The store will not work correctly in the case when cookies are disabled.
The browser you are using is not compatible with our site. For a better experience on our website please use one of these browsers: Google Chrome | Microsoft Edge | Mozilla Firefox | Apple Safari Update Browser
The M12 Fuel Digital Torque Wrench outperforms traditional torque wrenches with not only faster installation speeds, but a larger reduction in user fatigue and repetitive motion injuries. This tool not only gets rid of the need for multiple tools, it gets rid of the chance to over-torque. The M12 Fuel Digital Torque Wrench delivers torque accuracy up to +- 2% CW.
Ear protection is part of the daily uniform for many jobs in construction and industry. Working in a loud environment is risky for the health of your ears, especially for workers who are exposed to noise hazards regularly for long periods of time.
Big construction needs big bolts: much of our world, from bridges to skyscrapers, is held together by bolts upwards of 1 inch in diameter.
Driving bolts of that size takes a tool with serious power. Until now, workers have relied on corded impact wrenches to get the job done, which are heavy, cumbersome, and tethered to extension cords, compressors, and generators.
More than 100 people die from ladder-related accidents every year, and thousands more suffer disabling injuries. Using a ladder isn’t inherently dangerous – when ladders are in working condition, set up correctly, and used by a person with proper training, they're a safe and essential part of any construction site or home toolbox. So why do so many ladder related injuries and fatalities continue to occur?
Across construction, industrial, gas, and oil industries, there’s one essential tool that every worker uses every day – their hands. Although the human hand is an incredible tool, it’s also a delicate one – the bones and tissues in the back of the hand are vulnerable to work related injuries ranging from bumps and bruises to breaks and crushes.
Ask just about anyone what a rigging hook looks like, and they'll probably describe a shiny red hook with a classic logo embossed in all caps. The image of a Crosby® hook is nearly synonymous with heavy lifting and rigging, and with good reason -- Crosby® has been one of the world’s leading manufacturers of rigging and lifting products since they were founded in 1836.
In December of 2008, Hanes Supply, Inc. held our Annual Kent Hull Hard Working Man Award Dinner, honoring Thurman Thomas. All who attended enjoyed their time to share some Holiday Cheer and a wonderful dinner.
The Niagara Falls attraction the Maid of the Mist was welcomed to its new home on Thursday, October 31st 2013. The two tour boats, weighing approximately 125 tons each, needed to be lifted onto the new concrete slab that was built on the American side of the Niagara River for storage during the winter months.
Hanes Supply, Inc and Engineered Lifting Technologies received a request from a customer to work with them on a complicated lift plan with an aggressive delivery schedule. The customer wanted to lift a 59 ft diameter rebar mat design weighing approximately 90,000 lb each in a single pick. The three rebar mats made of # 8 and # 14 rebar (hand tied) were designed to plug 3 different 60’diameter shafts with a 1500CY concrete tremie pour at the bottom of a 120 ft deep shaft filled with water.
Hanes Supply’s wire rope and 16 Crosby 2 inch G-450 wire rope clips, to secure the tight rope cable, were used for Nik Wallenda “King of the High Wire” at the Niagara Falls casino as he practiced for his “Wallenda Walk Over The Falls” on June 15th 2012.
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
