNING: Cancer and Reproductive Harm —
www.p65warnings.ca.gov
Dixon® TG24 Holedall® Tubular Grooved End Stem, 1-1/2 in Nominal, Hose, Carbon Steel, Domestic
Manufacturer #TG24
Call for availability
List Price:
$51.49
$51.49
Quantity Break Pricing may apply in the cart
HSI
TG24-10639
Dixon® TG24 Holedall® Tubular Grooved End Stem, 1-1/2 in Nominal, Hose, Carbon Steel, Domestic is available to buy in increments of 1
Product Overview
Dixon® Grooved End Stem, Tubular, Series: Holedall®, 1-1/2 in Nominal, Hose, 4-3/4 in Length, 600 psi, Carbon Steel, Plated, Domestic
Features
- The coupling system requires no bolts and results in a clean coupling with no protrusions
- The Holedall coupling provides long-lasting efficiency and safety
- For higher working pressure applications use long style stems and ferrules
- Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system
- Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon Holedall products
- Do not use a wrench or vice on ferrule
- Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
- Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
- Externally swaged Holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD
- Dixon® die and ferrule recommendation guide is to be used to select correct dies and ferrules
- Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
- The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
- Media being transported through the hose should be compatible with the stem material
- Compatibility of ferrule material with the environment in which it will be used is recommended
- For applications other than the ones list, please consult Dixon
- Recommended for use on most one and two wire braid reinforced hoses, fiber reinforced (braided or spiraled) with or without helical wire such as oil and suction discharge hose, barge and dock loading and unloading hose as well as L.P. gas hose, anhydrous ammonia hose, acid chemical hose and air and water hose
Specifications
| Manufacturer Part Number | TG24 |
|---|---|
| Manufacturer | Dixon Valve & Coupling |
| Brand Name | DIXON |
| Length (in) | 4.75 |
| Type | Tubular |
| Warranty | Limited |
| Warnings |
|
| Nominal Size | 1-1/2 in |
| Finish | Plated |
| Domestic/Import | Domestic |
| Material | Carbon Steel |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review