TPI F3316TSRPW 3310 1-Phase Fan Forced Heater with In-Built Single Pole Thermostat and Summer Fan Switch, 4 kW, 208 VAC
Manufacturer #F3316TSRPW
Call for availability
$842.00
$842.00
Quantity Break Pricing may apply in the cart
HSI
F3316TSRPW-13251
UPC #:686334384025
TPI F3316TSRPW 3310 1-Phase Fan Forced Heater with In-Built Single Pole Thermostat and Summer Fan Switch, 4 kW, 208 VAC is available to buy in increments of 1
Product Overview
TPI Fan Forced Wall Heater, 1-Phase Standard, Series: 3310, 13648 Btu, 208 VAC, 19.2 A, 4000 W, 175 cfm, 600 rpm, 90° F, Wall Mount, Steel, White, Powder Coated, 19-15/16 in H x 14-3/16 in W x 4 in D.
Features
- Powder coated 18 ga steel front
- Automatic reset thermal limit for safety
- Steel block fin element
- Units with dual wattage, factory wired to highest wattage
- Wattage selectable at time of installation on some models
- Furnish and install electric forced air heaters where specified
- The heaters shall be constructed of a heavy gauge steel housing
- The heaters shall have a low speed 600 rpm motor which drives a vane axial blower to deliver a quiet 175 cfm of down flow air
- The heating element shall be of the sealed block fin type with large, parallel steel fins for quick heat transfer
- Unit shall have a standard thermal overload cutoff for added safety, a fan switch for fan only operation
- The in-built thermostat shall be calibrated to provide a range of 0 to 110° F
Specifications
| Manufacturer Part Number | F3316TSRPW |
|---|---|
| Manufacturer | TPI Corporation |
| Brands | TPI |
| UPC | 686334384025 |
| Length (in) | 21 |
| Width (in) | 17 |
| Height (in) | 6 |
| Standard Approvals |
|
| Warranty | 1 year limited |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrowâ„¢ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade