Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
-
![General® 729 Slide Caliper, 0 to 4 in Measuring, Graduations 1/16 in, 1/32 in, Steel, Polished SS]()
General® 729 Slide Caliper, 0 to 4 in Measuring, Graduations 1/16 in, 1/32 in, Steel, Polished SS HSI#: THA24840Call for availability$13.83$13.83 -
![Greenlee® CS-8000 Circuit Seeker™ Circuit Tracer, 6.5 km, LCD Display, 1.5 VDC AA Battery]()
Greenlee® CS-8000 Circuit Seeker™ Circuit Tracer, 6.5 km, LCD Display, 1.5 VDC AA Battery HSI#: CS-8000Call for availability$1,184.74$1,184.74 -
![General® 444 Depth/Angle Gage, SS Rule/Hardened Steel Base]()
General® 444 Depth/Angle Gage, SS Rule/Hardened Steel Base HSI#: THA24730Call for availability$19.57$19.57 -
![Klein® 69105 Circuit Tester with Probe, 80 to 600 VAC/VDC]()
Klein® 69105 Circuit Tester with Probe, 80 to 600 VAC/VDC HSI#: THA40505Call for availability$39.95$39.95 -
![Greenlee® GT-10 GFI Polarity Cube Circuit Tester, 120 VAC, Mains, 6.4 in L x 3-1/2 in W]()
Greenlee® GT-10 GFI Polarity Cube Circuit Tester, 120 VAC, Mains, 6.4 in L x 3-1/2 in W HSI#: TEM25581Call for availability$13.70$13.70 -
![Greenlee® GT-10GFI, 3-Wire GFCI Circuit Tester, 120 VAC]()
Greenlee® GT-10GFI, 3-Wire GFCI Circuit Tester, 120 VAC HSI#: TEM25582Call for availability$23.51$23.51 -
![Milwaukee® 2210-20 Lamp and Ballast Tester Kit, Electronic, T2 to T12 Fluorescent, Bi-Pin Lamp, AA Alkaline Battery]()
Milwaukee® 2210-20 Lamp and Ballast Tester Kit, Electronic, T2 to T12 Fluorescent, Bi-Pin Lamp, AA Alkaline Battery HSI#: TEL20257Out of stock$178.00$110.65Savings: $67.35 (38%)Discontinued -
![Klein® NCVT-4IR Non-Contact Voltage Tester with Infrared Thermometer, 1000 VAC Maximum Measurable Voltage]()
Klein® NCVT-4IR Non-Contact Voltage Tester with Infrared Thermometer, 1000 VAC Maximum Measurable Voltage HSI#: THA36185Call for availability$44.05$44.05 -
![Greenlee® GT-16 Adjustable Non-Contact Voltage Detector, 5 to 1000 VAC, LED/Tone, Cat IV 1000 VAC, Plastic]()
Greenlee® GT-16 Adjustable Non-Contact Voltage Detector, 5 to 1000 VAC, LED/Tone, Cat IV 1000 VAC, Plastic HSI#: GT-16-11113Call for availability$43.90$43.90 -
![Klein® ET250 Digital Voltage Continuity Tester, 2 to 600 VAC/VDC, Digital LCD Display]()
Klein® ET250 Digital Voltage Continuity Tester, 2 to 600 VAC/VDC, Digital LCD Display HSI#: TEM45500Call for availability$49.97$49.97 -
![General® 145 Single Revolution dial Caliper, 0 to 6 in, Graduation 0.001 in, 1-3/16 in D Jaw]()
General® 145 Single Revolution dial Caliper, 0 to 6 in, Graduation 0.001 in, 1-3/16 in D Jaw HSI#: THA24620Call for availability$46.49$46.49 -
![Amprobe® RS-1007 PRO Clamp-On Meter, Analog, 15 to 1000 A, 150 to 600 VAC Electrical Rating, 1000 Ohm Resistance]()
Amprobe® RS-1007 PRO Clamp-On Meter, Analog, 15 to 1000 A, 150 to 600 VAC Electrical Rating, 1000 Ohm Resistance HSI#: RS-1007 PRO-12285Call for availability$334.56$334.56 -
![Amprobe® ACD-6 PRO Clamp-On Meter, Digital, 400 to 1000 A, 600 VAC, 4 to 600 VDC, 400 MVDC Electrical Rating, 400 Ohm, 4 to 400 kOhm]()
Amprobe® ACD-6 PRO Clamp-On Meter, Digital, 400 to 1000 A, 600 VAC, 4 to 600 VDC, 400 MVDC Electrical Rating, 400 Ohm, 4 to 400 kOhm HSI#: ACD-6 PRO-12285Call for availability$173.76$173.76 -
![Amprobe® ACD-23SW Clamp-On Meter, True RMS, 40 to 400 A, 4 to 600 VAC/VDC, 400 MVDC, 400 Ohm, 4 to 400 kOhm, 4 to 40 MOhm]()
Amprobe® ACD-23SW Clamp-On Meter, True RMS, 40 to 400 A, 4 to 600 VAC/VDC, 400 MVDC, 400 Ohm, 4 to 400 kOhm, 4 to 40 MOhm HSI#: ACD-23SW-12285Call for availability$283.01$283.01 -
![Amprobe® TL35B Test Lead, Safety Rating: CAT III 1000 V, 40 in Overall Length, PVC, Black/Red]()
Amprobe® TL35B Test Lead, Safety Rating: CAT III 1000 V, 40 in Overall Length, PVC, Black/Red HSI#: TL35B-12285Call for availability$39.41$39.41 -
![Amprobe® PY-1A AC/DC Voltage Tester, Maximum Measurable Voltage: 480 VAC/VDC, 4 Neon Bulb Light Source, Bright Neon Bulb, 0 to 65 Hz]()
Amprobe® PY-1A AC/DC Voltage Tester, Maximum Measurable Voltage: 480 VAC/VDC, 4 Neon Bulb Light Source, Bright Neon Bulb, 0 to 65 Hz HSI#: PY-1A-12285Call for availability$14.14$14.14 -
![Amprobe® LM-200LED LED Light Meter, 200, 2000, 20000, 200000 Lux; 20, 200, 2000, 20000 Foot Candle, +/- 3% Accuracy, LCD Display]()
Amprobe® LM-200LED LED Light Meter, 200, 2000, 20000, 200000 Lux; 20, 200, 2000, 20000 Foot Candle, +/- 3% Accuracy, LCD Display HSI#: LM-200LED-12285Call for availability$228.43$228.43 -
![Amprobe® Carrying Case, Soft Pouch Zipper Closure, 15.6 in Length, 6-1/2 in Width, 1/2 in D, Black]()
Amprobe® Carrying Case, Soft Pouch Zipper Closure, 15.6 in Length, 6-1/2 in Width, 1/2 in D, Black HSI#: CC-ACDC-12285Call for availability$47.49$47.49 -
![Dixon® TT3ASG 1 Side Beveled Flanged Sight Flow Indicator, 1-3/4 in dia Sight, 3 in TTMA Connection, 150 psi Working]()
Dixon® TT3ASG 1 Side Beveled Flanged Sight Flow Indicator, 1-3/4 in dia Sight, 3 in TTMA Connection, 150 psi Working HSI#: TT3ASG-10639Call for availability$115.38$115.38 -
![Dixon® B54BMP-SK400 Seal Kit, 4 in, Use with B54BMP In-Line Sight Glass, Buna-N, Black]()
Dixon® B54BMP-SK400 Seal Kit, 4 in, Use with B54BMP In-Line Sight Glass, Buna-N, Black HSI#: B54BMP-SK400-10639Call for availability$11.85$11.85 -
![Dixon® B54BMP-SK100 Seal Kit, 1 in, Use with B54BMP In-Line Sight Glass, Buna-N, Black]()
Dixon® B54BMP-SK100 Seal Kit, 1 in, Use with B54BMP In-Line Sight Glass, Buna-N, Black HSI#: B54BMP-SK100-10639Call for availability$8.72$8.72 -
![Dixon® FT620 Rack Cord Plug, Use with API Compatible Rack Cord]()
Dixon® FT620 Rack Cord Plug, Use with API Compatible Rack Cord HSI#: FT620-10639Call for availability$1,396.83$1,396.83 -
![Empire® E250M True Blue® Professional Combination Square, 30 cm L x 5-1/4 in W, SS Blade]()
Empire® E250M True Blue® Professional Combination Square, 30 cm L x 5-1/4 in W, SS Blade HSI#: E250M-11961Call for availability$13.85$13.85 -
![Fluke® H5 Electrical Tester Holster, T5, 192 mm Length, 90 mm Width, 38 mm D, Fabric, Black/Yellow]()
Fluke® H5 Electrical Tester Holster, T5, 192 mm Length, 90 mm Width, 38 mm D, Fabric, Black/Yellow HSI#: H5-12285Call for availability$54.87$54.87 -
![Fluke-A3003FC Current Clamp Meter Clamp Meter, LCD w/backlight 3-1/2 digits Display, sheetrock wall (up to 6.5 m)]()
Fluke-A3003FC Current Clamp Meter Clamp Meter, LCD w/backlight 3-1/2 digits Display, sheetrock wall (up to 6.5 m) HSI#: FLK-A3003FC-12285Call for availability$770.43$770.43 -
![Fluke® FLUKE-376 FC Clamp Meter, Wireless, 999.9 a Electrical Rating, 60 kOhm Resistance, 10 to 100/100 to 500 Hz Frequency]()
Fluke® FLUKE-376 FC Clamp Meter, Wireless, 999.9 a Electrical Rating, 60 kOhm Resistance, 10 to 100/100 to 500 Hz Frequency HSI#: FLUKE-376 FC-12285Call for availability$696.55$696.55 -
![Fluke® FLUKE-902 FC Clamp Meter, HVAC Wireless, 0.01/0.1 A, 600 VAC/VDC, 600/6000/60 kOhm, 2% +/-5 Digit at 45 to 65 Hz]()
Fluke® FLUKE-902 FC Clamp Meter, HVAC Wireless, 0.01/0.1 A, 600 VAC/VDC, 600/6000/60 kOhm, 2% +/-5 Digit at 45 to 65 Hz HSI#: FLUKE-902 FC-12285Call for availability$411.59$411.59 -
![Fluke® TL40 Test Lead Set, 4-Piece Retractable Tip, For Use With: any Multimeter, 3 A, 600 VAC, Silicone Insulation, 48 in OAL]()
Fluke® TL40 Test Lead Set, 4-Piece Retractable Tip, For Use With: any Multimeter, 3 A, 600 VAC, Silicone Insulation, 48 in OAL HSI#: TL40-12285Call for availability$72.81$72.81 -
![Fluke® TL223-1 SureGrip™ Electrical Test Lead Set, All-in-One, Series, For Use With: Fluke® 1550B Mega ohmmeter, Amperage Rating]()
Fluke® TL223-1 SureGrip™ Electrical Test Lead Set, All-in-One, Series, For Use With: Fluke® 1550B Mega ohmmeter, Amperage Rating HSI#: TL223-1-12285Call for availability$116.08$116.08 -
![Fluke® VPC-10A Voltage Tester Voltage Detector, 600 V]()
Fluke® VPC-10A Voltage Tester Voltage Detector, 600 V HSI#: VPC-10A-12285Call for availability$50.53$50.53 -
![Fluke® T5-H5-1AC KIT/US Electrical Tester Kit, 3% +/-3 Counts at AC Current (50/60 Hz), 1.5% +/-2 Counts at VAC, 1% +/-1 Count at VDC Accuracy]()
Fluke® T5-H5-1AC KIT/US Electrical Tester Kit, 3% +/-3 Counts at AC Current (50/60 Hz), 1.5% +/-2 Counts at VAC, 1% +/-1 Count at VDC Accuracy HSI#: T5-H5-1AC KIT/US-12285Call for availability$272.06$272.06 -
![Fluke® C280 Carrying Case, Soft Zipper Closure, 9 in Length, 7-5/16 in Width, 14.57 in D, Polyester, Black/Yellow, Resists: Weather]()
Fluke® C280 Carrying Case, Soft Zipper Closure, 9 in Length, 7-5/16 in Width, 14.57 in D, Polyester, Black/Yellow, Resists: Weather HSI#: C280-12285Call for availability$67.53$67.53 -
![Greenlee® 12853 Circuit Tracer Extension Lead, 0 to 750 VAC/VDC]()
Greenlee® 12853 Circuit Tracer Extension Lead, 0 to 750 VAC/VDC HSI#: 12853-11113Call for availability$87.90$87.90 -
![Greenlee® CMI-600-C AC Non-Contact Clamp Meter, 60/600 A at 600 VAC/VDC, 600 Ohm/6/60 kOhm, 50/60 Hz, 1.18 in Jaw, LCD Display]()
Greenlee® CMI-600-C AC Non-Contact Clamp Meter, 60/600 A at 600 VAC/VDC, 600 Ohm/6/60 kOhm, 50/60 Hz, 1.18 in Jaw, LCD Display HSI#: CMI-600-C-11113Call for availability$487.48$487.48 -
![Greenlee® CMI-1000 Standard Clamp Meter, 60/600/1000 A at 600/1000 VAC/VDC, 600 Ohm/6/60 kOhm, 40/50 Hz, 2 in Jaw, LCD Display]()
Greenlee® CMI-1000 Standard Clamp Meter, 60/600/1000 A at 600/1000 VAC/VDC, 600 Ohm/6/60 kOhm, 40/50 Hz, 2 in Jaw, LCD Display HSI#: CMI-1000-11113Call for availability$473.67$473.67 -
![Greenlee® 11372 Replacement Test Lead, for Use with CMT-80 and CSJ-100 AC Open Jaw Clamp Meter, 20 MOhm Resistance, 400 A, 600 VAC/DC]()
Greenlee® 11372 Replacement Test Lead, for Use with CMT-80 and CSJ-100 AC Open Jaw Clamp Meter, 20 MOhm Resistance, 400 A, 600 VAC/DC HSI#: 11372-11113Call for availability$32.72$32.72 -
![Greenlee® TC-15 Deluxe™ Testers and Clamps Case Kit with Carry Strap and Double-Stitched Belt Loop, 11-1/4 in L x 3 in W x 2 in D]()
Greenlee® TC-15 Deluxe™ Testers and Clamps Case Kit with Carry Strap and Double-Stitched Belt Loop, 11-1/4 in L x 3 in W x 2 in D HSI#: TC-15-11113Call for availability$26.19$26.19 -
![Klein® VDV001819 VDV Professional Apprentice Tool Set with Scout™ Pro 3, 6 pcs]()
Klein® VDV001819 VDV Professional Apprentice Tool Set with Scout™ Pro 3, 6 pcs HSI#: VDV001819-11611Call for availability$273.40$273.40 -
![Klein® RT310 AFCI/GFCI Outlet Tester, 120 VAC, Visual Indicator, Safety Rating: CAT III 135V, 7.4 in L x 2.3 in W x 1.3 in H Dimensions]()
Klein® RT310 AFCI/GFCI Outlet Tester, 120 VAC, Visual Indicator, Safety Rating: CAT III 135V, 7.4 in L x 2.3 in W x 1.3 in H Dimensions HSI#: RT310-11611Call for availability$44.99$44.99
The browser you are using is not compatible with our site. For a better experience on our website please use one of these browsers:
Google Chrome | Microsoft Edge | Mozilla Firefox | Apple Safari Update Browser
Google Chrome | Microsoft Edge | Mozilla Firefox | Apple Safari Update Browser
Toggle Nav
Questions? Give Us A Call
Rigging Solutions
HSI Services
Shop by brand
FEATURED BRANDS
Resources
About Us
- All Products
- Slings, Lifting & Rigging
- Fall Protection
- Construction Supply / Jobsite Ops
-
Safety & Security
-
Power Tools
-
Hand Tools
Featured Products
-
![Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL]()
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
-
![Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL]()
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
-
![Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade]()
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
-
![Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple]()
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
-
![Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle]()
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
-
-
Material Handling, Hydraulics & Storage
- MRO Supplies
- Cutting Tools & Metalworking
- Abrasives
-
Fasteners & Hardware
Featured Products
-
![DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated]()
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
-
![BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy]()
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
-
![BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS]()
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
-
![Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank]()
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
-
![Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade]()
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
-
Search
Quick Order Pad
