Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Enerpac® WFC112 Cartridge Style Work Support, 0.36 in Stroke Length, 2,500 lb, Hydraulic Advance Function
Manufacturer #WFC112
Call for availability
List Price:
$563.00
$563.00
Quantity Break Pricing may apply in the cart
HSI
WFC112-10764
UPC #:662005129423
Enerpac® WFC112 Cartridge Style Work Support, 0.36 in Stroke Length, 2,500 lb, Hydraulic Advance Function is available to buy in increments of 1
Product Overview
Enerpac® work support, cartridge style, WF series, 0.36 in stroke length, 2,500 lb maximum force, function: hydraulic advance, 60 in³/min maximum oil flow, 4.03 in extended height, 3.67 in retracted height, M42 x 1.5 body thread, M10 x 1.5 plunger thread, 700 to 5,000 psi pressure.
Features
- Plunger stays retracted until pressure is applied allowing unobstructed loading
- Low pressure lockup capability enables the use of machine tool hydraulic systems
- High rated support capacities allow for more compact fixture design
- Corrosion-resistant materials, compatible with most coolants and environments
- Threaded and manifold air vent ports allow fixturing that prevents coolants and debris from being ingested into the mechanism
- Minimized deflection increases machining accuracy
- Multiple mounting configurations for design flexibility
- Support force and clamping force must be matched
- Support force should be at least 150% of clamping force
- Do not exceed maximum flow rates to avoid premature lockup
- Always center load over work support
- Enerpac® work supports provide either additional non-fixed location points to the clamps or support to larger or thin section workpiece components, always in order to minimize workpiece deflection during machining
Specifications
| Manufacturer Part Number | WFC112 |
|---|---|
| Manufacturer | Enerpac Tool Group |
| Brand Name | ENERPAC |
| UPC | 662005129423 |
| Length (in) | 5 |
| Width (in) | 6 |
| Height (in) | 4 |
| Warranty | Limited |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review