Green Envy 730G1 Paint Thinner, 1 gal
Manufacturer #730G1
In stock
$23.57
$23.57
Quantity Break Pricing may apply in the cart
HSI
OIL15507
UPC #:076542002314
Green Envy 730G1 Paint Thinner, 1 gal is available to buy in increments of 1
Product Overview
A completely different and brand new technology, Green Envy is water-based and has special solvents with emulsifying agents that make it compatible with both oil-based and latex paints. Not recommended for thinning polyurethanes or clear finishes. It is ultra-low in VOC content, only 19g/L, yet it effectively thins most paints, stains, and varnishes. Provides cleaner air, healthier living with reduced toxins, safer use with less flammability. May be harmful to plastics, linoleum, tile, and other synthetic surfaces if left on for extended time. Ideal for thinning oil and latex paints, cleaning brushes and surfaces, and degreasing.
Features
- Application Method: Brush, Cloth, Roller
- Green Environmental Attribute: Meets SCAQMD Requirements
- VOC Content Weight Percentage: 1.9 %
- Contains: Dipropylene Glycol Monomethyl Ether, Naphtha, P-Chloro-A,A,A-Trifluorotoluene, Sodium Dioctyl Sulfosuccinate
Specifications
| Manufacturer Part Number | 730G1 |
|---|---|
| Manufacturer | Sunnyside Corporation |
| Brands | GREEN ENVY |
| UPC | 076542002314 |
| Length (in) | 7.5 |
| Width (in) | 4 |
| Height (in) | 11.8 |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrowâ„¢ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade