Hanes Supply

When Is Fall Protection Required?

worker using fall protection equipment at height

Fall Protection, General Requirements (29 CFR 1926.501) has been OSHA's #1 most frequently cited standard for more than a decade, and falls remain the leading cause of death in construction. Most of those citations stem from a single failure: not knowing which height threshold applies to the work. That threshold isn't a single number; it varies by industry and task, and, in a few cases, by what's directly below the worker.

Read More

304 vs 316 Stainless Steel Wire

coiled stainless steel wire rope

Choosing between 304 and 316 stainless steel wire requires more than comparing price or corrosion resistance. Match the alloy, rope construction, and rated capacity to your application. Learn when 304 makes sense, when 316 is worth the added cost, and why marine-grade stainless can still corrode. You’ll also see how breaking strength differs from working load limits, what to check when selecting fittings, and how to verify the stainless grade. Use the comparison and ordering checklist to ask better questions, avoid unsuitable substitutions, and specify the right wire rope for your job.

Read More

Chain Grades Explained

different types of lifting chains

Choosing the right chain starts with understanding the differences among chain grades. In this article, you'll compare Grade 30, 43, 70, 80, 100, and 120 chains, including their strength, common applications, and suitability for overhead lifting. You'll also learn how chain grades affect working load limits, how to identify chain correctly, and what mistakes to avoid when selecting chain for lifting, cargo securement, or general industrial use. With this knowledge, you'll be better equipped to choose the right chain for your application.

Read More

Do Lifting Chains Need to Be Certified?

lifting hook and chain for rigging

If you're using alloy chain slings for overhead lifting, understanding certification requirements is essential to maintaining safety and OSHA compliance. Learn what "certified" means, when proof testing is required, how inspections differ from certification, and which chain grades are approved for overhead lifting. You'll also learn when to remove a chain sling from service and what to look for when selecting lifting chains that deliver reliable performance on every lift.

Read More

Lifting vs Rigging Equipment

chain hoists used for heavy lifting
Learn the differences between lifting and rigging equipment, common applications, WLL, OSHA standards, and how to select the right gear. When planning a lift, understanding the difference between lifting and rigging equipment is critical to safety, efficiency, and proper load control. In this post, you will learn how cranes, hoists, slings, shackles, hooks, and below-the-hook devices work together during lifting operations. You will also explore common applications across construction, manufacturing, utilities, and industrial environments, and learn about working load limits, sling angles, inspections, OSHA requirements, and key considerations for choosing the right equipment for the job.

Read More

What Does a Spreader Bar Do?

crane using spreader bar

You rely on precise load control during demanding lifts, and understanding how a spreader bar works helps you do so safely. This post explains how spreader bars distribute weight, reduce sling stress, and prevent load damage. You’ll learn the key differences from lifting beams, common configurations, and how to choose the right setup for your job. With clear insight into safety standards, inspection practices, and real-world applications, you can plan lifts with greater confidence and efficiency.

Read More

What Is a Self-Retracting Lifeline? Types, Uses, OSHA Rules

construction worker wearing safety harness

Learn what self-retracting lifelines (SRLs) are, how they work, and why they’re vital for fall protection. This article explains the different types of SRLs, where they are used, and the OSHA rules that cover them. Whether you work in construction, utilities, or general industry, you’ll gain practical insights on how to properly use SRLs, reduce fall risks, and improve overall jobsite safety with the right equipment.

Read More

What Are the Major Types of Rigging?

crane lifting heavy equipment

Discover and break down the major types of rigging used in construction and industrial lifting. You’ll understand the differences among wire rope, chain, and synthetic slings, how rigging hardware and lifting devices work together, and how hitch configurations affect load capacity. This overview helps you choose the right equipment, strengthen lift planning, and stay compliant on demanding jobsites.

Read More

Rigging Equipment Load Testing Guide

crane load testing using rigging equipment

Rigging equipment load testing is a critical step in ensuring your lifting gear performs safely under real-world conditions. You rely on slings, hoists, hooks, and custom lifting devices to handle heavy loads, and load testing verifies that the equipment can support its rated capacity without failure. By understanding when load testing is required, how proof tests are performed, and how results are documented, you reduce risk, support compliance, and protect your crew. Professional load testing gives you confidence that every lift is backed by verified performance and proper certification.

Read More

Choosing the Proper Wire Rope Cable Clamp for Rigging

wire rope secured using wire rope clamp
When assembling wire rope terminations, selecting the appropriate cable clamp is essential to maintain strength and safety. In this guide, you’ll learn how different clamp types perform, which materials withstand demanding environments best, and how to match each clamp to the load and application. You’ll also see how proper installation—spacing, torque, and inspection—directly impacts holding strength. By applying these principles, you can create secure, reliable wire rope connections on any jobsite.

Read More