Hanes Supply, Sling and Rigging Specialists
Complete Contractor & Industrial Supplier Since 1930.      Let us be Your Sling and Rigging Specialists
s Hanes Services
Wire Rope Information
Sling Information
Technical Bulletins
Fire Extinguisher Services
Services
Technical Master Catalog - PDF
What's New
About Us
Featured Projects

Twin Path Slings


SLINGMAX RIGGING SOLUTIONS
Click Here To Shop For Twin Path® Slings

TWIN-PATH® EXTRA SLING WITH COVERMAX
AND K-SPEC® Core Yarn TPXC

TWIN-PATH® EXTRA SLING WITH COVERMAX

This is the world’s first truly ergonomic sling. It has a bulked nylon outer cover for superior abrasion resistance. These are made in sizes up to 500,000 lbs. vertical rated capacity. Larger capacity slings are available on special order. Extra Heavy Duty Covermax® is standard on 40,000 lb. vertical capacity and higher. These slings have overload tell-tails, inner red cover, and are used worldwide in place of wire rope slings for heavy lifts. They are about 10% of the weight of a steel sling. These products are repairable. The Twin-Path® patented design provides the rigger with two connections between the hook and the load for redundant back-up protection. These slings have 1% stretch at rated capacity compared to braided polyester round slings which can stretch up to 9%. If ergonomics, productivity and safety are important, then these slings are the only choice. This is the lightest and strongest sling on the market today with K-Spec® the longest lasting load bearing core yarn, backed by independent testing. All slings have fiber optic internal inspection system.

TPXC This is our best synthetic sling. It is made with K-Spec® high performance fibers, and it has a bulked nylon outer cover (Covermax®) that is very abrasion resistant. These are made in sizes up to 500,000 lbs. vertical rated capacity. Extra Heavy Duty Covermax® is used on 40,000 lb. vertical capacity and higher. All of these slings have overload tell-tails, inner red cover, and are used worldwide in place of chain and wire rope slings for heavy lifts. Also, they are repairable. They have fiber optics for inspection. The Twin-Path® patented design provides the rigger with redundant protection in the event that one path is cut. These slings have 1% stretch at rated capacity and are made in matched lengths. These slings conform to ASME B30.9 Chapter six, US Navy NAVFAC P-307 Section 14, and CI 1905-07. The safety and inspection features found only in Twin-Path® products were created to overcome shortfalls riggers found in single path roundslings.

Twin-Path® Slings
Mechanical / Rigging Considerations

Twin-Path® Slings
Inspection Before Use


2000 Hanes Supply, Inc. All Rights Reserved Home | Product and Recall Notices | HWM Award | Contact Us | Careers Privacy Policy
Terms of Use
Catalog Request | Store Locations | Quote Request | Shipping
“To the extent applicable, all parties agree that they will abide by the provisions 29 CFR Part 471 Appendix A to Subpart A. Additionally, this contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a), 60-300.10 and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability.”