Dixon® FL48-4 Holedall™ Long External Swage Ferrule, 3 in ID x 3-57/64 to 4 in OD Nominal, Carbon Steel, Hose End Style, 6-1/16 in L, Domestic

Manufacturer #FL48-4
In stock
List Price: $98.74
$98.74
Quantity Break Pricing may apply in the cart
HSI
FL48-4-10639
UPC #:089109759675
Dixon® External Swage Ferrule, Long, Series: Holedall™, 3 in ID x 3-57/64 to 4 in OD Nominal, Hose, 6-1/16 in Length, Carbon Steel, Plated, 4-1/2 in dia, Domestic
Features
  • The coupling system requires no bolts and results in a clean coupling with no protrusions
  • The holedall coupling provides long lasting efficiency and safety
  • Style FL ferrules are extra long and are used with all long style external swage stems - TML, TGL and TPL styles
  • The selection of ferrules is very important to achieve proper coupling-to-hose assembly
  • Dixon®holedall stems and ferrules are specifically designed to be used together as a coupling system
  • Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon®holedall products
  • Do not use a wrench or vice on ferrule
  • The selection of ferrules is very important to achieve the proper coupling-to-hose assembly
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
  • Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
  • Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon®s assembly procedures, using correct die and ferrule for that particular hose end OD
  • Dixon®s die and ferrule recommendation guide is to be used to select correct dies and ferrules
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
  • Media being transported through the hose should be compatible with the stem material
  • Compatibility of ferrule material with the environment in which it will be used is recommended
  • Do not use in connection with drinking water
  • Wash hands after handling
WARNING: Cancer and Reproductive Harm —
www.p65warnings.ca.gov
WARNING: Cancer and Reproductive Harm —
www.p65warnings.ca.gov
PRODUCT SPECIFICATIONS
More Information
Manufacturer Part Number FL48-4
Manufacturer Dixon Valve & Coupling
Brand Name DIXON®
UPC 089109759675
Length (in) 6.062
Width (in) 4.5
Diameter 4-1/2 in
Inside Diameter 3 in
Outside Diameter 3-57/64 to 4 in
Series Holedall™
Domestic/Import Domestic
End Style Hose
Type Long
Finish Plated
Material Carbon Steel
Package Quantity 1/Each
Write Your Own Review
You're reviewing:Dixon® FL48-4 Holedall™ Long External Swage Ferrule, 3 in ID x 3-57/64 to 4 in OD Nominal, Carbon Steel, Hose End Style, 6-1/16 in L, Domestic