Greenlee® CMI-1000 Standard Clamp Meter, 60/600/1000 A at 600/1000V AC/DC, 600 Ohm/6/60 kOhm, 40/50 Hz, 2 in Jaw, LCD Display
Manufacturer #CMI-1000
Call for availability
$473.67
$473.67
Quantity Break Pricing may apply in the cart
HSI
CMI-1000-11113
UPC #:783310021872
Greenlee® CMI-1000 Standard Clamp Meter, 60/600/1000 A at 600/1000V AC/DC, 600 Ohm/6/60 kOhm, 40/50 Hz, 2 in Jaw, LCD Display is available to buy in increments of 1
Product Overview
Greenlee® clamp meter, standard, 60/600/1000 A at 600/1000V AC/DC, 600 Ohm/6/60 kOhm, 40/50 hz, 2 in jaw, counts: 6,000, LCD, true RMS AC response, +/-1.5% + 0.15 A at 0 to 3.99 A, +/-1.5% + 0.05 A at 4 to 60 A accuracy, +/-1.8% + 0.7 VDC at 600V AC, +/-1.8% + 7 VDC at 1000V AC accuracy, safety rating: cat III 1000 V/cat IV 600V, 1.5V AA battery, 14 to 122°F operating, 10.1 in L x 3.7 in W x 1.7 in D.
Features
- Measures AC+DC current and DC micro amps
- AC and AC+DC voltage measurements with digital low pass filter for accurate readings on variable frequency drives
- Also measures DC voltage, resistance, capacitance, temperature and frequency
- Tests continuity and diodes
- Phase sequence and motor rotation tests
- Peak-RMS measures motor in rush current
- Flashlight inside clamp jaw for easier work in dark locations
- Backlight and relative mode for added versatility
- Amptip™ increases accuracy on small wires and low current
- Two voltage detection modes - non-contact or using a single test lead
- Data hold
- Recording of maximum, minimum and average readings
- Crest (peak hold) feature captures current or voltage peaks as short as 5 milliseconds
- Digits 3-5/6
- Automatic polarity
- Pollution 2°
Specifications
| Manufacturer Part Number | CMI-1000 |
|---|---|
| Manufacturer | Emerson Electric |
| Brands | GREENLEE |
| UPC | 783310021872 |
| Length (in) | 6 |
| Width (in) | 14 |
| Height (in) | 3 |
| Standard Approvals |
|
| Includes | (2) Batteries, (1) 02714 Test Leads With Clips and (1) TC-30 Carrying Case |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade