JET® 104044 Trademaster® 1-Phase Electric Chain Hoist, 2 ton Load, 10 ft H Lifting, 1.33 hp Power Rating, 120 V
Manufacturer #104044
Call for availability
$10,201.27
$10,201.27
Quantity Break Pricing may apply in the cart
HSI
104044-13455
UPC #:731325854565
JET® 104044 Trademaster® 1-Phase Electric Chain Hoist, 2 ton Load, 10 ft H Lifting, 1.33 hp Power Rating, 120 V is available to buy in increments of 1
Product Overview
JET® Electric Chain Hoist, 1-Phase, Series: Trademaster®, 2 ton Load, 10 ft Lifting Height, 0 to 2.2/9 FPM Lift, Electronic Control, Mechanical Brake, 1.33 hp Power, 120 V, 15 A, 24-1/2 in Headroom, 127 lb Weight, 14-1/2 in W Dimensions
Features
- Comes standard with wireless controller that can infinitely adjust speed from creep to 4 FPM with speed dial and max of 41 FPM in high speed
- Single phase 120 V plug enables use in all areas and the permanent magnet brushless motor has the lowest required starting current available at just 10 A
- Overload protection using slip clutch system to protect hoist from loads over rated capacities
- DC brushless motor designed for a longer lifespan than normal electric hoist motors reducing maintenance costs
- 30/7.5 time ratings
- Electronic controls have protections on them with 10 failure codes that are shown on wireless pendant for troubleshooting
Specifications
| Manufacturer Part Number | 104044 |
|---|---|
| Manufacturer | JPW Industries, Inc |
| Brands | JET |
| UPC | 731325854565 |
| Length (in) | 26.8 |
| Width (in) | 19.7 |
| Height (in) | 23.6 |
| Series | Trademaster® |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade