Do Lifting Chains Need to Be Certified?
- By Hanes Supply
- May 5, 2026
- 0 Comments
When lifting heavy loads overhead, there is no room for uncertainty. Whether you're working in construction, manufacturing, steel fabrication, or industrial maintenance, using the proper lifting chain is essential for safety and compliance. One of the most common questions among contractors and safety professionals is whether lifting chains need to be certified.
The short answer is yes—but "certification" doesn't always mean what people think it does. OSHA requires that alloy chain slings used for overhead lifting be proof-tested before initial use, permanently marked with specific information, and inspected regularly throughout their service life. Understanding these requirements helps ensure your lifting equipment remains compliant, safe, and ready for the job.
The Short Answer: Do Lifting Chains Need Certification?
For overhead lifting applications, alloy chain slings should be supplied with documentation showing they have been proof-tested and manufactured in accordance with applicable industry standards. While OSHA regulations focus on proof testing, identification, and inspections rather than using the word "certified" throughout the standard, many manufacturers and distributors refer to the accompanying documentation as a certification or certificate of proof test.
It's also important to distinguish between bulk chain and a finished chain sling. A length of chain by itself is not the same as a completed overhead lifting assembly. A properly manufactured chain sling includes alloy chain, master links, hooks, coupling links, identification tags, and proof testing before it is placed into service.
What Does "Certified" Mean?
The term certified is often used broadly in the lifting industry, but several documents may accompany a chain sling.
Depending on the manufacturer, you may receive:
• A proof test certificate confirming the sling was successfully tested before shipment.
• A certificate of conformance stating that the sling was manufactured to the applicable specifications.
• Material documentation for the alloy chain or its components.
• Working Load Limit (WLL) information and product identification.
For most users, the most important document is the proof test record, which shows that the completed sling was tested before its initial use.
OSHA Requirements for Overhead Chain Slings
OSHA's regulations for alloy steel chain slings set forth several requirements intended to protect workers during overhead lifting operations.
Proof Testing
Before a new alloy chain sling is put into service, it must be proof-tested by the manufacturer or an equivalent qualified entity. Proof testing confirms that the completed sling assembly—including the chain and all attached components—can safely withstand a specified test load without damage or permanent deformation.
If a chain sling is repaired, it must be proof-tested again before it is returned to service.
Permanent Identification
Every alloy chain sling used for overhead lifting should have a durable identification tag that includes critical information such as:
• Manufacturer's name or trademark
• Chain size
• Chain grade
• Number of sling legs (when applicable)
• Reach
• Rated Working Load Limit (WLL)
If the identification tag is missing or no longer legible, the sling should be taken out of service until it can be properly identified or replaced.
Regular Inspections
Certification alone does not make a chain sling safe forever. OSHA requires chain slings to be inspected before use, with periodic documented inspections by a qualified person based on the sling's service conditions.
Inspectors should check for:
• Bent or twisted chain links
• Cracked or gouged components
• Excessive wear
• Stretching or elongation
• Damaged hooks
• Missing or defective hook latches
• Heat damage
• Corrosion that affects strength
• Missing identification tags
Any sling showing signs of conditions that could reduce its strength or reliability should be removed from service immediately.
OSHA vs. ASME: Understanding the Difference
OSHA regulations set the minimum legal requirements for workplace safety in the United States. For chain slings, these requirements cover proof testing, identification, inspections, and removal from service.
The ASME B30.9 Slings standard expands on these requirements by providing detailed guidance on the design, fabrication, use, inspection, maintenance, and repair of lifting slings. While OSHA regulations are legally enforceable, ASME standards are widely recognized as industry best practices and are commonly followed by manufacturers, inspectors, and employers.
Together, OSHA and ASME provide the framework for the safe use of alloy chain slings in overhead lifting applications.
Proof Testing vs. Inspection
One of the biggest misconceptions in the lifting industry is that proof testing replaces inspections. In reality, they are two distinct processes that serve different purposes.
Proof testing is performed before the sling enters service and again after qualifying repairs to verify that the assembled sling can safely withstand the required test load.
Inspections are conducted throughout the sling's service life to identify wear, damage, or other conditions that could make continued use unsafe.
A chain sling that passed proof testing years ago can still become unsafe if it develops excessive wear, damaged hooks, stretched links, or missing identification.
Choosing the Right Chain for Overhead Lifting
Not every chain is designed for overhead lifting. This is an important distinction because chain intended for cargo securement or towing may look similar but is manufactured for an entirely different purpose.
For overhead lifting, alloy chain is the standard choice. Common options are:
• Grade 80 Chain – A proven, durable alloy chain widely used for general overhead lifting.
• Grade 100 Chain – Offers higher Working Load Limits than Grade 80 while maintaining similar chain dimensions, making it an excellent choice when higher lifting capacities are required.
• Grade 120 Chain – Used in specialized applications where maximum strength and reduced weight are desired.
By comparison, Grade 70 transport chain is designed primarily for load securement during transport and should not be used for overhead lifting.
Selecting the proper chain grade is just as important as selecting the correct sling configuration and Working Load Limit.
When Should a Chain Sling Be Removed from Service?
Even properly certified and proof-tested chain slings eventually wear out or become damaged. Continuing to use a compromised sling can significantly increase the risk of equipment failure.
A chain sling should generally be taken out of service if it exhibits:
• Excessive wear
• Stretched or elongated links
• Cracked, bent, or twisted chain links
• Heat damage from welding or excessive temperatures
• Deep nicks, gouges, or corrosion
• Damaged hooks or safety latches
• Missing or illegible identification tags
• Unauthorized repairs or modifications
Routine inspections help identify these conditions before they become serious safety hazards.
Why Buy Chain Slings from Hanes Supply?
When worker safety depends on every lift, choosing quality lifting equipment is critical. Hanes Supply offers professionally assembled alloy chain slings for demanding overhead lifting applications. Our selection includes Grade 80 and Grade 100 chain slings, adjustable chain slings, master links, hooks, coupling links, and replacement components from trusted manufacturers.
Whether you're replacing an existing sling or specifying equipment for a new project, our experienced team can help you select the right sling configuration, Working Load Limit, and components for your application. We are committed to providing lifting equipment that meets applicable OSHA and ASME requirements, giving you confidence that your equipment is built for safe, reliable performance.
The Importance of Certified Lifting Equipment
Do lifting chains need to be certified? For overhead lifting, the answer is effectively yes. New alloy chain slings should be proof-tested before first use, permanently identified, and regularly inspected throughout their service life. While the term "certification" can refer to several documents, the goal is always the same: to ensure the sling has been properly manufactured, tested, identified, and maintained for safe lifting.
Understanding the differences among proof testing, inspections, chain grades, and OSHA requirements helps reduce risk and ensure compliance at every job site. Investing in quality lifting equipment—and inspecting it regularly—is one of the best ways to protect both your workers and your loads.
Comments (0)