Chain Grades Explained

different types of lifting chains

Not all chains are built for the same job. While many chain types may look similar at first glance, their materials, heat treatment, strength, and intended applications can differ significantly. Selecting the proper chain grade is critical for safety and performance, especially in lifting and rigging applications, where using the wrong chain can cause equipment damage, load failure, or serious injury.

Chain grades classify chains based on their mechanical properties and intended use. Lower-grade carbon steel chains are commonly used for general utility work, agriculture, and cargo securement, whereas alloy lifting chains are engineered and tested for overhead lifting and demanding industrial environments.

This comparison examines the most common chain grades used across industries, explains where each grade excels, and highlights the key differences to consider when selecting chain for lifting, transport, or general service.

What Do Chain Grades Mean?

A chain grade is a standardized classification that indicates a chain's strength and mechanical properties. Grades are assigned based on the steel used, the manufacturing process, heat treatment, and the chain's minimum tensile strength.

In general, higher chain grades offer greater strength and improved performance. However, a higher grade is not automatically the best choice for every application. Each grade is designed for specific uses, and selecting the right chain depends on factors such as:

•  Required working load limit
•  Whether the chain will be used for overhead lifting
•  Exposure to shock loading
•  Environmental conditions
•  Applicable OSHA and ASME requirements

For example, the Grade 70 transport chain is significantly stronger than the Grade 43 chain, yet it is not approved for overhead lifting. Conversely, Grade 80 chain was developed specifically for lifting applications and remains one of the most widely used alloy chains in the rigging industry.

How Chain Grades Are Determined

Chain grades are determined by a combination of material selection, manufacturing processes, and mechanical testing.

Several factors influence a chain's grade.

•  Steel chemistry
•  Heat treatment process
•  Proof testing
•  Tensile strength
•  Elongation characteristics
•  Manufacturing quality standards

Higher-grade lifting chains are typically manufactured from quenched and tempered alloy steel, offering greater strength, improved fatigue resistance, and better ductility than standard carbon-steel chains.

Reputable manufacturers permanently mark lifting chains with both the chain grade and the manufacturer's identification, enabling proper inspection and traceability throughout the chain's service life.

Chain Grade Comparison Chart

Chain Grade Material Common Applications Overhead Lifting
Grade 30 Carbon Steel Utility, farm, barriers, general purpose No
Grade 43 High Test Carbon Steel Agriculture, towing, logging, industrial utility No
Grade 70 Heat Treated Carbon Steel Cargo securement, transport, recovery No
Grade 80 Alloy Steel Chain slings, cranes, hoists, overhead lifting Yes
Grade 100 Premium Alloy Steel Heavy lifting, fabrication, manufacturing Yes
Grade 120 Advanced Alloy Steel High-capacity lifting with reduced weight Yes



Grade 30 Chain

Grade 30, commonly known as proof coil chain, is a low-carbon steel chain designed for general-purpose applications that do not require high strength.

Common applications include:

•  Farm equipment
•  Property barriers
•  Light-duty towing
•  Gates
•  Landscaping
•  General utility work

Because Grade 30 chain is not heat-treated for lifting service, it should never be used for overhead lifting or be incorporated into chain slings.

Its primary advantages are affordability and versatility for non-critical applications.

Grade 43 Chain

Grade 43, often called High Test chain, offers greater strength than Grade 30 while remaining a carbon-steel chain.

It is commonly used in:

•  Agriculture
•  Logging
•  Marine applications
•  Equipment towing
•  Industrial utility work

Grade 43 provides improved working load limits compared with proof coil chain, without the added cost of alloy chain.

Although substantially stronger than Grade 30, Grade 43 is not manufactured for overhead lifting and should never be used as a lifting chain.

Grade 70 Chain

Grade 70 transport chain is one of the most widely recognized chain grades in the transportation industry.

Manufactured from heat-treated carbon steel, Grade 70 offers high strength while remaining relatively lightweight, making it ideal for securing loads during transport.

Typical applications include:

•  Flatbed trailers
•  Heavy equipment transport
•  DOT cargo securement
•  Vehicle recovery
•  Construction equipment

Many Grade 70 chains have a gold chromate finish, but the finish color alone should never be relied on to identify a chain's grade.

One of the most common misconceptions in the industry is that Grade 70, because it is stronger than lower-carbon steel grades, is suitable for lifting. It is not.

Despite its impressive strength, Grade 70 chain is not approved for overhead lifting and should never be used in chain-sling assemblies or in crane rigging.

Grade 80 Chain

Grade 80 is the first alloy chain engineered specifically for overhead lifting.

Manufactured from quenched and tempered alloy steel, Grade 80 chain combines high strength with excellent ductility and fatigue resistance. Rather than failing suddenly under overload, properly manufactured alloy chain is designed to show visible deformation, providing an additional margin of safety during inspection.

Common applications include:

•  Chain slings
•  Overhead cranes
•   Hoists
•  Manufacturing facilities
•  Steel fabrication
•  Industrial maintenance

Grade 80 remains one of the most widely specified lifting chains because it offers an excellent balance of strength, durability, availability, and cost-effectiveness.

Grade 100 Chain

Grade 100 chain builds on Grade 80's performance, providing approximately 25 percent higher working load capacity at the same chain diameter.

This increased strength enables rigging professionals to:

•  Reduce overall sling weight
•  Use a smaller-diameter chain for comparable capacities
•  Improve handling during frequent rigging operations
•  Increase lifting efficiency

Grade 100 is commonly selected in:

•  Steel mills
•  Heavy manufacturing
•  Fabrication facilities
•  Shipyards
•  Energy projects
•  Industrial construction

Although it typically costs more upfront than Grade 80, many operations find the improved strength-to-weight ratio worthwhile, especially when rigging is performed repeatedly throughout the day.

Grade 120 Chain

Grade 120 is currently one of the highest-strength chain grades available for overhead lifting applications.

Its exceptional strength enables lifting assemblies to achieve higher capacities while reducing sling weight, an advantage for crews handling large slings during long shifts.

Typical applications include:

•  Heavy industrial lifting
•  Large manufacturing facilities
•  Wind energy
•  Mining
•  Specialized lifting operations

Because of its premium materials and manufacturing requirements, Grade 120 is typically reserved for operations where reducing sling weight or maximizing lifting capacity yields measurable operational benefits.

Which Chain Grades Can Be Used for Overhead Lifting?

Only alloy lifting chains specifically designed for overhead lifting should be used in crane and rigging operations.

Approved lifting grades include:

•  Grade 80
•  Grade 100
•  Grade 120

These chains are engineered to withstand the dynamic forces encountered during lifting operations, including repeated loading cycles and possible shock loads.

The following grades should never be used for overhead lifting:

•  Grade 30
•  Grade 43
•  Grade 70

While these chains serve important purposes in transportation and general utility applications, they lack the material properties and manufacturing requirements for safe overhead lifting.

Chain Grade Versus Working Load Limit

One of the most common misconceptions is that chain grade alone determines a chain's lifting capacity.

In practice, the Working Load Limit (WLL) depends on both the chain grade and its diameter.

For example, a larger Grade 80 chain may have a higher WLL than a smaller Grade 100 chain, even though Grade 100 material is stronger.

Always consult the manufacturer's published working load limits when selecting chain for lifting applications. Never estimate capacity based solely on chain grade or appearance.

Identifying Chain Grades

Proper identification is essential during inspections and before the chain is placed into service.

Most quality chains are permanently marked as follows:

•  Chain grade
•  Manufacturer's identification
•  Traceability markings

It is equally important to understand what does not determine a chain's grade.

Do not rely on:

•  Color
•  Surface finish
•  Paint
•  Coating
•  General appearance

For example, although many Grade 70 transport chains feature a gold finish, finish colors vary by manufacturer and should never be used as the sole means of identification.

Selecting the Appropriate Chain Grade

Choosing the right chain starts with understanding the intended application.

For general utility work, Grade 30 remains an economical choice.

Agricultural and industrial utility applications often benefit from Grade 43's increased strength.

Cargo securement and transportation require a Grade 70 transport chain meeting applicable securement requirements.

For any overhead lifting application, Grade 80 is generally the minimum acceptable lifting chain, while Grades 100 and 120 provide higher capacities and improved strength-to-weight ratios for demanding industrial operations.

Selecting the appropriate chain also requires evaluating working load limits, environmental conditions, inspection requirements, and compatibility with hooks, master links, and other lifting components.

Common Mistakes When Choosing Chain Grades

Even experienced users occasionally encounter chain-selection errors. Some of the most common errors include:

•  Using a Grade 70 transport chain for overhead lifting
•  Assuming a higher grade automatically means higher lifting capacity, regardless of diameter
•  Mixing components of different chain grades
•  Selecting a chain based solely on price
•  Ignoring inspection requirements or visible wear
•  Attempting to identify the chain by color rather than stamped markings

Proper chain selection should always consider the entire lifting assembly, not just the chain.

Quality Chain Products for Industrial Applications

Whether you're assembling chain slings, securing heavy equipment for transport, or replacing worn rigging components, selecting the appropriate chain grade is essential for safe, efficient operation. Understanding the differences among Grades 30, 43, 70, 80, 100, and 120 helps ensure that the chain you choose meets the application's demands and complies with applicable industry standards.

Hanes Supply offers a comprehensive selection of industrial and lifting chains, chain slings, hooks, and rigging hardware from trusted manufacturers. Whether you need a transport chain for cargo securement or an alloy chain for overhead lifting, our experienced team can help you choose the right products for your lifting and rigging needs.

Share:

Comments (0)

No comments.